Initial project setup

managed_components/espressif__tinyusb/hw/bsp/mcx/family.mk

@@ -0,0 +1,67 @@
+UF2_FAMILY_ID = 0x2abc77ec
+SDK_DIR = hw/mcu/nxp/mcux-sdk
+
+include $(TOP)/$(BOARD_PATH)/board.mk
+
+# Default to Highspeed PORT1
+PORT ?= 1
+
+CFLAGS += \
+  -flto \
+  -DBOARD_TUD_RHPORT=$(PORT) \
+
+# mcu driver cause following warnings
+CFLAGS += -Wno-error=unused-parameter -Wno-error=old-style-declaration
+
+LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs
+
+# All source paths should be relative to the top level.
+LD_FILE ?= $(SDK_DIR)/devices/$(MCU_VARIANT)/gcc/$(MCU_CORE)_flash.ld
+
+# TinyUSB: Port0 is chipidea FS, Port1 is chipidea HS
+ifeq ($(PORT), 1)
+  $(info "PORT1 High Speed")
+  CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED
+	SRC_C += src/portable/chipidea/ci_hs/dcd_ci_hs.c
+else
+  $(info "PORT0 Full Speed")
+  CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED
+  SRC_C += src/portable/chipidea/ci_fs/dcd_ci_fs.c
+endif
+
+SRC_C += \
+	$(SDK_DIR)/devices/$(MCU_VARIANT)/system_$(MCU_CORE).c \
+	$(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_clock.c \
+	$(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_reset.c \
+	${SDK_DIR}/drivers/gpio/fsl_gpio.c \
+	${SDK_DIR}/drivers/lpuart/fsl_lpuart.c \
+	${SDK_DIR}/drivers/common/fsl_common_arm.c\
+	hw/bsp/mcx/drivers/spc/fsl_spc.c
+
+# fsl_lpflexcomm for MCXN9
+ifeq ($(MCU_VARIANT), MCXN947)
+	SRC_C += ${SDK_DIR}/drivers/lpflexcomm/fsl_lpflexcomm.c
+endif
+
+# fsl_spc for MCXNA15
+ifeq ($(MCU_VARIANT), MCXA153)
+
+endif
+
+INC += \
+	$(TOP)/$(BOARD_PATH) \
+	$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
+	$(TOP)/$(SDK_DIR)/devices/$(MCU_VARIANT) \
+	$(TOP)/$(SDK_DIR)/devices/$(MCU_VARIANT)/drivers \
+	$(TOP)/$(SDK_DIR)/drivers/ \
+	$(TOP)/$(SDK_DIR)/drivers/lpuart \
+	$(TOP)/$(SDK_DIR)/drivers/lpflexcomm \
+  	$(TOP)/$(SDK_DIR)/drivers/common\
+  	$(TOP)/$(SDK_DIR)/drivers/gpio\
+  	$(TOP)/$(SDK_DIR)/drivers/port\
+   	$(TOP)/hw/bsp/mcx/drivers/spc
+
+
+
+
+SRC_S += $(SDK_DIR)/devices/$(MCU_VARIANT)/gcc/startup_$(MCU_CORE).S