Initial project setup

managed_components/espressif__tinyusb/hw/bsp/lpc15/family.c

@@ -0,0 +1,145 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   manufacturer: NXP
+*/
+
+#ifdef __GNUC__
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wstrict-prototypes"
+  #pragma GCC diagnostic ignored "-Wunused-parameter"
+#endif
+
+#include "chip.h"
+
+#ifdef __GNUC__
+  #pragma GCC diagnostic pop
+#endif
+
+#include "bsp/board_api.h"
+#include "board.h"
+
+//--------------------------------------------------------------------+
+// Forward USB interrupt events to TinyUSB IRQ Handler
+//--------------------------------------------------------------------+
+void USB_IRQHandler(void)
+{
+  tud_int_handler(0);
+}
+
+//--------------------------------------------------------------------+
+// MACRO TYPEDEF CONSTANT ENUM
+//--------------------------------------------------------------------+
+
+/* System oscillator rate and RTC oscillator rate */
+const uint32_t OscRateIn = XTAL_OscRateIn;
+const uint32_t RTCOscRateIn = XTAL_RTCOscRateIn;
+
+// Invoked by startup code
+void SystemInit(void)
+{
+  Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_SRAM1);
+  Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_SRAM2);
+  Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON);
+  Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_SWM);
+  Chip_SYSCTL_PeriphReset(RESET_IOCON);
+
+  board_lpc15_pinmux_swm_init();
+
+  Chip_SetupXtalClocking();
+}
+
+void board_init(void)
+{
+  SystemCoreClockUpdate();
+
+  // 1ms tick timer
+  SysTick_Config(SystemCoreClock / 1000);
+
+#if CFG_TUSB_OS == OPT_OS_FREERTOS
+  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
+  NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
+#endif
+
+  Chip_GPIO_Init(LPC_GPIO);
+
+  // LED
+  Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN);
+
+  // Button
+  Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN);
+
+	// UART
+	Chip_Clock_SetUARTBaseClockRate(Chip_Clock_GetMainClockRate(), false);
+	Chip_UART_Init(UART_PORT);
+	Chip_UART_ConfigData(UART_PORT, UART_CFG_DATALEN_8 | UART_CFG_PARITY_NONE | UART_CFG_STOPLEN_1);
+	Chip_UART_SetBaud(UART_PORT, CFG_BOARD_UART_BAUDRATE);
+	Chip_UART_Enable(UART_PORT);
+	Chip_UART_TXEnable(UART_PORT);
+
+  // USB: Setup PLL clock, and power
+  Chip_USB_Init();
+}
+
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+
+void board_led_write(bool state)
+{
+  Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state);
+}
+
+uint32_t board_button_read(void)
+{
+  // active low
+  return Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN) ? 0 : 1;
+}
+
+int board_uart_read(uint8_t* buf, int len)
+{
+  (void) buf; (void) len;
+  return 0;
+}
+
+int board_uart_write(void const * buf, int len)
+{
+  return Chip_UART_SendBlocking(UART_PORT, buf, len);
+}
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+volatile uint32_t system_ticks = 0;
+void SysTick_Handler (void)
+{
+  system_ticks++;
+}
+
+uint32_t board_millis(void)
+{
+  return system_ticks;
+}
+#endif