Initial project setup

managed_components/espressif__tinyusb/hw/bsp/da1469x/family.mk

@@ -0,0 +1,62 @@
+MCU_DIR = hw/mcu/dialog/da1469x
+
+include $(TOP)/$(BOARD_PATH)/board.mk
+
+CFLAGS += \
+  -flto \
+  -mthumb \
+  -mthumb-interwork \
+  -mabi=aapcs \
+  -mcpu=cortex-m33+nodsp \
+  -mfloat-abi=hard \
+  -mfpu=fpv5-sp-d16 \
+  -DCORE_M33 \
+  -DCFG_TUSB_MCU=OPT_MCU_DA1469X \
+  -DCFG_TUD_ENDPOINT0_SIZE=8\
+
+LDFLAGS_GCC += \
+  -nostdlib \
+  --specs=nosys.specs --specs=nano.specs
+
+# All source paths should be relative to the top level.
+LD_FILE = $(FAMILY_PATH)/linker/da1469x.ld
+
+# While this is for da1469x chip, there is chance that da1468x chip family will also work
+SRC_C += \
+	src/portable/dialog/da146xx/dcd_da146xx.c \
+	${MCU_DIR}/src/system_da1469x.c \
+	${MCU_DIR}/src/da1469x_clock.c \
+	${MCU_DIR}/src/hal_gpio.c \
+
+SRC_S += $(FAMILY_PATH)/gcc_startup_da1469x.S
+
+INC += \
+	$(TOP)/$(BOARD_PATH) \
+	$(TOP)/${MCU_DIR}/include \
+	$(TOP)/${MCU_DIR}/SDK_10.0.8.105/sdk/bsp/include
+
+# For freeRTOS port source
+FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM33_NTZ/non_secure
+
+# flash using jlink but with some twists
+flash: flash-dialog
+
+# SDK_BINARY_PATH is the path to the SDK binary files
+SDK_BINARY_PATH = $(HOME)/code/tinyusb-mcu-driver/dialog/SDK_10.0.8.105/binaries
+MKIMAGE = $(SDK_BINARY_PATH)/mkimage
+
+$(BUILD)/$(PROJECT)-image.bin: $(BUILD)/$(PROJECT).bin
+	@echo '#define SW_VERSION "v_1.0.0.1"' >$(BUILD)/version.h
+	@echo '#define SW_VERSION_DATE "'`date +"%Y-%m-%d %H:%M"`'"' >> $(BUILD)/version.h
+	$(MKIMAGE) da1469x $^ $(BUILD)/version.h $^.img
+	cp $(TOP)/$(FAMILY_PATH)/product_header.dump $(BUILD)/$(PROJECT)-image.bin
+	cat $^.img >> $(BUILD)/$(PROJECT)-image.bin
+
+flash-dialog: $(BUILD)/$(PROJECT)-image.bin
+	@echo r > $(BUILD)/$(BOARD).jlink
+	@echo halt >> $(BUILD)/$(BOARD).jlink
+	@echo loadfile $^ 0x16000000 >> $(BUILD)/$(BOARD).jlink
+	@echo r >> $(BUILD)/$(BOARD).jlink
+	@echo go >> $(BUILD)/$(BOARD).jlink
+	@echo exit >> $(BUILD)/$(BOARD).jlink
+	$(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $(BUILD)/$(BOARD).jlink