Initial project setup

2025-12-13 11:59:11 +02:00
commit 3218e6039f
2176 changed files with 355321 additions and 0 deletions
--- a/managed_components/espressif__tinyusb/hw/bsp/nrf/boards/pca10056/board.cmake
+++ b/managed_components/espressif__tinyusb/hw/bsp/nrf/boards/pca10056/board.cmake
@@ -0,0 +1,10 @@
+set(MCU_VARIANT nrf52840)
+
+function(update_board TARGET)
+endfunction()
+
+#board_runner_args(jlink "--device=nRF52840_xxAA" "--speed=4000")
+#include(${ZEPHYR_BASE}/boards/common/nrfjprog.board.cmake)
+#include(${ZEPHYR_BASE}/boards/common/nrfutil.board.cmake)
+#include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)
+#include(${ZEPHYR_BASE}/boards/common/openocd-nrf5.board.cmake)
--- a/managed_components/espressif__tinyusb/hw/bsp/nrf/boards/pca10056/board.h
+++ b/managed_components/espressif__tinyusb/hw/bsp/nrf/boards/pca10056/board.h
@@ -0,0 +1,65 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   name: Nordic nRF52840DK
+   url: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK
+*/
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#define _PINNUM(port, pin)    ((port)*32 + (pin))
+
+// LED
+#define LED_PIN               13
+#define LED_STATE_ON          0
+
+// Button
+#define BUTTON_PIN            25 // button 4
+#define BUTTON_STATE_ACTIVE   0
+
+// UART
+#define UART_RX_PIN           8
+#define UART_TX_PIN           6
+
+// SPI for USB host shield
+// Pin is correct but not working probably due to signal incompatible (1.8V 3v3) with MAC3421E !?
+//#define MAX3421_SCK_PIN  _PINNUM(1, 15)
+//#define MAX3421_MOSI_PIN _PINNUM(1, 13)
+//#define MAX3421_MISO_PIN _PINNUM(1, 14)
+//#define MAX3421_CS_PIN   _PINNUM(1, 12)
+//#define MAX3421_INTR_PIN _PINNUM(1, 11)
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */
--- a/managed_components/espressif__tinyusb/hw/bsp/nrf/boards/pca10056/board.mk
+++ b/managed_components/espressif__tinyusb/hw/bsp/nrf/boards/pca10056/board.mk
@@ -0,0 +1,7 @@
+MCU_VARIANT = nrf52840
+CFLAGS += -DNRF52840_XXAA
+
+LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52840_xxaa.ld
+
+# flash using jlink
+flash: flash-jlink
--- a/managed_components/espressif__tinyusb/hw/bsp/nrf/boards/pca10056/ozone/nrf52840.jdebug
+++ b/managed_components/espressif__tinyusb/hw/bsp/nrf/boards/pca10056/ozone/nrf52840.jdebug
@@ -0,0 +1,238 @@
+
+/*********************************************************************
+*
+*       OnProjectLoad
+*
+* Function description
+*   Project load routine. Required.
+*
+**********************************************************************
+*/
+void OnProjectLoad (void) {
+  // Dialog-generated settings
+  Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M4F.svd");
+  Project.AddSvdFile ("$(InstallDir)/Config/Peripherals/ARMv7M.svd");
+
+  Project.SetDevice ("nRF52840_xxAA");
+  Project.SetHostIF ("USB", "");
+  Project.SetTargetIF ("SWD");
+  Project.SetTIFSpeed ("8 MHz");
+  Project.SetTraceSource ("Trace Pins");
+  Project.SetTracePortWidth (4);
+
+  // User settings
+  File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-pca10056/cdc_msc.elf");
+}
+
+/*********************************************************************
+*
+*      TargetReset
+*
+* Function description
+*   Replaces the default target device reset routine. Optional.
+*
+* Notes
+*   This example demonstrates the usage when
+*   debugging a RAM program on a Cortex-M target device
+*
+**********************************************************************
+*/
+//void TargetReset (void) {
+//
+//  unsigned int SP;
+//  unsigned int PC;
+//  unsigned int VectorTableAddr;
+//
+//  Exec.Reset();
+//
+//  VectorTableAddr = Elf.GetBaseAddr();
+//
+//  if (VectorTableAddr != 0xFFFFFFFF) {
+//
+//    Util.Log("Resetting Program.");
+//
+//    SP = Target.ReadU32(VectorTableAddr);
+//    Target.SetReg("SP", SP);
+//
+//    PC = Target.ReadU32(VectorTableAddr + 4);
+//    Target.SetReg("PC", PC);
+//  }
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetReset
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetReset (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetReset
+*
+* Function description
+*   Event handler routine.
+*    - Sets the PC register to program reset value.
+*    - Sets the SP register to program reset value on Cortex-M.
+*
+**********************************************************************
+*/
+void AfterTargetReset (void) {
+  unsigned int SP;
+  unsigned int PC;
+  unsigned int VectorTableAddr;
+
+  VectorTableAddr = Elf.GetBaseAddr();
+
+  if (VectorTableAddr == 0xFFFFFFFF) {
+    Util.Log("Project file error: failed to get program base");
+  } else {
+    SP = Target.ReadU32(VectorTableAddr);
+    Target.SetReg("SP", SP);
+
+    PC = Target.ReadU32(VectorTableAddr + 4);
+    Target.SetReg("PC", PC);
+  }
+}
+
+/*********************************************************************
+*
+*       DebugStart
+*
+* Function description
+*   Replaces the default debug session startup routine. Optional.
+*
+**********************************************************************
+*/
+//void DebugStart (void) {
+//}
+
+/*********************************************************************
+*
+*       TargetConnect
+*
+* Function description
+*   Replaces the default target IF connection routine. Optional.
+*
+**********************************************************************
+*/
+//void TargetConnect (void) {
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetConnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+void BeforeTargetConnect (void) {
+}
+
+/*********************************************************************
+*
+*       AfterTargetConnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetConnect (void) {
+//}
+
+/*********************************************************************
+*
+*       TargetDownload
+*
+* Function description
+*   Replaces the default program download routine. Optional.
+*
+**********************************************************************
+*/
+//void TargetDownload (void) {
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetDownload
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetDownload (void) {
+//}
+
+/*********************************************************************
+*
+*      AfterTargetDownload
+*
+* Function description
+*   Event handler routine.
+*    - Sets the PC register to program reset value.
+*    - Sets the SP register to program reset value on Cortex-M.
+*
+**********************************************************************
+*/
+void AfterTargetDownload (void) {
+  unsigned int SP;
+  unsigned int PC;
+  unsigned int VectorTableAddr;
+
+  VectorTableAddr = Elf.GetBaseAddr();
+
+  if (VectorTableAddr == 0xFFFFFFFF) {
+    Util.Log("Project file error: failed to get program base");
+  } else {
+    SP = Target.ReadU32(VectorTableAddr);
+    Target.SetReg("SP", SP);
+
+    PC = Target.ReadU32(VectorTableAddr + 4);
+    Target.SetReg("PC", PC);
+  }
+}
+
+/*********************************************************************
+*
+*       BeforeTargetDisconnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetDisconnect (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetDisconnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetDisconnect (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetHalt
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetHalt (void) {
+//}