Initial project setup

managed_components/espressif__tinyusb/hw/bsp/stm32f4/family.mk

@@ -0,0 +1,80 @@
+UF2_FAMILY_ID = 0x57755a57
+ST_FAMILY = f4
+
+ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
+ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
+
+include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m4
+
+# ----------------------
+# Port & Speed Selection
+# ----------------------
+RHPORT_SPEED ?= OPT_MODE_FULL_SPEED OPT_MODE_FULL_SPEED
+RHPORT_DEVICE ?= 0
+RHPORT_HOST ?= 0
+
+# Determine RHPORT_DEVICE_SPEED if not defined
+ifndef RHPORT_DEVICE_SPEED
+ifeq ($(RHPORT_DEVICE), 0)
+  RHPORT_DEVICE_SPEED = $(firstword $(RHPORT_SPEED))
+else
+  RHPORT_DEVICE_SPEED = $(lastword $(RHPORT_SPEED))
+endif
+endif
+
+# Determine RHPORT_HOST_SPEED if not defined
+ifndef RHPORT_HOST_SPEED
+ifeq ($(RHPORT_HOST), 0)
+  RHPORT_HOST_SPEED = $(firstword $(RHPORT_SPEED))
+else
+  RHPORT_HOST_SPEED = $(lastword $(RHPORT_SPEED))
+endif
+endif
+
+# --------------
+# Compiler Flags
+# --------------
+CFLAGS += \
+  -DCFG_TUSB_MCU=OPT_MCU_STM32F4 \
+	-DBOARD_TUD_RHPORT=${RHPORT_DEVICE} \
+	-DBOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} \
+	-DBOARD_TUH_RHPORT=${RHPORT_HOST} \
+	-DBOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} \
+
+# GCC Flags
+CFLAGS_GCC += \
+  -flto \
+
+# suppress warning caused by vendor mcu driver
+CFLAGS_GCC += -Wno-error=cast-align
+
+LDFLAGS_GCC += \
+  -nostdlib -nostartfiles \
+  --specs=nosys.specs --specs=nano.specs
+
+# -----------------
+# Sources & Include
+# -----------------
+
+SRC_C += \
+	src/portable/synopsys/dwc2/dcd_dwc2.c \
+	src/portable/synopsys/dwc2/hcd_dwc2.c \
+	src/portable/synopsys/dwc2/dwc2_common.c \
+	$(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_dma.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c
+
+INC += \
+	$(TOP)/$(BOARD_PATH) \
+	$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
+	$(TOP)/$(ST_CMSIS)/Include \
+	$(TOP)/$(ST_HAL_DRIVER)/Inc
+
+# flash target using on-board stlink
+flash: flash-stlink