Initial project setup

managed_components/espressif__tinyusb/hw/bsp/ansi_escape.h

@@ -0,0 +1,97 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/** \ingroup group_board
+ *  \defgroup group_ansi_esc ANSI Escape Code
+ *  @{ */
+
+#ifndef _TUSB_ANSI_ESC_CODE_H_
+#define _TUSB_ANSI_ESC_CODE_H_
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#define CSI_CODE(seq)   "\33[" seq
+#define CSI_SGR(x)      CSI_CODE(#x) "m"
+
+//------------- Cursor movement -------------//
+/** \defgroup group_ansi_cursor Cursor Movement
+ *  @{ */
+#define ANSI_CURSOR_UP(n)        CSI_CODE(#n "A")          ///< Move cursor up
+#define ANSI_CURSOR_DOWN(n)      CSI_CODE(#n "B")          ///< Move cursor down
+#define ANSI_CURSOR_FORWARD(n)   CSI_CODE(#n "C")          ///< Move cursor forward
+#define ANSI_CURSOR_BACKWARD(n)  CSI_CODE(#n "D")          ///< Move cursor backward
+#define ANSI_CURSOR_LINE_DOWN(n) CSI_CODE(#n "E")          ///< Move cursor to the beginning of the line (n) down
+#define ANSI_CURSOR_LINE_UP(n)   CSI_CODE(#n "F")          ///< Move cursor to the beginning of the line (n) up
+#define ANSI_CURSOR_POSITION(n, m) CSI_CODE(#n ";" #m "H") ///< Move cursor to position (n, m)
+/** @} */
+
+//------------- Screen -------------//
+/** \defgroup group_ansi_screen Screen Control
+ *  @{ */
+#define ANSI_ERASE_SCREEN(n)     CSI_CODE(#n "J") ///< Erase the screen
+#define ANSI_ERASE_LINE(n)       CSI_CODE(#n "K") ///< Erase the line (n)
+#define ANSI_SCROLL_UP(n)        CSI_CODE(#n "S") ///< Scroll the whole page up (n) lines
+#define ANSI_SCROLL_DOWN(n)      CSI_CODE(#n "T") ///< Scroll the whole page down (n) lines
+/** @} */
+
+//------------- Text Color -------------//
+/** \defgroup group_ansi_text Text Color
+ *  @{ */
+#define ANSI_TEXT_BLACK          CSI_SGR(30)
+#define ANSI_TEXT_RED            CSI_SGR(31)
+#define ANSI_TEXT_GREEN          CSI_SGR(32)
+#define ANSI_TEXT_YELLOW         CSI_SGR(33)
+#define ANSI_TEXT_BLUE           CSI_SGR(34)
+#define ANSI_TEXT_MAGENTA        CSI_SGR(35)
+#define ANSI_TEXT_CYAN           CSI_SGR(36)
+#define ANSI_TEXT_WHITE          CSI_SGR(37)
+#define ANSI_TEXT_DEFAULT        CSI_SGR(39)
+/** @} */
+
+//------------- Background Color -------------//
+/** \defgroup group_ansi_background Background Color
+ *  @{ */
+#define ANSI_BG_BLACK            CSI_SGR(40)
+#define ANSI_BG_RED              CSI_SGR(41)
+#define ANSI_BG_GREEN            CSI_SGR(42)
+#define ANSI_BG_YELLOW           CSI_SGR(43)
+#define ANSI_BG_BLUE             CSI_SGR(44)
+#define ANSI_BG_MAGENTA          CSI_SGR(45)
+#define ANSI_BG_CYAN             CSI_SGR(46)
+#define ANSI_BG_WHITE            CSI_SGR(47)
+#define ANSI_BG_DEFAULT          CSI_SGR(49)
+/** @} */
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_ANSI_ESC_CODE_H_ */
+
+/** @} */

managed_components/espressif__tinyusb/hw/bsp/at32f402_405/FreeRTOSConfig/FreeRTOSConfig.h

@@ -0,0 +1,177 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+// Include MCU header
+  #include "at32f402_405.h"
+
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU								        0
+#define configENABLE_FPU								        1
+#define configENABLE_TRUSTZONE					        0
+#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               4
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         1
+#define configSUPPORT_DYNAMIC_ALLOCATION        0
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+#define configCHECK_HANDLER_INSTALLATION       0
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+#ifdef __RX__
+/* Renesas RX series */
+#define vSoftwareInterruptISR					        INT_Excep_ICU_SWINT
+#define vTickISR								              INT_Excep_CMT0_CMI0
+#define configPERIPHERAL_CLOCK_HZ				      (configCPU_CLOCK_HZ/2)
+#define configKERNEL_INTERRUPT_PRIORITY			  1
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY	4
+
+#else
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+#if defined(__NVIC_PRIO_BITS)
+  // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h
+	#define configPRIO_BITS       __NVIC_PRIO_BITS
+
+#elif defined(__ECLIC_INTCTLBITS)
+  // RISC-V Bumblebee core from nuclei
+  #define configPRIO_BITS       __ECLIC_INTCTLBITS
+
+#elif defined(__IASMARM__)
+  // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS.
+  // Therefore we will hard coded it to minimum value of 2 to get pass ci build.
+  // IAR user must update this to correct value of the target MCU
+  #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU"
+  #define configPRIO_BITS       2
+
+#else
+  #error "FreeRTOS configPRIO_BITS to be defined"
+#endif
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
+
+#endif /* __FREERTOS_CONFIG__H */

managed_components/espressif__tinyusb/hw/bsp/at32f402_405/at32f402_405_clock.c

@@ -0,0 +1,127 @@
+/**
+  **************************************************************************
+  * @file     at32f402_405_clock.c
+  * @brief    system clock config program
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f402_405_clock.h"
+
+/**
+  * @brief  system clock config program
+  * @note   the system clock is configured as follow:
+  *         system clock (sclk)   = (hext * pll_ns)/(pll_ms * pll_fp)
+  *         system clock source   = pll (hext)
+  *         - hext                = HEXT_VALUE
+  *         - sclk                = 216000000
+  *         - ahbdiv              = 1
+  *         - ahbclk              = 216000000
+  *         - apb2div             = 1
+  *         - apb2clk             = 216000000
+  *         - apb1div             = 2
+  *         - apb1clk             = 108000000
+  *         - pll_ns              = 72
+  *         - pll_ms              = 1
+  *         - pll_fr              = 4
+  *         - flash_wtcyc         = 6 cycle
+  * @param  none
+  * @retval none
+  */
+void system_clock_config(void)
+{
+  /* reset crm */
+  crm_reset();
+
+  /* config flash psr register */
+  flash_psr_set(FLASH_WAIT_CYCLE_6);
+
+  /* enable pwc periph clock */
+  crm_periph_clock_enable(CRM_PWC_PERIPH_CLOCK, TRUE);
+
+  /* set power ldo output voltage to 1.3v */
+  pwc_ldo_output_voltage_set(PWC_LDO_OUTPUT_1V3);
+
+  crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
+
+  /* wait till hext is ready */
+  while(crm_hext_stable_wait() == ERROR)
+  {
+  }
+
+  /* if pll parameter has changed, please use the AT32_New_Clock_Configuration tool for new configuration. */
+  crm_pll_config(CRM_PLL_SOURCE_HEXT, 72, 1, CRM_PLL_FP_4);
+
+  /* config pllu div */
+  crm_pllu_div_set(CRM_PLL_FU_18);
+
+  /* enable pll */
+  crm_clock_source_enable(CRM_CLOCK_SOURCE_PLL, TRUE);
+
+  /* wait till pll is ready */
+  while(crm_flag_get(CRM_PLL_STABLE_FLAG) != SET)
+  {
+  }
+
+  /* config ahbclk */
+  crm_ahb_div_set(CRM_AHB_DIV_1);
+
+  /* config apb2clk, the maximum frequency of APB2 clock is 216 MHz */
+  crm_apb2_div_set(CRM_APB2_DIV_1);
+
+  /* config apb1clk, the maximum frequency of APB1 clock is 120 MHz */
+  crm_apb1_div_set(CRM_APB1_DIV_2);
+
+  /* enable auto step mode */
+  crm_auto_step_mode_enable(TRUE);
+
+  /* select pll as system clock source */
+  crm_sysclk_switch(CRM_SCLK_PLL);
+
+  /* wait till pll is used as system clock source */
+  while(crm_sysclk_switch_status_get() != CRM_SCLK_PLL)
+  {
+  }
+
+  /* disable auto step mode */
+  crm_auto_step_mode_enable(FALSE);
+
+  /* update system_core_clock global variable */
+  system_core_clock_update();
+
+#ifdef AT32F405xx
+  /*
+    AT32405 OTGHS PHY not initialized, resulting in high power consumption
+    Solutions:
+    1. If OTGHS is not used, call the "reduce_power_consumption" function to reduce power consumption.
+       PLL or HEXT should be enabled when calling this function.
+       Example: reduce_power_consumption();
+
+    2. If OTGHS is required, initialize OTGHS to reduce power consumption, without the need to call this function.
+
+       for more detailed information. please refer to the faq document FAQ0148.
+  */
+#endif
+
+#ifdef AT32F402xx
+  /* reduce power consumption */
+  reduce_power_consumption();
+#endif
+}

managed_components/espressif__tinyusb/hw/bsp/at32f402_405/at32f402_405_clock.h

@@ -0,0 +1,43 @@
+/**
+  **************************************************************************
+  * @file     at32f402_405_clock.h
+  * @brief    header file of clock program
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F402_405_CLOCK_H
+#define __AT32F402_405_CLOCK_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f402_405.h"
+
+/* exported functions ------------------------------------------------------- */
+void system_clock_config(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

managed_components/espressif__tinyusb/hw/bsp/at32f402_405/at32f402_405_conf.h

@@ -0,0 +1,151 @@
+/**
+  **************************************************************************
+  * @file     at32f402_405_conf.h
+  * @brief    at32f402_405 config header file
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F402_405_CONF_H
+#define __AT32F402_405_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+  * @brief in the following line adjust the value of high speed external crystal (hext)
+  * used in your application
+  *
+  * tip: to avoid modifying this file each time you need to use different hext, you
+  *      can define the hext value in your toolchain compiler preprocessor.
+  *
+  */
+#if !defined  HEXT_VALUE
+#define HEXT_VALUE                       ((uint32_t)12000000) /*!< value of the high speed external crystal in hz */
+#endif
+
+/**
+  * @brief in the following line adjust the high speed external crystal (hext) startup
+  * timeout value
+  */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed external clock in hz */
+
+#define SystemCoreClock                  system_core_clock
+
+/* module define -------------------------------------------------------------*/
+#define ACC_MODULE_ENABLED
+#define ADC_MODULE_ENABLED
+#define CAN_MODULE_ENABLED
+#define CRC_MODULE_ENABLED
+#define CRM_MODULE_ENABLED
+#define DEBUG_MODULE_ENABLED
+#define DMA_MODULE_ENABLED
+#define ERTC_MODULE_ENABLED
+#define EXINT_MODULE_ENABLED
+#define FLASH_MODULE_ENABLED
+#define GPIO_MODULE_ENABLED
+#define I2C_MODULE_ENABLED
+#define MISC_MODULE_ENABLED
+#define PWC_MODULE_ENABLED
+#define QSPI_MODULE_ENABLED
+#define SCFG_MODULE_ENABLED
+#define SPI_MODULE_ENABLED
+#define TMR_MODULE_ENABLED
+#define USART_MODULE_ENABLED
+#define USB_MODULE_ENABLED
+#define WDT_MODULE_ENABLED
+#define WWDT_MODULE_ENABLED
+
+/* includes ------------------------------------------------------------------*/
+#ifdef ACC_MODULE_ENABLED
+#include "at32f402_405_acc.h"
+#endif
+#ifdef ADC_MODULE_ENABLED
+#include "at32f402_405_adc.h"
+#endif
+#ifdef CAN_MODULE_ENABLED
+#include "at32f402_405_can.h"
+#endif
+#ifdef CRC_MODULE_ENABLED
+#include "at32f402_405_crc.h"
+#endif
+#ifdef CRM_MODULE_ENABLED
+#include "at32f402_405_crm.h"
+#endif
+#ifdef DEBUG_MODULE_ENABLED
+#include "at32f402_405_debug.h"
+#endif
+#ifdef DMA_MODULE_ENABLED
+#include "at32f402_405_dma.h"
+#endif
+#ifdef ERTC_MODULE_ENABLED
+#include "at32f402_405_ertc.h"
+#endif
+#ifdef EXINT_MODULE_ENABLED
+#include "at32f402_405_exint.h"
+#endif
+#ifdef FLASH_MODULE_ENABLED
+#include "at32f402_405_flash.h"
+#endif
+#ifdef GPIO_MODULE_ENABLED
+#include "at32f402_405_gpio.h"
+#endif
+#ifdef I2C_MODULE_ENABLED
+#include "at32f402_405_i2c.h"
+#endif
+#ifdef MISC_MODULE_ENABLED
+#include "at32f402_405_misc.h"
+#endif
+#ifdef PWC_MODULE_ENABLED
+#include "at32f402_405_pwc.h"
+#endif
+#ifdef QSPI_MODULE_ENABLED
+#include "at32f402_405_qspi.h"
+#endif
+#ifdef SCFG_MODULE_ENABLED
+#include "at32f402_405_scfg.h"
+#endif
+#ifdef SPI_MODULE_ENABLED
+#include "at32f402_405_spi.h"
+#endif
+#ifdef TMR_MODULE_ENABLED
+#include "at32f402_405_tmr.h"
+#endif
+#ifdef USART_MODULE_ENABLED
+#include "at32f402_405_usart.h"
+#endif
+#ifdef USB_MODULE_ENABLED
+#include "at32f402_405_usb.h"
+#endif
+#ifdef WDT_MODULE_ENABLED
+#include "at32f402_405_wdt.h"
+#endif
+#ifdef WWDT_MODULE_ENABLED
+#include "at32f402_405_wwdt.h"
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

managed_components/espressif__tinyusb/hw/bsp/at32f402_405/at32f402_405_int.c

@@ -0,0 +1,139 @@
+/**
+  **************************************************************************
+  * @file     at32f402_405_int.c
+  * @brief    main interrupt service routines.
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f402_405_int.h"
+
+/** @addtogroup AT32F405_periph_examples
+  * @{
+  */
+
+/** @addtogroup 405_USB_device_msc
+  * @{
+  */
+
+/**
+  * @brief  this function handles nmi exception.
+  * @param  none
+  * @retval none
+  */
+void NMI_Handler(void)
+{
+}
+
+/**
+  * @brief  this function handles hard fault exception.
+  * @param  none
+  * @retval none
+  */
+// void HardFault_Handler(void)
+// {
+//   /* go to infinite loop when hard fault exception occurs */
+//   while(1)
+//   {
+//   }
+// }
+
+/**
+  * @brief  this function handles memory manage exception.
+  * @param  none
+  * @retval none
+  */
+void MemManage_Handler(void)
+{
+  /* go to infinite loop when memory manage exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles bus fault exception.
+  * @param  none
+  * @retval none
+  */
+void BusFault_Handler(void)
+{
+  /* go to infinite loop when bus fault exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles usage fault exception.
+  * @param  none
+  * @retval none
+  */
+void UsageFault_Handler(void)
+{
+  /* go to infinite loop when usage fault exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles svcall exception.
+  * @param  none
+  * @retval none
+  */
+// void SVC_Handler(void)
+// {
+// }
+
+/**
+  * @brief  this function handles debug monitor exception.
+  * @param  none
+  * @retval none
+  */
+void DebugMon_Handler(void)
+{
+}
+
+/**
+  * @brief  this function handles pendsv_handler exception.
+  * @param  none
+  * @retval none
+  */
+// void PendSV_Handler(void)
+// {
+// }
+
+/**
+  * @brief  this function handles systick handler.
+  * @param  none
+  * @retval none
+  */
+// void SysTick_Handler(void)
+// {
+// }
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

managed_components/espressif__tinyusb/hw/bsp/at32f402_405/at32f402_405_int.h

@@ -0,0 +1,55 @@
+/**
+  **************************************************************************
+  * @file     at32f402_405_int.h
+  * @brief    header file of main interrupt service routines.
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F402_405_INT_H
+#define __AT32F402_405_INT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f402_405.h"
+
+/* exported types ------------------------------------------------------------*/
+/* exported constants --------------------------------------------------------*/
+/* exported macro ------------------------------------------------------------*/
+/* exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

managed_components/espressif__tinyusb/hw/bsp/at32f402_405/boards/at_start_f402/board.cmake

@@ -0,0 +1,8 @@
+set(MCU_VARIANT AT32F402RCT7)
+set(MCU_LINKER_NAME AT32F402xC)
+
+set(JLINK_DEVICE ${MCU_VARIANT})
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC ${MCU_VARIANT})
+endfunction()

managed_components/espressif__tinyusb/hw/bsp/at32f402_405/boards/at_start_f402/board.h

@@ -0,0 +1,74 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   name: AT-START-F402
+   url: https://www.arterychip.com/en/product/AT32F402.jsp
+*/
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#define USB_VBUS_IGNORE
+//#define USB_SOF_OUTPUT_ENABLE
+
+// LED
+#define LED_PORT              GPIOF
+#define LED_PIN               GPIO_PINS_4
+#define LED_STATE_ON          0 // Active Low
+#define LED_GPIO_CLK_EN()     crm_periph_clock_enable(CRM_GPIOF_PERIPH_CLOCK, TRUE)
+
+// Button
+#define BUTTON_PORT           GPIOA
+#define BUTTON_PIN            GPIO_PINS_0
+#define BUTTON_STATE_ACTIVE   1
+#define BUTTON_GPIO_CLK_EN()  crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE)
+
+//USART
+#define PRINT_UART                       USART1
+#define PRINT_UART_CRM_CLK               CRM_USART1_PERIPH_CLOCK
+#define PRINT_UART_TX_PIN                GPIO_PINS_9
+#define PRINT_UART_TX_GPIO               GPIOA
+#define PRINT_UART_TX_GPIO_CRM_CLK       CRM_GPIOA_PERIPH_CLOCK
+#define PRINT_UART_TX_PIN_SOURCE         GPIO_PINS_SOURCE9
+#define PRINT_UART_TX_PIN_MUX_NUM        GPIO_MUX_7
+
+//Vbus
+static inline void board_vbus_sense_init(void)
+{
+    *(int*)(0x50000038) |= (1<<21);
+    *(int*)(0x40040038) |= (1<<21);
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */

managed_components/espressif__tinyusb/hw/bsp/at32f402_405/boards/at_start_f402/board.mk

@@ -0,0 +1,7 @@
+MCU_VARIANT = AT32F402RCT7
+MCU_LINKER_NAME = AT32F402xC
+
+JLINK_DEVICE = ${MCU_VARIANT}
+
+CFLAGS += \
+  -D${MCU_VARIANT}

managed_components/espressif__tinyusb/hw/bsp/at32f402_405/boards/at_start_f405/board.cmake

@@ -0,0 +1,17 @@
+set(MCU_VARIANT AT32F405RCT7)
+set(MCU_LINKER_NAME AT32F405xC)
+
+set(JLINK_DEVICE ${MCU_VARIANT})
+
+set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED)
+
+if (NOT DEFINED RHPORT_DEVICE)
+  set(RHPORT_DEVICE 1)
+endif()
+if (NOT DEFINED RHPORT_HOST)
+  set(RHPORT_HOST 0)
+endif()
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC ${MCU_VARIANT})
+endfunction()

managed_components/espressif__tinyusb/hw/bsp/at32f402_405/boards/at_start_f405/board.h

@@ -0,0 +1,74 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   name: AT-START-F405
+   url: https://www.arterychip.com/en/product/AT32F405.jsp
+*/
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#define USB_VBUS_IGNORE
+//#define USB_SOF_OUTPUT_ENABLE
+
+// LED
+#define LED_PORT              GPIOF
+#define LED_PIN               GPIO_PINS_4
+#define LED_STATE_ON          0 // Active Low
+#define LED_GPIO_CLK_EN()     crm_periph_clock_enable(CRM_GPIOF_PERIPH_CLOCK, TRUE)
+
+// Button
+#define BUTTON_PORT           GPIOA
+#define BUTTON_PIN            GPIO_PINS_0
+#define BUTTON_STATE_ACTIVE   1
+#define BUTTON_GPIO_CLK_EN()  crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE)
+
+//USART
+#define PRINT_UART                       USART1
+#define PRINT_UART_CRM_CLK               CRM_USART1_PERIPH_CLOCK
+#define PRINT_UART_TX_PIN                GPIO_PINS_9
+#define PRINT_UART_TX_GPIO               GPIOA
+#define PRINT_UART_TX_GPIO_CRM_CLK       CRM_GPIOA_PERIPH_CLOCK
+#define PRINT_UART_TX_PIN_SOURCE         GPIO_PINS_SOURCE9
+#define PRINT_UART_TX_PIN_MUX_NUM        GPIO_MUX_7
+
+//Vbus
+static inline void board_vbus_sense_init(void)
+{
+    *(int*)(0x50000038) |= (1<<21);
+    *(int*)(0x40040038) |= (1<<21);
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */

managed_components/espressif__tinyusb/hw/bsp/at32f402_405/boards/at_start_f405/board.mk

@@ -0,0 +1,11 @@
+MCU_VARIANT = AT32F405RCT7
+MCU_LINKER_NAME = AT32F405xC
+
+JLINK_DEVICE = ${MCU_VARIANT}
+
+RHPORT_SPEED = OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED
+RHPORT_DEVICE ?= 1
+RHPORT_HOST ?= 0
+
+CFLAGS += \
+  -D${MCU_VARIANT}

managed_components/espressif__tinyusb/hw/bsp/at32f402_405/family.c

@@ -0,0 +1,292 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   manufacturer: Artery
+*/
+
+#include "at32f402_405_clock.h"
+#include "bsp/board_api.h"
+#include "board.h"
+
+void uart_print_init(uint32_t baudrate);
+void usb_clock48m_select(usb_clk48_s clk_s);
+void led_and_botton_init(void);
+void usb_gpio_config(void);
+
+//--------------------------------------------------------------------+
+// Forward USB interrupt events to TinyUSB IRQ Handler
+//--------------------------------------------------------------------+
+void OTGFS1_IRQHandler(void)
+{
+  tusb_int_handler(0, true);
+}
+void OTGHS_IRQHandler(void)
+{
+  tusb_int_handler(1, true);
+}
+void OTGFS1_WKUP_IRQHandler(void)
+{
+  tusb_int_handler(0, true);
+}
+void OTGHS_WKUP_IRQHandler(void)
+{
+  tusb_int_handler(1, true);
+}
+
+void board_init(void)
+{
+  /* config nvic priority group */
+  nvic_priority_group_config(NVIC_PRIORITY_GROUP_4);
+
+  /* config system clock */
+  system_clock_config();
+
+  /* config usb io*/
+  //usb_gpio_config();
+
+  /* enable usb clock */
+  crm_periph_clock_enable(CRM_OTGFS1_PERIPH_CLOCK, TRUE);
+  crm_periph_clock_enable(CRM_OTGHS_PERIPH_CLOCK, TRUE);
+
+  /* select usb 48m clcok source */
+  usb_clock48m_select(USB_CLK_HEXT);
+
+  /* vbus ignore */
+  board_vbus_sense_init();
+
+  /* configure systick */
+  SysTick_Config(system_core_clock / 1000);
+
+  #if CFG_TUSB_OS == OPT_OS_FREERTOS
+    // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
+    NVIC_SetPriority(OTGHS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+    NVIC_SetPriority(OTGFS1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+  #else
+    NVIC_SetPriority(OTGHS_IRQn, 0);
+    NVIC_SetPriority(OTGFS1_IRQn, 0);
+  #endif
+
+  /* config led and key */
+  led_and_botton_init();
+
+  /* config usart to printf */
+  uart_print_init(115200);
+  // printf("usart printf config success!\r\n");
+}
+
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+void led_and_botton_init(void)
+{
+  /* LED */
+  gpio_init_type gpio_led_init_struct;
+  /* enable the led clock */
+  LED_GPIO_CLK_EN();
+  /* set default parameter */
+  gpio_default_para_init(&gpio_led_init_struct);
+  /* configure the led gpio */
+  gpio_led_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_led_init_struct.gpio_out_type  = GPIO_OUTPUT_PUSH_PULL;
+  gpio_led_init_struct.gpio_mode = GPIO_MODE_OUTPUT;
+  gpio_led_init_struct.gpio_pins = LED_PIN | GPIO_PINS_5 | GPIO_PINS_6;
+  gpio_led_init_struct.gpio_pull = GPIO_PULL_NONE;
+  gpio_init(LED_PORT, &gpio_led_init_struct);
+  gpio_bits_set(LED_PORT, GPIO_PINS_5);
+  gpio_bits_set(LED_PORT, GPIO_PINS_6);
+  /* Button */
+  gpio_init_type gpio_button_init_struct;
+  /* enable the button clock */
+  BUTTON_GPIO_CLK_EN();
+  /* set default parameter */
+  gpio_default_para_init(&gpio_button_init_struct);
+  /* configure the button gpio */
+  gpio_button_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_button_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_button_init_struct.gpio_mode = GPIO_MODE_INPUT;
+  gpio_button_init_struct.gpio_pins = BUTTON_PIN;
+  gpio_button_init_struct.gpio_pull = GPIO_PULL_DOWN;
+  gpio_init(BUTTON_PORT, &gpio_button_init_struct);
+}
+
+/**
+  * @brief  usb 48M clock select
+  * @param  clk_s:USB_CLK_HICK, USB_CLK_HEXT
+  * @retval none
+  */
+void usb_clock48m_select(usb_clk48_s clk_s)
+{
+  if(clk_s == USB_CLK_HICK)
+  {
+    crm_usb_clock_source_select(CRM_USB_CLOCK_SOURCE_HICK);
+    /* enable the acc calibration ready interrupt */
+    crm_periph_clock_enable(CRM_ACC_PERIPH_CLOCK, TRUE);
+    /* update the c1\c2\c3 value */
+    acc_write_c1(7980);
+    acc_write_c2(8000);
+    acc_write_c3(8020);
+    /* open acc calibration */
+    acc_calibration_mode_enable(ACC_CAL_HICKTRIM, TRUE);
+  }
+  else
+  {
+    crm_pllu_output_set(TRUE);
+    /* wait till pll is ready */
+    while(crm_flag_get(CRM_PLLU_STABLE_FLAG) != SET){}
+    crm_usb_clock_source_select(CRM_USB_CLOCK_SOURCE_PLLU);
+  }
+}
+
+void usb_gpio_config(void)
+{
+  /* When the USB clock is enabled, the hardware will automatically
+  configure the pins; but other special pins that need to be used,
+  such as the pins used to detect VBUS or the pins that output the
+  SOF signal, still need to be configured separately, and these pins
+  are usually not required */
+}
+
+/**
+  * @brief  initialize uart
+  * @param  baudrate: uart baudrate
+  * @retval none
+  */
+void uart_print_init(uint32_t baudrate)
+{
+  gpio_init_type gpio_init_struct;
+  /* enable the uart and gpio clock */
+  crm_periph_clock_enable(PRINT_UART_CRM_CLK, TRUE);
+  crm_periph_clock_enable(PRINT_UART_TX_GPIO_CRM_CLK, TRUE);
+  gpio_default_para_init(&gpio_init_struct);
+  /* configure the uart tx pin */
+  gpio_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_init_struct.gpio_out_type  = GPIO_OUTPUT_PUSH_PULL;
+  gpio_init_struct.gpio_mode = GPIO_MODE_MUX;
+  gpio_init_struct.gpio_pins = PRINT_UART_TX_PIN;
+  gpio_init_struct.gpio_pull = GPIO_PULL_NONE;
+  gpio_init(PRINT_UART_TX_GPIO, &gpio_init_struct);
+  gpio_pin_mux_config(PRINT_UART_TX_GPIO, PRINT_UART_TX_PIN_SOURCE, PRINT_UART_TX_PIN_MUX_NUM);
+  /* configure uart param */
+  usart_init(PRINT_UART, baudrate, USART_DATA_8BITS, USART_STOP_1_BIT);
+  usart_transmitter_enable(PRINT_UART, TRUE);
+  usart_enable(PRINT_UART, TRUE);
+}
+
+// Get characters from UART. Return number of read bytes
+int board_uart_read(uint8_t *buf, int len) {
+  (void) buf;
+  (void) len;
+  return 0;
+}
+
+// Send characters to UART. Return number of sent bytes
+int board_uart_write(void const *buf, int len)
+{
+  #if CFG_TUSB_OS == OPT_OS_NONE
+    int txsize = len;
+    u16 timeout = 0xffff;
+    while (txsize--)
+    {
+      while(usart_flag_get(PRINT_UART, USART_TDBE_FLAG) == RESET)
+      {
+        timeout--;
+        if(timeout == 0)
+        {
+          return 0;
+        }
+      }
+      PRINT_UART->dt = (*((uint8_t const *)buf) & 0x01FF);
+      buf++;
+    }
+    return len;
+  #else
+    (void) buf;
+    (void) len;
+    return 0;
+  #endif
+}
+
+void board_led_write(bool state)
+{
+  gpio_bits_write(LED_PORT, LED_PIN, state ^ (!LED_STATE_ON));
+}
+
+uint32_t board_button_read(void)
+{
+  return gpio_input_data_bit_read(BUTTON_PORT, BUTTON_PIN);
+}
+
+size_t board_get_unique_id(uint8_t id[], size_t max_len)
+{
+  (void) max_len;
+  volatile uint32_t * at32_uuid = ((volatile uint32_t*)0x1FFFF7E8);
+  uint32_t* id32 = (uint32_t*) (uintptr_t) id;
+  uint8_t const len = 12;
+
+  id32[0] = at32_uuid[0];
+  id32[1] = at32_uuid[1];
+  id32[2] = at32_uuid[2];
+
+  return len;
+}
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+  volatile uint32_t system_ticks = 0;
+  void SysTick_Handler(void)
+  {
+    system_ticks++;
+  }
+  uint32_t board_millis(void)
+  {
+    return system_ticks;
+  }
+  void SVC_Handler(void)
+  {
+  }
+  void PendSV_Handler(void)
+  {
+  }
+#endif
+
+void HardFault_Handler(void) {
+  __asm("BKPT #0\n");
+}
+
+// Required by __libc_init_array in startup code if we are compiling using
+// -nostdlib/-nostartfiles.
+void _init(void) {
+}
+
+#ifdef  USE_FULL_ASSERT
+void assert_failed(const char *file, uint32_t line)
+{
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */

managed_components/espressif__tinyusb/hw/bsp/at32f402_405/family.cmake

@@ -0,0 +1,133 @@
+include_guard()
+
+set(AT32_FAMILY at32f402_405)
+set(AT32_SDK_LIB ${TOP}/hw/mcu/artery/${AT32_FAMILY}/libraries)
+
+string(TOUPPER ${AT32_FAMILY} AT32_FAMILY_UPPER)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS ${AT32_FAMILY_UPPER} CACHE INTERNAL "")
+
+if (NOT DEFINED RHPORT_DEVICE)
+  set(RHPORT_DEVICE 0)
+endif ()
+if (NOT DEFINED RHPORT_HOST)
+  set(RHPORT_HOST 0)
+endif ()
+
+if (NOT DEFINED RHPORT_SPEED)
+  set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_FULL_SPEED)
+endif ()
+if (NOT DEFINED RHPORT_DEVICE_SPEED)
+  list(GET RHPORT_SPEED ${RHPORT_DEVICE} RHPORT_DEVICE_SPEED)
+endif ()
+if (NOT DEFINED RHPORT_HOST_SPEED)
+  list(GET RHPORT_SPEED ${RHPORT_HOST} RHPORT_HOST_SPEED)
+endif ()
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (TARGET ${BOARD_TARGET})
+    return()
+  endif ()
+
+  # Startup & Linker script
+  set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s)
+  set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU})
+  set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s)
+
+  if (NOT DEFINED LD_FILE_GNU)
+    set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld)
+  endif ()
+  set(LD_FILE_Clang ${LD_FILE_GNU})
+  set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf)
+
+  add_library(${BOARD_TARGET} STATIC
+    ${AT32_SDK_LIB}/cmsis/cm4/device_support/system_${AT32_FAMILY}.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_gpio.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_misc.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_usart.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_acc.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_crm.c
+    ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+    )
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${AT32_SDK_LIB}/cmsis/cm4/core_support
+    ${AT32_SDK_LIB}/cmsis/cm4/device_support
+    ${AT32_SDK_LIB}/drivers/inc
+    )
+  target_compile_definitions(${BOARD_TARGET} PUBLIC
+    BOARD_TUD_RHPORT=${RHPORT_DEVICE}
+    BOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED}
+    BOARD_TUH_RHPORT=${RHPORT_HOST}
+    BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED}
+    )
+
+  update_board(${BOARD_TARGET})
+
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_GNU}"
+      -nostartfiles
+      --specs=nosys.specs --specs=nano.specs
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_Clang}"
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--config=${LD_FILE_IAR}"
+      )
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER})
+  target_sources(${TARGET} PUBLIC
+    ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c
+    ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c
+    ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c
+    )
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD})
+
+  # Flashing
+  family_add_bin_hex(${TARGET})
+  family_flash_jlink(${TARGET})
+endfunction()

managed_components/espressif__tinyusb/hw/bsp/at32f402_405/family.mk

@@ -0,0 +1,67 @@
+AT32_FAMILY = at32f402_405
+AT32_SDK_LIB = hw/mcu/artery/${AT32_FAMILY}/libraries
+
+include $(TOP)/$(BOARD_PATH)/board.mk
+
+CPU_CORE ?= cortex-m4
+
+CFLAGS_GCC += \
+  -flto
+
+RHPORT_SPEED ?= OPT_MODE_FULL_SPEED OPT_MODE_FULL_SPEED
+RHPORT_DEVICE ?= 0
+RHPORT_HOST ?= 0
+
+ifndef RHPORT_DEVICE_SPEED
+ifeq ($(RHPORT_DEVICE), 0)
+  RHPORT_DEVICE_SPEED = $(firstword $(RHPORT_SPEED))
+else
+  RHPORT_DEVICE_SPEED = $(lastword $(RHPORT_SPEED))
+endif
+endif
+
+ifndef RHPORT_HOST_SPEED
+ifeq ($(RHPORT_HOST), 0)
+  RHPORT_HOST_SPEED = $(firstword $(RHPORT_SPEED))
+else
+  RHPORT_HOST_SPEED = $(lastword $(RHPORT_SPEED))
+endif
+endif
+
+CFLAGS += \
+    -DCFG_TUSB_MCU=OPT_MCU_AT32F402_405 \
+	-DBOARD_TUD_RHPORT=${RHPORT_DEVICE} \
+	-DBOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} \
+	-DBOARD_TUH_RHPORT=${RHPORT_HOST} \
+	-DBOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} \
+
+LDFLAGS_GCC += \
+	-flto --specs=nosys.specs -nostdlib -nostartfiles
+
+SRC_C += \
+	src/portable/synopsys/dwc2/dcd_dwc2.c \
+	src/portable/synopsys/dwc2/hcd_dwc2.c \
+	src/portable/synopsys/dwc2/dwc2_common.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_gpio.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_misc.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_usart.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_crm.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_acc.c \
+	$(AT32_SDK_LIB)/cmsis/cm4/device_support/system_${AT32_FAMILY}.c
+
+INC += \
+	$(TOP)/$(BOARD_PATH) \
+	$(TOP)/$(AT32_SDK_LIB)/drivers/inc \
+	$(TOP)/$(AT32_SDK_LIB)/cmsis/cm4/core_support \
+	$(TOP)/$(AT32_SDK_LIB)/cmsis/cm4/device_support
+
+SRC_S_GCC += ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s
+SRC_S_IAR += ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s
+
+LD_FILE_GCC ?= ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld
+LD_FILE_IAR ?= ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf
+
+# For freeRTOS port source
+FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F
+
+flash: flash-atlink

managed_components/espressif__tinyusb/hw/bsp/at32f403a_407/FreeRTOSConfig/FreeRTOSConfig.h

@@ -0,0 +1,177 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+// Include MCU header
+  #include "at32f403a_407.h"
+
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU								        0
+#define configENABLE_FPU								        1
+#define configENABLE_TRUSTZONE					        0
+#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               4
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         1
+#define configSUPPORT_DYNAMIC_ALLOCATION        0
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+#define configCHECK_HANDLER_INSTALLATION       0
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+#ifdef __RX__
+/* Renesas RX series */
+#define vSoftwareInterruptISR					        INT_Excep_ICU_SWINT
+#define vTickISR								              INT_Excep_CMT0_CMI0
+#define configPERIPHERAL_CLOCK_HZ				      (configCPU_CLOCK_HZ/2)
+#define configKERNEL_INTERRUPT_PRIORITY			  1
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY	4
+
+#else
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+#if defined(__NVIC_PRIO_BITS)
+  // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h
+	#define configPRIO_BITS       __NVIC_PRIO_BITS
+
+#elif defined(__ECLIC_INTCTLBITS)
+  // RISC-V Bumblebee core from nuclei
+  #define configPRIO_BITS       __ECLIC_INTCTLBITS
+
+#elif defined(__IASMARM__)
+  // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS.
+  // Therefore we will hard coded it to minimum value of 2 to get pass ci build.
+  // IAR user must update this to correct value of the target MCU
+  #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU"
+  #define configPRIO_BITS       2
+
+#else
+  #error "FreeRTOS configPRIO_BITS to be defined"
+#endif
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
+
+#endif /* __FREERTOS_CONFIG__H */

managed_components/espressif__tinyusb/hw/bsp/at32f403a_407/at32f403a_407_clock.c

@@ -0,0 +1,87 @@
+/**
+  **************************************************************************
+  * @file     at32f403a_407_clock.c
+  * @brief    system clock config program
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f403a_407_clock.h"
+
+/**
+  * @brief  system clock config program
+  * @note   the system clock is configured as follow:
+  *         - system clock        = hick8m / 2 * pll_mult
+  *         - system clock source = pll (hick)
+  *         - hick                = 8000000 / 2
+  *         - sclk                = 240000000
+  *         - ahbdiv              = 1
+  *         - ahbclk              = 240000000
+  *         - apb2div             = 2
+  *         - apb2clk             = 120000000
+  *         - apb1div             = 2
+  *         - apb1clk             = 120000000
+  *         - pll_mult            = 60
+  *         - pll_range           = GT72MHZ (greater than 72 mhz)
+  * @param  none
+  * @retval none
+  */
+void system_clock_config(void)
+{
+  /* reset crm */
+  crm_reset();
+
+  /* config pll clock resource */
+  crm_pll_config(CRM_PLL_SOURCE_HICK, CRM_PLL_MULT_60, CRM_PLL_OUTPUT_RANGE_GT72MHZ);
+
+  /* enable pll */
+  crm_clock_source_enable(CRM_CLOCK_SOURCE_PLL, TRUE);
+
+  /* wait till pll is ready */
+  while(crm_flag_get(CRM_PLL_STABLE_FLAG) != SET)
+  {
+  }
+
+  /* config ahbclk */
+  crm_ahb_div_set(CRM_AHB_DIV_1);
+
+  /* config apb2clk, the maximum frequency of APB1/APB2 clock is 120 MHz */
+  crm_apb2_div_set(CRM_APB2_DIV_2);
+
+  /* config apb1clk, the maximum frequency of APB1/APB2 clock is 120 MHz  */
+  crm_apb1_div_set(CRM_APB1_DIV_2);
+
+  /* enable auto step mode */
+  crm_auto_step_mode_enable(TRUE);
+
+  /* select pll as system clock source */
+  crm_sysclk_switch(CRM_SCLK_PLL);
+
+  /* wait till pll is used as system clock source */
+  while(crm_sysclk_switch_status_get() != CRM_SCLK_PLL)
+  {
+  }
+
+  /* disable auto step mode */
+  crm_auto_step_mode_enable(FALSE);
+
+  /* update system_core_clock global variable */
+  system_core_clock_update();
+}

managed_components/espressif__tinyusb/hw/bsp/at32f403a_407/at32f403a_407_clock.h

@@ -0,0 +1,43 @@
+/**
+  **************************************************************************
+  * @file     at32f403a_407_clock.h
+  * @brief    header file of clock program
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F403A_407_CLOCK_H
+#define __AT32F403A_407_CLOCK_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f403a_407.h"
+
+/* exported functions ------------------------------------------------------- */
+void system_clock_config(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __AT32F403A_407_CLOCK_H */

managed_components/espressif__tinyusb/hw/bsp/at32f403a_407/at32f403a_407_conf.h

@@ -0,0 +1,161 @@
+/**
+  **************************************************************************
+  * @file     at32f403a_407_conf.h
+  * @brief    at32f403a_407 config header file
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F403A_407_CONF_H
+#define __AT32F403A_407_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/**
+  * @brief in the following line adjust the value of high speed external crystal (hext)
+  * used in your application
+  *
+  * tip: to avoid modifying this file each time you need to use different hext, you
+  *      can define the hext value in your toolchain compiler preprocessor.
+  *
+  */
+#if !defined  HEXT_VALUE
+#define HEXT_VALUE               ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
+#endif
+
+/**
+  * @brief in the following line adjust the high speed external crystal (hext) startup
+  * timeout value
+  */
+#define HEXT_STARTUP_TIMEOUT     ((uint16_t)0x3000) /*!< time out for hext start up */
+#define HICK_VALUE               ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+
+/* module define -------------------------------------------------------------*/
+#define CRM_MODULE_ENABLED
+#define TMR_MODULE_ENABLED
+#define RTC_MODULE_ENABLED
+#define BPR_MODULE_ENABLED
+#define GPIO_MODULE_ENABLED
+#define I2C_MODULE_ENABLED
+#define USART_MODULE_ENABLED
+#define PWC_MODULE_ENABLED
+#define CAN_MODULE_ENABLED
+#define ADC_MODULE_ENABLED
+#define DAC_MODULE_ENABLED
+#define SPI_MODULE_ENABLED
+#define DMA_MODULE_ENABLED
+#define DEBUG_MODULE_ENABLED
+#define FLASH_MODULE_ENABLED
+#define CRC_MODULE_ENABLED
+#define WWDT_MODULE_ENABLED
+#define WDT_MODULE_ENABLED
+#define EXINT_MODULE_ENABLED
+#define SDIO_MODULE_ENABLED
+#define XMC_MODULE_ENABLED
+#define USB_MODULE_ENABLED
+#define ACC_MODULE_ENABLED
+#define MISC_MODULE_ENABLED
+#define EMAC_MODULE_ENABLED
+
+/* includes ------------------------------------------------------------------*/
+#ifdef CRM_MODULE_ENABLED
+#include "at32f403a_407_crm.h"
+#endif
+#ifdef TMR_MODULE_ENABLED
+#include "at32f403a_407_tmr.h"
+#endif
+#ifdef RTC_MODULE_ENABLED
+#include "at32f403a_407_rtc.h"
+#endif
+#ifdef BPR_MODULE_ENABLED
+#include "at32f403a_407_bpr.h"
+#endif
+#ifdef GPIO_MODULE_ENABLED
+#include "at32f403a_407_gpio.h"
+#endif
+#ifdef I2C_MODULE_ENABLED
+#include "at32f403a_407_i2c.h"
+#endif
+#ifdef USART_MODULE_ENABLED
+#include "at32f403a_407_usart.h"
+#endif
+#ifdef PWC_MODULE_ENABLED
+#include "at32f403a_407_pwc.h"
+#endif
+#ifdef CAN_MODULE_ENABLED
+#include "at32f403a_407_can.h"
+#endif
+#ifdef ADC_MODULE_ENABLED
+#include "at32f403a_407_adc.h"
+#endif
+#ifdef DAC_MODULE_ENABLED
+#include "at32f403a_407_dac.h"
+#endif
+#ifdef SPI_MODULE_ENABLED
+#include "at32f403a_407_spi.h"
+#endif
+#ifdef DMA_MODULE_ENABLED
+#include "at32f403a_407_dma.h"
+#endif
+#ifdef DEBUG_MODULE_ENABLED
+#include "at32f403a_407_debug.h"
+#endif
+#ifdef FLASH_MODULE_ENABLED
+#include "at32f403a_407_flash.h"
+#endif
+#ifdef CRC_MODULE_ENABLED
+#include "at32f403a_407_crc.h"
+#endif
+#ifdef WWDT_MODULE_ENABLED
+#include "at32f403a_407_wwdt.h"
+#endif
+#ifdef WDT_MODULE_ENABLED
+#include "at32f403a_407_wdt.h"
+#endif
+#ifdef EXINT_MODULE_ENABLED
+#include "at32f403a_407_exint.h"
+#endif
+#ifdef SDIO_MODULE_ENABLED
+#include "at32f403a_407_sdio.h"
+#endif
+#ifdef XMC_MODULE_ENABLED
+#include "at32f403a_407_xmc.h"
+#endif
+#ifdef ACC_MODULE_ENABLED
+#include "at32f403a_407_acc.h"
+#endif
+#ifdef MISC_MODULE_ENABLED
+#include "at32f403a_407_misc.h"
+#endif
+#ifdef USB_MODULE_ENABLED
+#include "at32f403a_407_usb.h"
+#endif
+#ifdef EMAC_MODULE_ENABLED
+#include "at32f403a_407_emac.h"
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

managed_components/espressif__tinyusb/hw/bsp/at32f403a_407/at32f403a_407_int.c

@@ -0,0 +1,117 @@
+/**
+  **************************************************************************
+  * @file     at32f403a_407_int.c
+  * @brief    main interrupt service routines.
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f403a_407_int.h"
+
+/** @addtogroup UTILITIES_examples
+  * @{
+  */
+
+/** @addtogroup USB_IAP_bootloader
+  * @{
+  */
+
+/**
+  * @brief  this function handles nmi exception.
+  * @param  none
+  * @retval none
+  */
+void NMI_Handler(void)
+{
+}
+
+/**
+  * @brief  this function handles memory manage exception.
+  * @param  none
+  * @retval none
+  */
+void MemManage_Handler(void)
+{
+  /* go to infinite loop when memory manage exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles bus fault exception.
+  * @param  none
+  * @retval none
+  */
+void BusFault_Handler(void)
+{
+  /* go to infinite loop when bus fault exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles usage fault exception.
+  * @param  none
+  * @retval none
+  */
+void UsageFault_Handler(void)
+{
+  /* go to infinite loop when usage fault exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles svcall exception.
+  * @param  none
+  * @retval none
+  */
+//void SVC_Handler(void)
+//{
+//}
+
+/**
+  * @brief  this function handles debug monitor exception.
+  * @param  none
+  * @retval none
+  */
+void DebugMon_Handler(void)
+{
+}
+
+/**
+  * @brief  this function handles pendsv_handler exception.
+  * @param  none
+  * @retval none
+  */
+//void PendSV_Handler(void)
+//{
+//}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

managed_components/espressif__tinyusb/hw/bsp/at32f403a_407/at32f403a_407_int.h

@@ -0,0 +1,55 @@
+/**
+  **************************************************************************
+  * @file     at32f403a_407_int.h
+  * @brief    header file of main interrupt service routines.
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F403A_407_INT_H
+#define __AT32F403A_407_INT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f403a_407.h"
+
+/* exported types ------------------------------------------------------------*/
+/* exported constants --------------------------------------------------------*/
+/* exported macro ------------------------------------------------------------*/
+/* exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

managed_components/espressif__tinyusb/hw/bsp/at32f403a_407/boards/at32f403a_weact_blackpill/board.cmake

@@ -0,0 +1,8 @@
+set(MCU_VARIANT AT32F403ACGU7)
+set(MCU_LINKER_NAME AT32F403AxG)
+
+set(JLINK_DEVICE ${MCU_VARIANT})
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC ${MCU_VARIANT})
+endfunction()

managed_components/espressif__tinyusb/hw/bsp/at32f403a_407/boards/at32f403a_weact_blackpill/board.h

@@ -0,0 +1,67 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   name: WeAct BlackPill AT32F403ACGU7
+   url: https://github.com/WeActStudio/WeActStudio.BlackPill
+*/
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// LED
+#define LED_PORT              GPIOC
+#define LED_PIN               GPIO_PINS_13
+#define LED_STATE_ON          0 // Active Low
+#define LED_GPIO_CLK_EN()     crm_periph_clock_enable(CRM_GPIOC_PERIPH_CLOCK, TRUE)
+
+// Button
+#define BUTTON_PORT           GPIOA
+#define BUTTON_PIN            GPIO_PINS_0
+#define BUTTON_PULL           GPIO_PULL_UP
+#define BUTTON_STATE_ACTIVE   0
+#define BUTTON_GPIO_CLK_EN()  crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE)
+
+// UART
+#define PRINT_UART                       USART1
+#define PRINT_UART_CRM_CLK               CRM_USART1_PERIPH_CLOCK
+#define PRINT_UART_TX_PIN                GPIO_PINS_9
+#define PRINT_UART_TX_GPIO               GPIOA
+#define PRINT_UART_TX_GPIO_CRM_CLK       CRM_GPIOA_PERIPH_CLOCK
+
+static inline void board_vbus_sense_init(void)
+{
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */

managed_components/espressif__tinyusb/hw/bsp/at32f403a_407/boards/at32f403a_weact_blackpill/board.mk

@@ -0,0 +1,7 @@
+MCU_VARIANT = AT32F403ACGU7
+MCU_LINKER_NAME = AT32F403AxG
+
+JLINK_DEVICE = ${MCU_VARIANT}
+
+CFLAGS += \
+  -D${MCU_VARIANT}

managed_components/espressif__tinyusb/hw/bsp/at32f403a_407/boards/at_start_f403a/board.cmake

@@ -0,0 +1,8 @@
+set(MCU_VARIANT AT32F403AVGT7)
+set(MCU_LINKER_NAME AT32F403AxG)
+
+set(JLINK_DEVICE ${MCU_VARIANT})
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC ${MCU_VARIANT})
+endfunction()

managed_components/espressif__tinyusb/hw/bsp/at32f403a_407/boards/at_start_f403a/board.h

@@ -0,0 +1,72 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   name: AT-START-F403a
+   url: https://www.arterychip.com/en/product/AT32F403.jsp
+*/
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// LED
+#define LED_PORT              GPIOD
+#define LED_PIN               GPIO_PINS_13
+#define LED_STATE_ON          0 // Active Low
+#define LED_GPIO_CLK_EN()     crm_periph_clock_enable(CRM_GPIOD_PERIPH_CLOCK, TRUE)
+
+// #define LED_PORT              GPIOA
+// #define LED_PIN               GPIO_PINS_1
+// #define LED_STATE_ON          0 // Active Low
+// #define LED_GPIO_CLK_EN()     crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE)
+
+// Button
+#define BUTTON_PORT           GPIOA
+#define BUTTON_PIN            GPIO_PINS_0
+#define BUTTON_PULL           GPIO_PULL_DOWN
+#define BUTTON_STATE_ACTIVE   1
+#define BUTTON_GPIO_CLK_EN()  crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE)
+
+// UART
+#define PRINT_UART                       USART1
+#define PRINT_UART_CRM_CLK               CRM_USART1_PERIPH_CLOCK
+#define PRINT_UART_TX_PIN                GPIO_PINS_9
+#define PRINT_UART_TX_GPIO               GPIOA
+#define PRINT_UART_TX_GPIO_CRM_CLK       CRM_GPIOA_PERIPH_CLOCK
+
+static inline void board_vbus_sense_init(void)
+{
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */

managed_components/espressif__tinyusb/hw/bsp/at32f403a_407/boards/at_start_f403a/board.mk

@@ -0,0 +1,7 @@
+MCU_VARIANT = AT32F403AVGT7
+MCU_LINKER_NAME = AT32F403AxG
+
+JLINK_DEVICE = ${MCU_VARIANT}
+
+CFLAGS += \
+  -D${MCU_VARIANT}

managed_components/espressif__tinyusb/hw/bsp/at32f403a_407/boards/at_start_f407/board.cmake

@@ -0,0 +1,8 @@
+set(MCU_VARIANT AT32F407VGT7)
+set(MCU_LINKER_NAME AT32F407xG)
+
+set(JLINK_DEVICE ${MCU_VARIANT})
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC ${MCU_VARIANT})
+endfunction()

managed_components/espressif__tinyusb/hw/bsp/at32f403a_407/boards/at_start_f407/board.h

@@ -0,0 +1,71 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   name: AT-START-F407
+   url: https://www.arterychip.com/en/product/AT32F407.jsp
+*/
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// LED
+#define LED_PORT              GPIOD
+#define LED_PIN               GPIO_PINS_13
+#define LED_STATE_ON          0 // Active Low
+#define LED_GPIO_CLK_EN()     crm_periph_clock_enable(CRM_GPIOD_PERIPH_CLOCK, TRUE)
+
+// #define LED_PORT              GPIOA
+// #define LED_PIN               GPIO_PINS_1
+// #define LED_STATE_ON          0 // Active Low
+// #define LED_GPIO_CLK_EN()     crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE)
+
+// Button
+#define BUTTON_PORT           GPIOA
+#define BUTTON_PIN            GPIO_PINS_0
+#define BUTTON_STATE_ACTIVE   1
+#define BUTTON_GPIO_CLK_EN()  crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE)
+
+// UART
+#define PRINT_UART                       USART1
+#define PRINT_UART_CRM_CLK               CRM_USART1_PERIPH_CLOCK
+#define PRINT_UART_TX_PIN                GPIO_PINS_9
+#define PRINT_UART_TX_GPIO               GPIOA
+#define PRINT_UART_TX_GPIO_CRM_CLK       CRM_GPIOA_PERIPH_CLOCK
+
+static inline void board_vbus_sense_init(void)
+{
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */

managed_components/espressif__tinyusb/hw/bsp/at32f403a_407/boards/at_start_f407/board.mk

@@ -0,0 +1,7 @@
+MCU_VARIANT = AT32F407VGT7
+MCU_LINKER_NAME = AT32F407xG
+
+JLINK_DEVICE = ${MCU_VARIANT}
+
+CFLAGS += \
+  -D${MCU_VARIANT}

managed_components/espressif__tinyusb/hw/bsp/at32f403a_407/family.c

@@ -0,0 +1,279 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   manufacturer: Artery
+*/
+
+#include "at32f403a_407_clock.h"
+#include "bsp/board_api.h"
+#include "board.h"
+
+void usb_clock48m_select(usb_clk48_s clk_s);
+void uart_print_init(uint32_t baudrate);
+
+//--------------------------------------------------------------------+
+// Forward USB interrupt events to TinyUSB IRQ Handler
+//--------------------------------------------------------------------+
+void USBFS_H_CAN1_TX_IRQHandler(void) {
+  tud_int_handler(0);
+}
+void USBFS_L_CAN1_RX0_IRQHandler(void) {
+  tud_int_handler(0);
+}
+void USBFS_MAPH_IRQHandler(void) {
+  tud_int_handler(0);
+}
+void USBFS_MAPL_IRQHandler(void) {
+  tud_int_handler(0);
+}
+void USBFSWakeUp_IRQHandler(void) {
+  tud_int_handler(0);
+}
+
+void board_init(void) {
+  system_clock_config();
+
+  /* config nvic priority group */
+  nvic_priority_group_config(NVIC_PRIORITY_GROUP_4);
+
+  /* select usb 48m clcok source */
+  usb_clock48m_select(USB_CLK_HICK);
+
+  /* configure systick */
+  systick_clock_source_config(SYSTICK_CLOCK_SOURCE_AHBCLK_NODIV);
+
+  /* enable usb clock */
+  crm_periph_clock_enable(CRM_USB_PERIPH_CLOCK, TRUE);
+
+  SysTick_Config(SystemCoreClock / 1000);
+#if CFG_TUSB_OS == OPT_OS_FREERTOS
+  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
+  NVIC_SetPriority(USBFS_H_CAN1_TX_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+  NVIC_SetPriority(USBFS_L_CAN1_RX0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+  NVIC_SetPriority(USBFSWakeUp_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+#endif
+
+  /* LED */
+  gpio_init_type gpio_led_init_struct;
+  /* enable the led clock */
+  LED_GPIO_CLK_EN();
+  /* set default parameter */
+  gpio_default_para_init(&gpio_led_init_struct);
+  /* configure the led gpio */
+  gpio_led_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_led_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_led_init_struct.gpio_mode = GPIO_MODE_OUTPUT;
+  gpio_led_init_struct.gpio_pins = LED_PIN;
+  gpio_led_init_struct.gpio_pull = GPIO_PULL_NONE;
+  gpio_init(LED_PORT, &gpio_led_init_struct);
+
+  /* Button */
+  gpio_init_type gpio_button_init_struct;
+  /* enable the button clock */
+  BUTTON_GPIO_CLK_EN();
+  /* set default parameter */
+  gpio_default_para_init(&gpio_button_init_struct);
+  /* configure the button gpio */
+  gpio_button_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_button_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_button_init_struct.gpio_mode = GPIO_MODE_INPUT;
+  gpio_button_init_struct.gpio_pins = BUTTON_PIN;
+  gpio_button_init_struct.gpio_pull = GPIO_PULL_DOWN;
+  gpio_init(BUTTON_PORT, &gpio_button_init_struct);
+
+  uart_print_init(115200);
+  printf("usart printf config success!\r\n");
+}
+
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+/**
+  * @brief  usb 48M clock select
+  * @param  clk_s:USB_CLK_HICK, USB_CLK_HEXT
+  * @retval none
+  */
+void usb_clock48m_select(usb_clk48_s clk_s) {
+  if (clk_s == USB_CLK_HICK) {
+    crm_usb_clock_source_select(CRM_USB_CLOCK_SOURCE_HICK);
+
+    /* enable the acc calibration ready interrupt */
+    crm_periph_clock_enable(CRM_ACC_PERIPH_CLOCK, TRUE);
+
+    /* update the c1\c2\c3 value */
+    acc_write_c1(7980);
+    acc_write_c2(8000);
+    acc_write_c3(8020);
+
+    /* open acc calibration */
+    acc_calibration_mode_enable(ACC_CAL_HICKTRIM, TRUE);
+  } else {
+    switch (system_core_clock) {
+      /* 48MHz */
+      case 48000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_1);
+        break;
+
+      /* 72MHz */
+      case 72000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_1_5);
+        break;
+
+      /* 96MHz */
+      case 96000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_2);
+        break;
+
+      /* 120MHz */
+      case 120000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_2_5);
+        break;
+
+      /* 144MHz */
+      case 144000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_3);
+        break;
+
+      /* 168MHz */
+      case 168000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_3_5);
+        break;
+
+      /* 192MHz */
+      case 192000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_4);
+        break;
+
+      default:
+        break;
+    }
+  }
+}
+
+void uart_print_init(uint32_t baudrate) {
+  gpio_init_type gpio_init_struct;
+  /* enable the uart and gpio clock */
+  crm_periph_clock_enable(PRINT_UART_CRM_CLK, TRUE);
+  crm_periph_clock_enable(PRINT_UART_TX_GPIO_CRM_CLK, TRUE);
+  gpio_default_para_init(&gpio_init_struct);
+  /* configure the uart tx pin */
+  gpio_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_init_struct.gpio_mode = GPIO_MODE_MUX;
+  gpio_init_struct.gpio_pins = PRINT_UART_TX_PIN;
+  gpio_init_struct.gpio_pull = GPIO_PULL_NONE;
+  gpio_init(PRINT_UART_TX_GPIO, &gpio_init_struct);
+  /* configure uart param */
+  usart_init(PRINT_UART, baudrate, USART_DATA_8BITS, USART_STOP_1_BIT);
+  usart_transmitter_enable(PRINT_UART, TRUE);
+  usart_enable(PRINT_UART, TRUE);
+}
+
+void board_led_write(bool state) {
+  gpio_bits_write(LED_PORT, LED_PIN, state ^ (!LED_STATE_ON));
+}
+
+uint32_t board_button_read(void) {
+  return gpio_input_data_bit_read(BUTTON_PORT, BUTTON_PIN) == BUTTON_STATE_ACTIVE;
+}
+
+size_t board_get_unique_id(uint8_t id[], size_t max_len) {
+  (void) max_len;
+  volatile uint32_t *at32_uuid = ((volatile uint32_t *) 0x1FFFF7E8);
+  uint32_t *id32 = (uint32_t *) (uintptr_t) id;
+  uint8_t const len = 12;
+
+  id32[0] = at32_uuid[0];
+  id32[1] = at32_uuid[1];
+  id32[2] = at32_uuid[2];
+
+  return len;
+}
+
+int board_uart_read(uint8_t *buf, int len) {
+  (void) buf;
+  (void) len;
+  return 0;
+}
+
+int board_uart_write(void const *buf, int len) {
+#if CFG_TUSB_OS == OPT_OS_NONE
+  int txsize = len;
+  u16 timeout = 0xffff;
+  while (txsize--) {
+    while (usart_flag_get(PRINT_UART, USART_TDBE_FLAG) == RESET) {
+      timeout--;
+      if (timeout == 0) {
+        return 0;
+      }
+    }
+    PRINT_UART->dt = (*((uint8_t const *) buf) & 0x01FF);
+    buf++;
+  }
+  return len;
+#else
+  (void) buf;
+  (void) len;
+  return 0;
+#endif
+}
+
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+volatile uint32_t system_ticks = 0;
+void SysTick_Handler(void) {
+  system_ticks++;
+}
+
+uint32_t board_millis(void) {
+  return system_ticks;
+}
+
+void SVC_Handler(void) {
+}
+
+void PendSV_Handler(void) {
+}
+#endif
+
+void HardFault_Handler(void) {
+  __asm("BKPT #0\n");
+}
+
+// Required by __libc_init_array in startup code if we are compiling using
+// -nostdlib/-nostartfiles.
+void _init(void) {
+}
+
+#ifdef USE_FULL_ASSERT
+void assert_failed(const char *file, uint32_t line) {
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */

managed_components/espressif__tinyusb/hw/bsp/at32f403a_407/family.cmake

@@ -0,0 +1,108 @@
+include_guard()
+
+set(AT32_FAMILY at32f403a_407)
+set(AT32_SDK_LIB ${TOP}/hw/mcu/artery/${AT32_FAMILY}/libraries)
+
+string(TOUPPER ${AT32_FAMILY} AT32_FAMILY_UPPER)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS ${AT32_FAMILY_UPPER} CACHE INTERNAL "")
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (TARGET ${BOARD_TARGET})
+    return()
+  endif ()
+
+  # Startup & Linker script
+  set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s)
+  set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU})
+  set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s)
+
+  if (NOT DEFINED LD_FILE_GNU)
+    set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld)
+  endif ()
+  set(LD_FILE_Clang ${LD_FILE_GNU})
+  set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf)
+
+  add_library(${BOARD_TARGET} STATIC
+    ${AT32_SDK_LIB}/cmsis/cm4/device_support/system_${AT32_FAMILY}.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_gpio.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_misc.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_usart.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_acc.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_crm.c
+    ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+    )
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${AT32_SDK_LIB}/cmsis/cm4/core_support
+    ${AT32_SDK_LIB}/cmsis/cm4/device_support
+    ${AT32_SDK_LIB}/drivers/inc
+    )
+
+  update_board(${BOARD_TARGET})
+
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_GNU}"
+      -nostartfiles
+      --specs=nosys.specs --specs=nano.specs
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_Clang}"
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--config=${LD_FILE_IAR}"
+      )
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER})
+  target_sources(${TARGET} PUBLIC
+    ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
+    )
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD})
+
+  # Flashing
+  family_add_bin_hex(${TARGET})
+  family_flash_jlink(${TARGET})
+endfunction()

managed_components/espressif__tinyusb/hw/bsp/at32f403a_407/family.mk

@@ -0,0 +1,41 @@
+AT32_FAMILY = at32f403a_407
+AT32_SDK_LIB = hw/mcu/artery/${AT32_FAMILY}/libraries
+
+include $(TOP)/$(BOARD_PATH)/board.mk
+
+CPU_CORE ?= cortex-m4
+
+CFLAGS_GCC += \
+  -flto
+
+CFLAGS += \
+	-DCFG_TUSB_MCU=OPT_MCU_AT32F403A_407
+
+LDFLAGS_GCC += \
+	-flto --specs=nosys.specs -nostdlib -nostartfiles
+
+SRC_C += \
+	src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_gpio.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_misc.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_usart.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_acc.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_crm.c \
+	$(AT32_SDK_LIB)/cmsis/cm4/device_support/system_${AT32_FAMILY}.c
+
+INC += \
+	$(TOP)/$(BOARD_PATH) \
+	$(TOP)/$(AT32_SDK_LIB)/drivers/inc \
+	$(TOP)/$(AT32_SDK_LIB)/cmsis/cm4/core_support \
+	$(TOP)/$(AT32_SDK_LIB)/cmsis/cm4/device_support
+
+SRC_S_GCC += ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s
+SRC_S_IAR += ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s
+
+LD_FILE_GCC ?= ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld
+LD_FILE_IAR ?= ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf
+
+# For freeRTOS port source
+FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F
+
+flash: flash-atlink

managed_components/espressif__tinyusb/hw/bsp/at32f413/FreeRTOSConfig/FreeRTOSConfig.h

@@ -0,0 +1,177 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+// Include MCU header
+  #include "at32f413.h"
+
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU								        0
+#define configENABLE_FPU								        1
+#define configENABLE_TRUSTZONE					        0
+#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               4
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         1
+#define configSUPPORT_DYNAMIC_ALLOCATION        0
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+#define configCHECK_HANDLER_INSTALLATION       0
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+#ifdef __RX__
+/* Renesas RX series */
+#define vSoftwareInterruptISR					        INT_Excep_ICU_SWINT
+#define vTickISR								              INT_Excep_CMT0_CMI0
+#define configPERIPHERAL_CLOCK_HZ				      (configCPU_CLOCK_HZ/2)
+#define configKERNEL_INTERRUPT_PRIORITY			  1
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY	4
+
+#else
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+#if defined(__NVIC_PRIO_BITS)
+  // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h
+	#define configPRIO_BITS       __NVIC_PRIO_BITS
+
+#elif defined(__ECLIC_INTCTLBITS)
+  // RISC-V Bumblebee core from nuclei
+  #define configPRIO_BITS       __ECLIC_INTCTLBITS
+
+#elif defined(__IASMARM__)
+  // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS.
+  // Therefore we will hard coded it to minimum value of 2 to get pass ci build.
+  // IAR user must update this to correct value of the target MCU
+  #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU"
+  #define configPRIO_BITS       2
+
+#else
+  #error "FreeRTOS configPRIO_BITS to be defined"
+#endif
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
+
+#endif /* __FREERTOS_CONFIG__H */

managed_components/espressif__tinyusb/hw/bsp/at32f413/at32f413_clock.c

@@ -0,0 +1,94 @@
+/**
+  **************************************************************************
+  * @file     at32f413_clock.c
+  * @brief    system clock config program
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f413_clock.h"
+
+/**
+  * @brief  system clock config program
+  * @note   the system clock is configured as follow:
+  *         system clock (sclk)   = hext / 2 * pll_mult
+  *         system clock source   = pll (hext)
+  *         - hext                = HEXT_VALUE
+  *         - sclk                = 192000000
+  *         - ahbdiv              = 1
+  *         - ahbclk              = 192000000
+  *         - apb2div             = 2
+  *         - apb2clk             = 96000000
+  *         - apb1div             = 2
+  *         - apb1clk             = 96000000
+  *         - pll_mult            = 48
+  *         - pll_range           = GT72MHZ (greater than 72 mhz)
+  * @param  none
+  * @retval none
+  */
+void system_clock_config(void)
+{
+  /* reset crm */
+  crm_reset();
+
+  crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
+
+   /* wait till hext is ready */
+  while(crm_hext_stable_wait() == ERROR)
+  {
+  }
+
+  /* config pll clock resource */
+  crm_pll_config(CRM_PLL_SOURCE_HEXT_DIV, CRM_PLL_MULT_48, CRM_PLL_OUTPUT_RANGE_GT72MHZ);
+
+  /* enable pll */
+  crm_clock_source_enable(CRM_CLOCK_SOURCE_PLL, TRUE);
+
+  /* wait till pll is ready */
+  while(crm_flag_get(CRM_PLL_STABLE_FLAG) != SET)
+  {
+  }
+
+  /* config ahbclk */
+  crm_ahb_div_set(CRM_AHB_DIV_1);
+
+  /* config apb2clk, the maximum frequency of APB1/APB2 clock is 100 MHz  */
+  crm_apb2_div_set(CRM_APB2_DIV_2);
+
+  /* config apb1clk, the maximum frequency of APB1/APB2 clock is 100 MHz  */
+  crm_apb1_div_set(CRM_APB1_DIV_2);
+
+  /* enable auto step mode */
+  crm_auto_step_mode_enable(TRUE);
+
+  /* select pll as system clock source */
+  crm_sysclk_switch(CRM_SCLK_PLL);
+
+  /* wait till pll is used as system clock source */
+  while(crm_sysclk_switch_status_get() != CRM_SCLK_PLL)
+  {
+  }
+
+  /* disable auto step mode */
+  crm_auto_step_mode_enable(FALSE);
+
+  /* update system_core_clock global variable */
+  system_core_clock_update();
+}

managed_components/espressif__tinyusb/hw/bsp/at32f413/at32f413_clock.h

@@ -0,0 +1,43 @@
+/**
+  **************************************************************************
+  * @file     at32f413_clock.h
+  * @brief    header file of clock program
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F413_CLOCK_H
+#define __AT32F413_CLOCK_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f413.h"
+
+/* exported functions ------------------------------------------------------- */
+void system_clock_config(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __AT32F413_CLOCK_H */

managed_components/espressif__tinyusb/hw/bsp/at32f413/at32f413_conf.h

@@ -0,0 +1,157 @@
+/**
+  **************************************************************************
+  * @file     at32f413_conf.h
+  * @brief    at32f413 config header file
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F413_CONF_H
+#define __AT32F413_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+  * @brief in the following line adjust the value of high speed external crystal (hext)
+  * used in your application
+  *
+  * tip: to avoid modifying this file each time you need to use different hext, you
+  *      can define the hext value in your toolchain compiler preprocessor.
+  *
+  */
+#if !defined  HEXT_VALUE
+#define HEXT_VALUE               ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
+#endif
+
+/**
+  * @brief in the following line adjust the high speed external crystal (hext) startup
+  * timeout value
+  */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed external clock in hz */
+
+/* module define -------------------------------------------------------------*/
+#define CRM_MODULE_ENABLED
+#define TMR_MODULE_ENABLED
+#define RTC_MODULE_ENABLED
+#define BPR_MODULE_ENABLED
+#define GPIO_MODULE_ENABLED
+#define I2C_MODULE_ENABLED
+#define USART_MODULE_ENABLED
+#define PWC_MODULE_ENABLED
+#define CAN_MODULE_ENABLED
+#define ADC_MODULE_ENABLED
+#define SPI_MODULE_ENABLED
+#define DMA_MODULE_ENABLED
+#define DEBUG_MODULE_ENABLED
+#define FLASH_MODULE_ENABLED
+#define CRC_MODULE_ENABLED
+#define WWDT_MODULE_ENABLED
+#define WDT_MODULE_ENABLED
+#define EXINT_MODULE_ENABLED
+#define SDIO_MODULE_ENABLED
+#define USB_MODULE_ENABLED
+#define ACC_MODULE_ENABLED
+#define MISC_MODULE_ENABLED
+
+/* includes ------------------------------------------------------------------*/
+#ifdef CRM_MODULE_ENABLED
+#include "at32f413_crm.h"
+#endif
+#ifdef TMR_MODULE_ENABLED
+#include "at32f413_tmr.h"
+#endif
+#ifdef RTC_MODULE_ENABLED
+#include "at32f413_rtc.h"
+#endif
+#ifdef BPR_MODULE_ENABLED
+#include "at32f413_bpr.h"
+#endif
+#ifdef GPIO_MODULE_ENABLED
+#include "at32f413_gpio.h"
+#endif
+#ifdef I2C_MODULE_ENABLED
+#include "at32f413_i2c.h"
+#endif
+#ifdef USART_MODULE_ENABLED
+#include "at32f413_usart.h"
+#endif
+#ifdef PWC_MODULE_ENABLED
+#include "at32f413_pwc.h"
+#endif
+#ifdef CAN_MODULE_ENABLED
+#include "at32f413_can.h"
+#endif
+#ifdef ADC_MODULE_ENABLED
+#include "at32f413_adc.h"
+#endif
+#ifdef SPI_MODULE_ENABLED
+#include "at32f413_spi.h"
+#endif
+#ifdef DMA_MODULE_ENABLED
+#include "at32f413_dma.h"
+#endif
+#ifdef DEBUG_MODULE_ENABLED
+#include "at32f413_debug.h"
+#endif
+#ifdef FLASH_MODULE_ENABLED
+#include "at32f413_flash.h"
+#endif
+#ifdef CRC_MODULE_ENABLED
+#include "at32f413_crc.h"
+#endif
+#ifdef WWDT_MODULE_ENABLED
+#include "at32f413_wwdt.h"
+#endif
+#ifdef WDT_MODULE_ENABLED
+#include "at32f413_wdt.h"
+#endif
+#ifdef EXINT_MODULE_ENABLED
+#include "at32f413_exint.h"
+#endif
+#ifdef SDIO_MODULE_ENABLED
+#include "at32f413_sdio.h"
+#endif
+#ifdef ACC_MODULE_ENABLED
+#include "at32f413_acc.h"
+#endif
+#ifdef MISC_MODULE_ENABLED
+#include "at32f413_misc.h"
+#endif
+#ifdef USB_MODULE_ENABLED
+#include "at32f413_usb.h"
+#endif
+
+/**
+  * @}
+  */
+
+  /**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

managed_components/espressif__tinyusb/hw/bsp/at32f413/at32f413_int.c

@@ -0,0 +1,139 @@
+/**
+  **************************************************************************
+  * @file     at32f413_int.c
+  * @brief    main interrupt service routines.
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f413_int.h"
+
+/** @addtogroup AT32F413_periph_examples
+  * @{
+  */
+
+/** @addtogroup 413_USB_device_msc
+  * @{
+  */
+
+/**
+  * @brief  this function handles nmi exception.
+  * @param  none
+  * @retval none
+  */
+void NMI_Handler(void)
+{
+}
+
+/**
+  * @brief  this function handles hard fault exception.
+  * @param  none
+  * @retval none
+  */
+// void HardFault_Handler(void)
+// {
+//   /* go to infinite loop when hard fault exception occurs */
+//   while(1)
+//   {
+//   }
+// }
+
+/**
+  * @brief  this function handles memory manage exception.
+  * @param  none
+  * @retval none
+  */
+void MemManage_Handler(void)
+{
+  /* go to infinite loop when memory manage exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles bus fault exception.
+  * @param  none
+  * @retval none
+  */
+void BusFault_Handler(void)
+{
+  /* go to infinite loop when bus fault exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles usage fault exception.
+  * @param  none
+  * @retval none
+  */
+void UsageFault_Handler(void)
+{
+  /* go to infinite loop when usage fault exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles svcall exception.
+  * @param  none
+  * @retval none
+  */
+// void SVC_Handler(void)
+// {
+// }
+
+/**
+  * @brief  this function handles debug monitor exception.
+  * @param  none
+  * @retval none
+  */
+void DebugMon_Handler(void)
+{
+}
+
+/**
+  * @brief  this function handles pendsv_handler exception.
+  * @param  none
+  * @retval none
+  */
+// void PendSV_Handler(void)
+// {
+// }
+
+/**
+  * @brief  this function handles systick handler.
+  * @param  none
+  * @retval none
+  */
+// void SysTick_Handler(void)
+// {
+// }
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

managed_components/espressif__tinyusb/hw/bsp/at32f413/at32f413_int.h

@@ -0,0 +1,55 @@
+/**
+  **************************************************************************
+  * @file     at32f413_int.h
+  * @brief    header file of main interrupt service routines.
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F413_INT_H
+#define __AT32F413_INT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f413.h"
+
+/* exported types ------------------------------------------------------------*/
+/* exported constants --------------------------------------------------------*/
+/* exported macro ------------------------------------------------------------*/
+/* exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

managed_components/espressif__tinyusb/hw/bsp/at32f413/boards/at_start_f413/board.cmake

@@ -0,0 +1,8 @@
+set(MCU_VARIANT AT32F413RCT7)
+set(MCU_LINKER_NAME AT32F413xC)
+
+set(JLINK_DEVICE ${MCU_VARIANT})
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC ${MCU_VARIANT})
+endfunction()

managed_components/espressif__tinyusb/hw/bsp/at32f413/boards/at_start_f413/board.h

@@ -0,0 +1,67 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   name: AT-START-F413
+   url: https://www.arterychip.com/en/product/AT32F413.jsp
+*/
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// LED
+#define LED_PORT              GPIOC
+#define LED_PIN               GPIO_PINS_2
+#define LED_STATE_ON          0 // Active Low
+#define LED_GPIO_CLK_EN()     crm_periph_clock_enable(CRM_GPIOC_PERIPH_CLOCK, TRUE)
+
+// Button
+#define BUTTON_PORT           GPIOA
+#define BUTTON_PIN            GPIO_PINS_0
+#define BUTTON_STATE_ACTIVE   1
+#define BUTTON_GPIO_CLK_EN()  crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE)
+
+// UART
+#define PRINT_UART                       USART1
+#define PRINT_UART_CRM_CLK               CRM_USART1_PERIPH_CLOCK
+#define PRINT_UART_TX_PIN                GPIO_PINS_9
+#define PRINT_UART_TX_GPIO               GPIOA
+#define PRINT_UART_TX_GPIO_CRM_CLK       CRM_GPIOA_PERIPH_CLOCK
+
+static inline void board_vbus_sense_init(void)
+{
+
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */

managed_components/espressif__tinyusb/hw/bsp/at32f413/boards/at_start_f413/board.mk

@@ -0,0 +1,8 @@
+MCU_VARIANT = AT32F413RCT7
+MCU_LINKER_NAME = AT32F413xC
+
+JLINK_DEVICE = ${MCU_VARIANT}
+
+CFLAGS += \
+  -D${MCU_VARIANT} \
+  -DCFG_EXAMPLE_VIDEO_READONLY

managed_components/espressif__tinyusb/hw/bsp/at32f413/family.c

@@ -0,0 +1,279 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   manufacturer: Artery
+*/
+
+#include "at32f413_clock.h"
+#include "board.h"
+#include "bsp/board_api.h"
+
+void usb_clock48m_select(usb_clk48_s clk_s);
+void uart_print_init(uint32_t baudrate);
+
+//--------------------------------------------------------------------+
+// Forward USB interrupt events to TinyUSB IRQ Handler
+//--------------------------------------------------------------------+
+void USBFS_H_CAN1_TX_IRQHandler(void) {
+  tud_int_handler(0);
+}
+void USBFS_L_CAN1_RX0_IRQHandler(void) {
+  tud_int_handler(0);
+}
+void USBFS_MAPH_IRQHandler(void) {
+  tud_int_handler(0);
+}
+void USBFS_MAPL_IRQHandler(void) {
+  tud_int_handler(0);
+}
+void USBFSWakeUp_IRQHandler(void) {
+  tud_int_handler(0);
+}
+
+void board_init(void) {
+  system_clock_config();
+
+  /* config nvic priority group */
+  nvic_priority_group_config(NVIC_PRIORITY_GROUP_4);
+
+  /* select usb 48m clcok source */
+  usb_clock48m_select(USB_CLK_HICK);
+
+  /* configure systick */
+  systick_clock_source_config(SYSTICK_CLOCK_SOURCE_AHBCLK_NODIV);
+
+  /* enable usb clock */
+  crm_periph_clock_enable(CRM_USB_PERIPH_CLOCK, TRUE);
+
+  SysTick_Config(SystemCoreClock / 1000);
+#if CFG_TUSB_OS == OPT_OS_FREERTOS
+  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
+  NVIC_SetPriority(USBFS_H_CAN1_TX_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+  NVIC_SetPriority(USBFS_L_CAN1_RX0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+  NVIC_SetPriority(USBFSWakeUp_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+#endif
+
+  /* LED */
+  gpio_init_type gpio_led_init_struct;
+  /* enable the led clock */
+  LED_GPIO_CLK_EN();
+  /* set default parameter */
+  gpio_default_para_init(&gpio_led_init_struct);
+  /* configure the led gpio */
+  gpio_led_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_led_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_led_init_struct.gpio_mode = GPIO_MODE_OUTPUT;
+  gpio_led_init_struct.gpio_pins = LED_PIN;
+  gpio_led_init_struct.gpio_pull = GPIO_PULL_NONE;
+  gpio_init(LED_PORT, &gpio_led_init_struct);
+
+  /* Button */
+  gpio_init_type gpio_button_init_struct;
+  /* enable the button clock */
+  BUTTON_GPIO_CLK_EN();
+  /* set default parameter */
+  gpio_default_para_init(&gpio_button_init_struct);
+  /* configure the button gpio */
+  gpio_button_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_button_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_button_init_struct.gpio_mode = GPIO_MODE_INPUT;
+  gpio_button_init_struct.gpio_pins = BUTTON_PIN;
+  gpio_button_init_struct.gpio_pull = GPIO_PULL_DOWN;
+  gpio_init(BUTTON_PORT, &gpio_button_init_struct);
+
+  uart_print_init(115200);
+  printf("usart printf config success!\r\n");
+}
+
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+/**
+  * @brief  usb 48M clock select
+  * @param  clk_s:USB_CLK_HICK, USB_CLK_HEXT
+  * @retval none
+  */
+void usb_clock48m_select(usb_clk48_s clk_s) {
+  if (clk_s == USB_CLK_HICK) {
+    crm_usb_clock_source_select(CRM_USB_CLOCK_SOURCE_HICK);
+
+    /* enable the acc calibration ready interrupt */
+    crm_periph_clock_enable(CRM_ACC_PERIPH_CLOCK, TRUE);
+
+    /* update the c1\c2\c3 value */
+    acc_write_c1(7980);
+    acc_write_c2(8000);
+    acc_write_c3(8020);
+
+    /* open acc calibration */
+    acc_calibration_mode_enable(ACC_CAL_HICKTRIM, TRUE);
+  } else {
+    switch (system_core_clock) {
+      /* 48MHz */
+      case 48000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_1);
+        break;
+
+      /* 72MHz */
+      case 72000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_1_5);
+        break;
+
+      /* 96MHz */
+      case 96000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_2);
+        break;
+
+      /* 120MHz */
+      case 120000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_2_5);
+        break;
+
+      /* 144MHz */
+      case 144000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_3);
+        break;
+
+      /* 168MHz */
+      case 168000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_3_5);
+        break;
+
+      /* 192MHz */
+      case 192000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_4);
+        break;
+
+      default:
+        break;
+    }
+  }
+}
+
+void uart_print_init(uint32_t baudrate) {
+  gpio_init_type gpio_init_struct;
+  /* enable the uart and gpio clock */
+  crm_periph_clock_enable(PRINT_UART_CRM_CLK, TRUE);
+  crm_periph_clock_enable(PRINT_UART_TX_GPIO_CRM_CLK, TRUE);
+  gpio_default_para_init(&gpio_init_struct);
+  /* configure the uart tx pin */
+  gpio_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_init_struct.gpio_mode = GPIO_MODE_MUX;
+  gpio_init_struct.gpio_pins = PRINT_UART_TX_PIN;
+  gpio_init_struct.gpio_pull = GPIO_PULL_NONE;
+  gpio_init(PRINT_UART_TX_GPIO, &gpio_init_struct);
+  /* configure uart param */
+  usart_init(PRINT_UART, baudrate, USART_DATA_8BITS, USART_STOP_1_BIT);
+  usart_transmitter_enable(PRINT_UART, TRUE);
+  usart_enable(PRINT_UART, TRUE);
+}
+
+void board_led_write(bool state) {
+  gpio_bits_write(LED_PORT, LED_PIN, state ^ (!LED_STATE_ON));
+}
+
+uint32_t board_button_read(void) {
+  return gpio_input_data_bit_read(BUTTON_PORT, BUTTON_PIN);
+}
+
+size_t board_get_unique_id(uint8_t id[], size_t max_len) {
+  (void) max_len;
+  volatile uint32_t *at32_uuid = ((volatile uint32_t *) 0x1FFFF7E8);
+  uint32_t *id32 = (uint32_t *) (uintptr_t) id;
+  uint8_t const len = 12;
+
+  id32[0] = at32_uuid[0];
+  id32[1] = at32_uuid[1];
+  id32[2] = at32_uuid[2];
+
+  return len;
+}
+
+int board_uart_read(uint8_t *buf, int len) {
+  (void) buf;
+  (void) len;
+  return 0;
+}
+
+int board_uart_write(void const *buf, int len) {
+#if CFG_TUSB_OS == OPT_OS_NONE
+  int txsize = len;
+  u16 timeout = 0xffff;
+  while (txsize--) {
+    while (usart_flag_get(PRINT_UART, USART_TDBE_FLAG) == RESET) {
+      timeout--;
+      if (timeout == 0) {
+        return 0;
+      }
+    }
+    PRINT_UART->dt = (*((uint8_t const *) buf) & 0x01FF);
+    buf++;
+  }
+  return len;
+#else
+  (void) buf;
+  (void) len;
+  return 0;
+#endif
+}
+
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+volatile uint32_t system_ticks = 0;
+void SysTick_Handler(void) {
+  system_ticks++;
+}
+
+uint32_t board_millis(void) {
+  return system_ticks;
+}
+
+void SVC_Handler(void) {
+}
+
+void PendSV_Handler(void) {
+}
+#endif
+
+void HardFault_Handler(void) {
+  __asm("BKPT #0\n");
+}
+
+// Required by __libc_init_array in startup code if we are compiling using
+// -nostdlib/-nostartfiles.
+void _init(void) {
+}
+
+#ifdef USE_FULL_ASSERT
+void assert_failed(const char *file, uint32_t line) {
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */

managed_components/espressif__tinyusb/hw/bsp/at32f413/family.cmake

@@ -0,0 +1,108 @@
+include_guard()
+
+set(AT32_FAMILY at32f413)
+set(AT32_SDK_LIB ${TOP}/hw/mcu/artery/${AT32_FAMILY}/libraries)
+
+string(TOUPPER ${AT32_FAMILY} AT32_FAMILY_UPPER)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS ${AT32_FAMILY_UPPER} CACHE INTERNAL "")
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (TARGET ${BOARD_TARGET})
+    return()
+  endif ()
+
+  # Startup & Linker script
+  set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s)
+  set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU})
+  set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s)
+
+  if (NOT DEFINED LD_FILE_GNU)
+    set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld)
+  endif ()
+  set(LD_FILE_Clang ${LD_FILE_GNU})
+  set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf)
+
+  add_library(${BOARD_TARGET} STATIC
+    ${AT32_SDK_LIB}/cmsis/cm4/device_support/system_${AT32_FAMILY}.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_gpio.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_misc.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_usart.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_acc.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_crm.c
+    ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+    )
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${AT32_SDK_LIB}/cmsis/cm4/core_support
+    ${AT32_SDK_LIB}/cmsis/cm4/device_support
+    ${AT32_SDK_LIB}/drivers/inc
+    )
+
+  update_board(${BOARD_TARGET})
+
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_GNU}"
+      -nostartfiles
+      --specs=nosys.specs --specs=nano.specs
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_Clang}"
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--config=${LD_FILE_IAR}"
+      )
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER})
+  target_sources(${TARGET} PUBLIC
+    ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
+    )
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD})
+
+  # Flashing
+  family_add_bin_hex(${TARGET})
+  family_flash_jlink(${TARGET})
+endfunction()

managed_components/espressif__tinyusb/hw/bsp/at32f413/family.mk

@@ -0,0 +1,41 @@
+AT32_FAMILY = at32f413
+AT32_SDK_LIB = hw/mcu/artery/${AT32_FAMILY}/libraries
+
+include $(TOP)/$(BOARD_PATH)/board.mk
+
+CPU_CORE ?= cortex-m4
+
+CFLAGS_GCC += \
+  -flto
+
+CFLAGS += \
+	-DCFG_TUSB_MCU=OPT_MCU_AT32F413
+
+LDFLAGS_GCC += \
+	-flto --specs=nosys.specs -nostdlib -nostartfiles
+
+SRC_C += \
+	src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_gpio.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_misc.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_usart.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_acc.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_crm.c \
+	$(AT32_SDK_LIB)/cmsis/cm4/device_support/system_${AT32_FAMILY}.c
+
+INC += \
+	$(TOP)/$(BOARD_PATH) \
+	$(TOP)/$(AT32_SDK_LIB)/drivers/inc \
+	$(TOP)/$(AT32_SDK_LIB)/cmsis/cm4/core_support \
+	$(TOP)/$(AT32_SDK_LIB)/cmsis/cm4/device_support
+
+SRC_S_GCC += ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s
+SRC_S_IAR += ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s
+
+LD_FILE_GCC ?= ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld
+LD_FILE_IAR ?= ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf
+
+# For freeRTOS port source
+FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F
+
+flash: flash-atlink

managed_components/espressif__tinyusb/hw/bsp/at32f415/FreeRTOSConfig/FreeRTOSConfig.h

@@ -0,0 +1,177 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+// Include MCU header
+  #include "at32f415.h"
+
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU								        0
+#define configENABLE_FPU								        1
+#define configENABLE_TRUSTZONE					        0
+#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               4
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         1
+#define configSUPPORT_DYNAMIC_ALLOCATION        0
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+#define configCHECK_HANDLER_INSTALLATION       0
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+#ifdef __RX__
+/* Renesas RX series */
+#define vSoftwareInterruptISR					        INT_Excep_ICU_SWINT
+#define vTickISR								              INT_Excep_CMT0_CMI0
+#define configPERIPHERAL_CLOCK_HZ				      (configCPU_CLOCK_HZ/2)
+#define configKERNEL_INTERRUPT_PRIORITY			  1
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY	4
+
+#else
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+#if defined(__NVIC_PRIO_BITS)
+  // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h
+	#define configPRIO_BITS       __NVIC_PRIO_BITS
+
+#elif defined(__ECLIC_INTCTLBITS)
+  // RISC-V Bumblebee core from nuclei
+  #define configPRIO_BITS       __ECLIC_INTCTLBITS
+
+#elif defined(__IASMARM__)
+  // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS.
+  // Therefore we will hard coded it to minimum value of 2 to get pass ci build.
+  // IAR user must update this to correct value of the target MCU
+  #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU"
+  #define configPRIO_BITS       2
+
+#else
+  #error "FreeRTOS configPRIO_BITS to be defined"
+#endif
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
+
+#endif /* __FREERTOS_CONFIG__H */

managed_components/espressif__tinyusb/hw/bsp/at32f415/at32f415_clock.c

@@ -0,0 +1,92 @@
+/**
+  **************************************************************************
+  * @file     at32f415_clock.c
+  * @brief    system clock config program
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f415_clock.h"
+
+/**
+  * @brief  system clock config program
+  * @note   the system clock is configured as follow:
+  *         system clock (sclk)   = hick8m / 2 * pll_mult
+  *         system clock source   = pll (hick)
+  *         - hick                = HICK_VALUE
+  *         - sclk                = 144000000
+  *         - ahbdiv              = 1
+  *         - ahbclk              = 144000000
+  *         - apb2div             = 2
+  *         - apb2clk             = 72000000
+  *         - apb1div             = 2
+  *         - apb1clk             = 72000000
+  *         - pll_mult            = 36
+  *         - flash_wtcyc         = 4 cycle
+  * @param  none
+  * @retval none
+  */
+void system_clock_config(void)
+{
+  /* config flash psr register */
+  flash_psr_set(FLASH_WAIT_CYCLE_4);
+
+  /* reset crm */
+  crm_reset();
+
+  crm_clock_source_enable(CRM_CLOCK_SOURCE_HICK, TRUE);
+
+  /* config pll clock resource */
+  crm_pll_config(CRM_PLL_SOURCE_HICK, CRM_PLL_MULT_36);
+
+  /* enable pll */
+  crm_clock_source_enable(CRM_CLOCK_SOURCE_PLL, TRUE);
+
+  /* wait till pll is ready */
+  while(crm_flag_get(CRM_PLL_STABLE_FLAG) != SET)
+  {
+  }
+
+  /* config ahbclk */
+  crm_ahb_div_set(CRM_AHB_DIV_1);
+
+  /* config apb2clk, the maximum frequency of APB1/APB2 clock is 75 MHz  */
+  crm_apb2_div_set(CRM_APB2_DIV_2);
+
+  /* config apb1clk, the maximum frequency of APB1/APB2 clock is 75 MHz  */
+  crm_apb1_div_set(CRM_APB1_DIV_2);
+
+  /* enable auto step mode */
+  crm_auto_step_mode_enable(TRUE);
+
+  /* select pll as system clock source */
+  crm_sysclk_switch(CRM_SCLK_PLL);
+
+  /* wait till pll is used as system clock source */
+  while(crm_sysclk_switch_status_get() != CRM_SCLK_PLL)
+  {
+  }
+
+  /* disable auto step mode */
+  crm_auto_step_mode_enable(FALSE);
+
+  /* update system_core_clock global variable */
+  system_core_clock_update();
+}

managed_components/espressif__tinyusb/hw/bsp/at32f415/at32f415_clock.h

@@ -0,0 +1,43 @@
+/**
+  **************************************************************************
+  * @file     at32f415_clock.h
+  * @brief    header file of clock program
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F415_CLOCK_H
+#define __AT32F415_CLOCK_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f415.h"
+
+/* exported functions ------------------------------------------------------- */
+void system_clock_config(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __AT32F415_CLOCK_H */

managed_components/espressif__tinyusb/hw/bsp/at32f415/at32f415_conf.h

@@ -0,0 +1,143 @@
+/**
+  **************************************************************************
+  * @file     at32f415_conf.h
+  * @brief    at32f415 config header file
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F415_CONF_H
+#define __AT32F415_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+  * @brief in the following line adjust the value of high speed external crystal (hext)
+  * used in your application
+  * tip: to avoid modifying this file each time you need to use different hext, you
+  *      can define the hext value in your toolchain compiler preprocessor.
+  */
+#if !defined  HEXT_VALUE
+#define HEXT_VALUE               ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
+#endif
+
+/**
+  * @brief in the following line adjust the high speed external crystal (hext) startup
+  * timeout value
+  */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed external clock in hz */
+
+/* module define -------------------------------------------------------------*/
+#define CRM_MODULE_ENABLED
+#define CMP_MODULE_ENABLED
+#define TMR_MODULE_ENABLED
+#define ERTC_MODULE_ENABLED
+#define GPIO_MODULE_ENABLED
+#define I2C_MODULE_ENABLED
+#define USART_MODULE_ENABLED
+#define PWC_MODULE_ENABLED
+#define CAN_MODULE_ENABLED
+#define ADC_MODULE_ENABLED
+#define SPI_MODULE_ENABLED
+#define DMA_MODULE_ENABLED
+#define DEBUG_MODULE_ENABLED
+#define FLASH_MODULE_ENABLED
+#define CRC_MODULE_ENABLED
+#define WWDT_MODULE_ENABLED
+#define WDT_MODULE_ENABLED
+#define EXINT_MODULE_ENABLED
+#define SDIO_MODULE_ENABLED
+#define USB_MODULE_ENABLED
+#define MISC_MODULE_ENABLED
+
+/* includes ------------------------------------------------------------------*/
+#ifdef CRM_MODULE_ENABLED
+#include "at32f415_crm.h"
+#endif
+#ifdef CMP_MODULE_ENABLED
+#include "at32f415_cmp.h"
+#endif
+#ifdef TMR_MODULE_ENABLED
+#include "at32f415_tmr.h"
+#endif
+#ifdef ERTC_MODULE_ENABLED
+#include "at32f415_ertc.h"
+#endif
+#ifdef GPIO_MODULE_ENABLED
+#include "at32f415_gpio.h"
+#endif
+#ifdef I2C_MODULE_ENABLED
+#include "at32f415_i2c.h"
+#endif
+#ifdef USART_MODULE_ENABLED
+#include "at32f415_usart.h"
+#endif
+#ifdef PWC_MODULE_ENABLED
+#include "at32f415_pwc.h"
+#endif
+#ifdef CAN_MODULE_ENABLED
+#include "at32f415_can.h"
+#endif
+#ifdef ADC_MODULE_ENABLED
+#include "at32f415_adc.h"
+#endif
+#ifdef SPI_MODULE_ENABLED
+#include "at32f415_spi.h"
+#endif
+#ifdef DMA_MODULE_ENABLED
+#include "at32f415_dma.h"
+#endif
+#ifdef DEBUG_MODULE_ENABLED
+#include "at32f415_debug.h"
+#endif
+#ifdef FLASH_MODULE_ENABLED
+#include "at32f415_flash.h"
+#endif
+#ifdef CRC_MODULE_ENABLED
+#include "at32f415_crc.h"
+#endif
+#ifdef WWDT_MODULE_ENABLED
+#include "at32f415_wwdt.h"
+#endif
+#ifdef WDT_MODULE_ENABLED
+#include "at32f415_wdt.h"
+#endif
+#ifdef EXINT_MODULE_ENABLED
+#include "at32f415_exint.h"
+#endif
+#ifdef SDIO_MODULE_ENABLED
+#include "at32f415_sdio.h"
+#endif
+#ifdef MISC_MODULE_ENABLED
+#include "at32f415_misc.h"
+#endif
+#ifdef USB_MODULE_ENABLED
+#include "at32f415_usb.h"
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __AT32F415_CONF_H */

managed_components/espressif__tinyusb/hw/bsp/at32f415/at32f415_int.c

@@ -0,0 +1,119 @@
+/**
+  **************************************************************************
+  * @file     at32f415_int.c
+  * @brief    main interrupt service routines.
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f415_int.h"
+
+/** @addtogroup AT32F415_periph_examples
+  * @{
+  */
+
+/** @addtogroup 415_CRC_calculation
+  * @{
+  */
+
+/**
+  * @brief  this function handles nmi exception.
+  * @param  none
+  * @retval none
+  */
+void NMI_Handler(void)
+{
+}
+
+/**
+  * @brief  this function handles memory manage exception.
+  * @param  none
+  * @retval none
+  */
+void MemManage_Handler(void)
+{
+  /* go to infinite loop when memory manage exception occurs */
+
+  while(1)
+  {
+  }
+
+}
+
+/**
+  * @brief  this function handles bus fault exception.
+  * @param  none
+  * @retval none
+  */
+void BusFault_Handler(void)
+{
+  /* go to infinite loop when bus fault exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles usage fault exception.
+  * @param  none
+  * @retval none
+  */
+void UsageFault_Handler(void)
+{
+  /* go to infinite loop when usage fault exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles svcall exception.
+  * @param  none
+  * @retval none
+  */
+//void SVC_Handler(void)
+//{
+//}
+
+/**
+  * @brief  this function handles debug monitor exception.
+  * @param  none
+  * @retval none
+  */
+void DebugMon_Handler(void)
+{
+}
+
+/**
+  * @brief  this function handles pendsv_handler exception.
+  * @param  none
+  * @retval none
+  */
+//void PendSV_Handler(void)
+//{
+//}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

managed_components/espressif__tinyusb/hw/bsp/at32f415/at32f415_int.h

@@ -0,0 +1,55 @@
+/**
+  **************************************************************************
+  * @file     at32f415_int.h
+  * @brief    header file of main interrupt service routines.
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F415_INT_H
+#define __AT32F415_INT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f415.h"
+
+/* exported types ------------------------------------------------------------*/
+/* exported constants --------------------------------------------------------*/
+/* exported macro ------------------------------------------------------------*/
+/* exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

managed_components/espressif__tinyusb/hw/bsp/at32f415/boards/at_start_f415/board.cmake

@@ -0,0 +1,11 @@
+set(MCU_VARIANT AT32F415RCT7)
+set(MCU_LINKER_NAME AT32F415xC)
+
+set(JLINK_DEVICE ${MCU_VARIANT})
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    ${MCU_VARIANT}
+    CFG_EXAMPLE_VIDEO_READONLY
+    )
+endfunction()

managed_components/espressif__tinyusb/hw/bsp/at32f415/boards/at_start_f415/board.h

@@ -0,0 +1,85 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   name: AT-START-F415
+   url: https://www.arterychip.com/en/product/AT32F415.jsp
+*/
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#define USB_VBUS_IGNORE
+
+// LED
+#define LED_PORT              GPIOC
+#define LED_PIN               GPIO_PINS_2
+#define LED_STATE_ON          0 // Active Low
+#define LED_GPIO_CLK_EN()     crm_periph_clock_enable(CRM_GPIOC_PERIPH_CLOCK, TRUE)
+
+// Button
+#define BUTTON_PORT           GPIOA
+#define BUTTON_PIN            GPIO_PINS_0
+#define BUTTON_STATE_ACTIVE   1
+#define BUTTON_GPIO_CLK_EN()  crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE)
+
+// Usart
+#define PRINT_UART                       USART1
+#define PRINT_UART_CRM_CLK               CRM_USART1_PERIPH_CLOCK
+#define PRINT_UART_TX_PIN                GPIO_PINS_9
+#define PRINT_UART_TX_GPIO               GPIOA
+#define PRINT_UART_TX_GPIO_CRM_CLK       CRM_GPIOA_PERIPH_CLOCK
+
+//USB
+#define USB_ID                           0
+#define OTG_CLOCK                        CRM_OTGFS1_PERIPH_CLOCK
+#define OTG_IRQ                          OTGFS1_IRQn
+#define OTG_IRQ_HANDLER                  OTGFS1_IRQHandler
+#define OTG_WKUP_IRQ                     OTGFS1_WKUP_IRQn
+#define OTG_WKUP_HANDLER                 OTGFS1_WKUP_IRQHandler
+#define OTG_WKUP_EXINT_LINE              EXINT_LINE_18
+#define OTG_PIN_GPIO                     GPIOA
+#define OTG_PIN_GPIO_CLOCK               CRM_GPIOA_PERIPH_CLOCK
+#define OTG_PIN_VBUS                     GPIO_PINS_9
+#define OTG_PIN_ID                       GPIO_PINS_10
+#define OTG_PIN_SOF_GPIO                 GPIOA
+#define OTG_PIN_SOF_GPIO_CLOCK           CRM_GPIOA_PERIPH_CLOCK
+#define OTG_PIN_SOF                      GPIO_PINS_8
+
+static inline void board_vbus_sense_init(void)
+{
+    *(int*)(0x50000038) |= (1<<21);
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */

managed_components/espressif__tinyusb/hw/bsp/at32f415/boards/at_start_f415/board.mk

@@ -0,0 +1,8 @@
+MCU_VARIANT = AT32F415RCT7
+MCU_LINKER_NAME = AT32F415xC
+
+JLINK_DEVICE = ${MCU_VARIANT}
+
+CFLAGS += \
+  -D${MCU_VARIANT} \
+  -DCFG_EXAMPLE_VIDEO_READONLY

managed_components/espressif__tinyusb/hw/bsp/at32f415/family.c

@@ -0,0 +1,275 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   manufacturer: Artery
+*/
+
+#include "at32f415_clock.h"
+#include "board.h"
+#include "bsp/board_api.h"
+
+void uart_print_init(uint32_t baudrate);
+void usb_clock48m_select(usb_clk48_s clk_s);
+void led_and_button_init(void);
+
+//--------------------------------------------------------------------+
+// Forward USB interrupt events to TinyUSB IRQ Handler
+//--------------------------------------------------------------------+
+void OTGFS1_IRQHandler(void) {
+  tusb_int_handler(0, true);
+}
+void OTGFS1_WKUP_IRQHandler(void) {
+  tusb_int_handler(0, true);
+}
+
+void board_init(void) {
+  /* config nvic priority group */
+  nvic_priority_group_config(NVIC_PRIORITY_GROUP_4);
+
+  /* config system clock */
+  system_clock_config();
+
+  /* enable usb clock */
+  crm_periph_clock_enable(OTG_CLOCK, TRUE);
+
+  /* select usb 48m clcok source */
+  usb_clock48m_select(USB_CLK_HEXT);
+
+  /* vbus ignore */
+  board_vbus_sense_init();
+
+  /* configure systick */
+  systick_clock_source_config(SYSTICK_CLOCK_SOURCE_AHBCLK_NODIV);
+  SysTick_Config(SystemCoreClock / 1000);
+#if CFG_TUSB_OS == OPT_OS_FREERTOS
+  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
+  NVIC_SetPriority(OTG_IRQ, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+#endif
+
+/* otgfs use vbus pin */
+#ifndef USB_VBUS_IGNORE
+  gpio_init_type gpio_init_struct;
+  crm_periph_clock_enable(OTG_PIN_GPIO_CLOCK, TRUE);
+  gpio_default_para_init(&gpio_init_struct);
+  gpio_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_init_struct.gpio_mode = GPIO_MODE_MUX;
+  gpio_init_struct.gpio_pins = OTG_PIN_VBUS;
+  gpio_init_struct.gpio_pull = GPIO_PULL_DOWN;
+  gpio_pin_mux_config(OTG_PIN_GPIO, OTG_PIN_VBUS_SOURCE, OTG_PIN_MUX);
+  gpio_init(OTG_PIN_GPIO, &gpio_init_struct);
+#endif
+
+  /* config led and key */
+  led_and_button_init();
+
+  /* config usart printf */
+  uart_print_init(115200);
+  printf("usart printf config success!\r\n");
+}
+
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+/**
+  * @brief  usb 48M clock select
+  * @param  clk_s:USB_CLK_HICK, USB_CLK_HEXT
+  * @retval none
+  */
+void usb_clock48m_select(usb_clk48_s clk_s) {
+  (void) clk_s;
+  switch (system_core_clock) {
+    /* 48MHz */
+    case 48000000:
+      crm_usb_clock_div_set(CRM_USB_DIV_1);
+      break;
+
+    /* 72MHz */
+    case 72000000:
+      crm_usb_clock_div_set(CRM_USB_DIV_1_5);
+      break;
+
+    /* 96MHz */
+    case 96000000:
+      crm_usb_clock_div_set(CRM_USB_DIV_2);
+      break;
+
+    /* 120MHz */
+    case 120000000:
+      crm_usb_clock_div_set(CRM_USB_DIV_2_5);
+      break;
+
+    /* 144MHz */
+    case 144000000:
+      crm_usb_clock_div_set(CRM_USB_DIV_3);
+      break;
+
+    default:
+      break;
+  }
+}
+
+void led_and_button_init(void) {
+  /* LED */
+  gpio_init_type gpio_led_init_struct;
+  /* enable the led clock */
+  LED_GPIO_CLK_EN();
+  /* set default parameter */
+  gpio_default_para_init(&gpio_led_init_struct);
+  /* configure the led gpio */
+  gpio_led_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_led_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_led_init_struct.gpio_mode = GPIO_MODE_OUTPUT;
+  gpio_led_init_struct.gpio_pins = LED_PIN;
+  gpio_led_init_struct.gpio_pull = GPIO_PULL_NONE;
+  gpio_init(LED_PORT, &gpio_led_init_struct);
+  /* Button */
+  gpio_init_type gpio_button_init_struct;
+  /* enable the button clock */
+  BUTTON_GPIO_CLK_EN();
+  /* set default parameter */
+  gpio_default_para_init(&gpio_button_init_struct);
+  /* configure the button gpio */
+  gpio_button_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_button_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_button_init_struct.gpio_mode = GPIO_MODE_INPUT;
+  gpio_button_init_struct.gpio_pins = BUTTON_PIN;
+  gpio_button_init_struct.gpio_pull = GPIO_PULL_DOWN;
+  gpio_init(BUTTON_PORT, &gpio_button_init_struct);
+}
+
+/**
+  * @brief  initialize uart
+  * @param  baudrate: uart baudrate
+  * @retval none
+  */
+void uart_print_init(uint32_t baudrate) {
+  gpio_init_type gpio_init_struct;
+  /* enable the uart and gpio clock */
+  crm_periph_clock_enable(PRINT_UART_CRM_CLK, TRUE);
+  crm_periph_clock_enable(PRINT_UART_TX_GPIO_CRM_CLK, TRUE);
+  gpio_default_para_init(&gpio_init_struct);
+  /* configure the uart tx pin */
+  gpio_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_init_struct.gpio_mode = GPIO_MODE_MUX;
+  gpio_init_struct.gpio_pins = PRINT_UART_TX_PIN;
+  gpio_init_struct.gpio_pull = GPIO_PULL_NONE;
+  gpio_init(PRINT_UART_TX_GPIO, &gpio_init_struct);
+  /* configure uart param */
+  usart_init(PRINT_UART, baudrate, USART_DATA_8BITS, USART_STOP_1_BIT);
+  usart_transmitter_enable(PRINT_UART, TRUE);
+  usart_enable(PRINT_UART, TRUE);
+}
+
+// Get characters from UART. Return number of read bytes
+int board_uart_read(uint8_t *buf, int len) {
+  (void) buf;
+  (void) len;
+  return 0;
+}
+
+// Send characters to UART. Return number of sent bytes
+int board_uart_write(void const *buf, int len) {
+#if CFG_TUSB_OS == OPT_OS_NONE
+  int txsize = len;
+  u16 timeout = 0xffff;
+  while (txsize--) {
+    while (usart_flag_get(PRINT_UART, USART_TDBE_FLAG) == RESET) {
+      timeout--;
+      if (timeout == 0) {
+        return 0;
+      }
+    }
+    PRINT_UART->dt = (*((uint8_t const *) buf) & 0x01FF);
+    buf++;
+  }
+  return len;
+#else
+  (void) buf;
+  (void) len;
+  return 0;
+#endif
+}
+
+void board_led_write(bool state) {
+  gpio_bits_write(LED_PORT, LED_PIN, state ^ (!LED_STATE_ON));
+}
+
+uint32_t board_button_read(void) {
+  return gpio_input_data_bit_read(BUTTON_PORT, BUTTON_PIN);
+}
+
+size_t board_get_unique_id(uint8_t id[], size_t max_len) {
+  (void) max_len;
+  volatile uint32_t *at32_uuid = ((volatile uint32_t *) 0x1FFFF7E8);
+  uint32_t *id32 = (uint32_t *) (uintptr_t) id;
+  uint8_t const len = 12;
+
+  id32[0] = at32_uuid[0];
+  id32[1] = at32_uuid[1];
+  id32[2] = at32_uuid[2];
+
+  return len;
+}
+
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+
+volatile uint32_t system_ticks = 0;
+void SysTick_Handler(void) {
+  system_ticks++;
+}
+
+uint32_t board_millis(void) {
+  return system_ticks;
+}
+
+void SVC_Handler(void) {
+}
+
+void PendSV_Handler(void) {
+}
+#endif
+
+void HardFault_Handler(void) {
+  __asm("BKPT #0\n");
+}
+
+// Required by __libc_init_array in startup code if we are compiling using
+// -nostdlib/-nostartfiles.
+void _init(void) {
+}
+
+#ifdef USE_FULL_ASSERT
+void assert_failed(const char *file, uint32_t line) {
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */

managed_components/espressif__tinyusb/hw/bsp/at32f415/family.cmake

@@ -0,0 +1,108 @@
+include_guard()
+
+set(AT32_FAMILY at32f415)
+set(AT32_SDK_LIB ${TOP}/hw/mcu/artery/${AT32_FAMILY}/libraries)
+
+string(TOUPPER ${AT32_FAMILY} AT32_FAMILY_UPPER)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_CPU cortex-m4-nofpu CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS ${AT32_FAMILY_UPPER} CACHE INTERNAL "")
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (TARGET ${BOARD_TARGET})
+    return()
+  endif ()
+
+  # Startup & Linker script
+  set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s)
+  set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU})
+  set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s)
+
+  if (NOT DEFINED LD_FILE_GNU)
+    set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld)
+  endif ()
+  set(LD_FILE_Clang ${LD_FILE_GNU})
+  set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf)
+
+  add_library(${BOARD_TARGET} STATIC
+    ${AT32_SDK_LIB}/cmsis/cm4/device_support/system_${AT32_FAMILY}.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_gpio.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_misc.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_usart.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_crm.c
+    ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+    )
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${AT32_SDK_LIB}/cmsis/cm4/core_support
+    ${AT32_SDK_LIB}/cmsis/cm4/device_support
+    ${AT32_SDK_LIB}/drivers/inc
+    )
+  update_board(${BOARD_TARGET})
+
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_GNU}"
+      -nostartfiles
+      --specs=nosys.specs --specs=nano.specs
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_Clang}"
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--config=${LD_FILE_IAR}"
+      )
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER})
+  target_sources(${TARGET} PUBLIC
+    ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c
+    ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c
+    ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c
+    )
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD})
+
+  # Flashing
+  family_add_bin_hex(${TARGET})
+  family_flash_jlink(${TARGET})
+endfunction()

managed_components/espressif__tinyusb/hw/bsp/at32f415/family.mk

@@ -0,0 +1,39 @@
+AT32_FAMILY = at32f415
+AT32_SDK_LIB = hw/mcu/artery/${AT32_FAMILY}/libraries
+
+include $(TOP)/$(BOARD_PATH)/board.mk
+
+CPU_CORE ?= cortex-m4-nofpu
+
+CFLAGS_GCC += \
+  -flto
+
+CFLAGS += \
+	-DCFG_TUSB_MCU=OPT_MCU_AT32F415 \
+
+LDFLAGS_GCC += \
+	-flto --specs=nosys.specs -nostdlib -nostartfiles
+
+SRC_C += \
+	src/portable/synopsys/dwc2/dcd_dwc2.c \
+	src/portable/synopsys/dwc2/hcd_dwc2.c \
+	src/portable/synopsys/dwc2/dwc2_common.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_gpio.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_misc.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_usart.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_crm.c \
+	$(AT32_SDK_LIB)/cmsis/cm4/device_support/system_${AT32_FAMILY}.c
+
+INC += \
+	$(TOP)/$(BOARD_PATH) \
+	$(TOP)/$(AT32_SDK_LIB)/drivers/inc \
+	$(TOP)/$(AT32_SDK_LIB)/cmsis/cm4/core_support \
+	$(TOP)/$(AT32_SDK_LIB)/cmsis/cm4/device_support
+
+SRC_S_GCC += ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s
+SRC_S_IAR += ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s
+
+LD_FILE_GCC ?= ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld
+LD_FILE_IAR ?= ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf
+
+flash: flash-atlink

managed_components/espressif__tinyusb/hw/bsp/at32f423/FreeRTOSConfig/FreeRTOSConfig.h

@@ -0,0 +1,177 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+// Include MCU header
+  #include "at32f423.h"
+
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU								        0
+#define configENABLE_FPU								        1
+#define configENABLE_TRUSTZONE					        0
+#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               4
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         1
+#define configSUPPORT_DYNAMIC_ALLOCATION        0
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+#define configCHECK_HANDLER_INSTALLATION       0
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+#ifdef __RX__
+/* Renesas RX series */
+#define vSoftwareInterruptISR					        INT_Excep_ICU_SWINT
+#define vTickISR								              INT_Excep_CMT0_CMI0
+#define configPERIPHERAL_CLOCK_HZ				      (configCPU_CLOCK_HZ/2)
+#define configKERNEL_INTERRUPT_PRIORITY			  1
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY	4
+
+#else
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+#if defined(__NVIC_PRIO_BITS)
+  // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h
+	#define configPRIO_BITS       __NVIC_PRIO_BITS
+
+#elif defined(__ECLIC_INTCTLBITS)
+  // RISC-V Bumblebee core from nuclei
+  #define configPRIO_BITS       __ECLIC_INTCTLBITS
+
+#elif defined(__IASMARM__)
+  // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS.
+  // Therefore we will hard coded it to minimum value of 2 to get pass ci build.
+  // IAR user must update this to correct value of the target MCU
+  #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU"
+  #define configPRIO_BITS       2
+
+#else
+  #error "FreeRTOS configPRIO_BITS to be defined"
+#endif
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
+
+#endif /* __FREERTOS_CONFIG__H */

managed_components/espressif__tinyusb/hw/bsp/at32f423/at32f423_clock.c

@@ -0,0 +1,127 @@
+/**
+  **************************************************************************
+  * @file     at32f423_clock.c
+  * @brief    system clock config program
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f423_clock.h"
+
+/**
+  * @brief  system clock config program
+  * @note   the system clock is configured as follow:
+  *         system clock (sclk)   = (hext * pll_ns)/(pll_ms * pll_fr) / 2
+  *         system clock source   = pll (hext)
+  *         - hext                = HEXT_VALUE
+  *         - sclk                = 144000000
+  *         - ahbdiv              = 1
+  *         - ahbclk              = 144000000
+  *         - apb2div             = 1
+  *         - apb2clk             = 144000000
+  *         - apb1div             = 2
+  *         - apb1clk             = 72000000
+  *         - pll_ns              = 72
+  *         - pll_ms              = 1
+  *         - pll_fr              = 1
+  * @param  none
+  * @retval none
+  */
+void system_clock_config(void)
+{
+  /* reset crm */
+  crm_reset();
+
+  /* config flash psr register */
+  flash_psr_set(FLASH_WAIT_CYCLE_4);
+
+  /* enable pwc periph clock */
+  crm_periph_clock_enable(CRM_PWC_PERIPH_CLOCK, TRUE);
+
+  /* ensure system clock to highest, set power ldo output voltage to 1.3v */
+  pwc_ldo_output_voltage_set(PWC_LDO_OUTPUT_1V3);
+
+  crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
+
+  /* wait till hext is ready */
+  while(crm_hext_stable_wait() == ERROR)
+  {
+  }
+
+  /* config pll clock resource
+  common frequency config list: pll source selected  hick or hext(8mhz)
+  _____________________________________________________________________________
+  |        |         |         |         |         |         |        |        |
+  | sysclk |   150   |   144   |   120   |   108   |   96    |   72   |   36   |
+  |________|_________|_________|_________|_________|_________|_________________|
+  |        |         |         |         |         |         |        |        |
+  |pll_ns  |   75    |   72    |   120   |   108   |   96    |   72   |   72   |
+  |        |         |         |         |         |         |        |        |
+  |pll_ms  |   1     |   1     |   1     |   1     |   1     |   1    |   1    |
+  |        |         |         |         |         |         |        |        |
+  |pll_fr  |   FR_2  |   FR_2  |   FR_4  |   FR_4  |   FR_4  |   FR_4 |   FR_8 |
+  |________|_________|_________|_________|_________|_________|________|________|
+
+  if pll clock source selects hext with other frequency values, or configure pll to other
+  frequency values, please use the at32 new clock  configuration tool for configuration. */
+  crm_pll_config(CRM_PLL_SOURCE_HEXT, 72, 1, CRM_PLL_FR_2);
+
+  /* enable pll */
+  crm_clock_source_enable(CRM_CLOCK_SOURCE_PLL, TRUE);
+
+  /* wait till pll is ready */
+  while(crm_flag_get(CRM_PLL_STABLE_FLAG) != SET)
+  {
+  }
+
+  /* config ahbclk */
+  crm_ahb_div_set(CRM_AHB_DIV_1);
+
+  /* config apb2clk, the maximum frequency of APB2 clock is 150 MHz  */
+  crm_apb2_div_set(CRM_APB2_DIV_1);
+
+  /* config apb1clk, the maximum frequency of APB1 clock is 120 MHz  */
+  crm_apb1_div_set(CRM_APB1_DIV_2);
+
+  /* enable auto step mode */
+  crm_auto_step_mode_enable(TRUE);
+
+  /* select pll as system clock source */
+  crm_sysclk_switch(CRM_SCLK_PLL);
+
+  /* wait till pll is used as system clock source */
+  while(crm_sysclk_switch_status_get() != CRM_SCLK_PLL)
+  {
+  }
+
+  /* disable auto step mode */
+  crm_auto_step_mode_enable(FALSE);
+
+  /* update system_core_clock global variable */
+  system_core_clock_update();
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

managed_components/espressif__tinyusb/hw/bsp/at32f423/at32f423_clock.h

@@ -0,0 +1,43 @@
+/**
+  **************************************************************************
+  * @file     at32f423_clock.h
+  * @brief    header file of clock program
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F423_CLOCK_H
+#define __AT32F423_CLOCK_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f423.h"
+
+/* exported functions ------------------------------------------------------- */
+void system_clock_config(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

managed_components/espressif__tinyusb/hw/bsp/at32f423/at32f423_conf.h

@@ -0,0 +1,153 @@
+/**
+  **************************************************************************
+  * @file     at32f423_conf.h
+  * @brief    at32f423 config header file
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F423_CONF_H
+#define __AT32F423_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+  * @brief in the following line adjust the value of high speed external crystal (hext)
+  * used in your application
+  *
+  * tip: to avoid modifying this file each time you need to use different hext, you
+  *      can define the hext value in your toolchain compiler preprocessor.
+  *
+  */
+#if !defined  HEXT_VALUE
+#define HEXT_VALUE                       ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
+#endif
+
+/**
+  * @brief in the following line adjust the high speed external crystal (hext) startup
+  * timeout value
+  */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed external clock in hz */
+
+/* module define -------------------------------------------------------------*/
+#define CRM_MODULE_ENABLED
+#define TMR_MODULE_ENABLED
+#define ERTC_MODULE_ENABLED
+#define GPIO_MODULE_ENABLED
+#define I2C_MODULE_ENABLED
+#define USART_MODULE_ENABLED
+#define PWC_MODULE_ENABLED
+#define CAN_MODULE_ENABLED
+#define ADC_MODULE_ENABLED
+#define DAC_MODULE_ENABLED
+#define SPI_MODULE_ENABLED
+#define DMA_MODULE_ENABLED
+#define DEBUG_MODULE_ENABLED
+#define FLASH_MODULE_ENABLED
+#define CRC_MODULE_ENABLED
+#define WWDT_MODULE_ENABLED
+#define WDT_MODULE_ENABLED
+#define EXINT_MODULE_ENABLED
+#define XMC_MODULE_ENABLED
+#define USB_MODULE_ENABLED
+#define ACC_MODULE_ENABLED
+#define MISC_MODULE_ENABLED
+#define SCFG_MODULE_ENABLED
+
+/* includes ------------------------------------------------------------------*/
+#ifdef CRM_MODULE_ENABLED
+#include "at32f423_crm.h"
+#endif
+#ifdef TMR_MODULE_ENABLED
+#include "at32f423_tmr.h"
+#endif
+#ifdef ERTC_MODULE_ENABLED
+#include "at32f423_ertc.h"
+#endif
+#ifdef GPIO_MODULE_ENABLED
+#include "at32f423_gpio.h"
+#endif
+#ifdef I2C_MODULE_ENABLED
+#include "at32f423_i2c.h"
+#endif
+#ifdef USART_MODULE_ENABLED
+#include "at32f423_usart.h"
+#endif
+#ifdef PWC_MODULE_ENABLED
+#include "at32f423_pwc.h"
+#endif
+#ifdef CAN_MODULE_ENABLED
+#include "at32f423_can.h"
+#endif
+#ifdef ADC_MODULE_ENABLED
+#include "at32f423_adc.h"
+#endif
+#ifdef DAC_MODULE_ENABLED
+#include "at32f423_dac.h"
+#endif
+#ifdef SPI_MODULE_ENABLED
+#include "at32f423_spi.h"
+#endif
+#ifdef DMA_MODULE_ENABLED
+#include "at32f423_dma.h"
+#endif
+#ifdef DEBUG_MODULE_ENABLED
+#include "at32f423_debug.h"
+#endif
+#ifdef FLASH_MODULE_ENABLED
+#include "at32f423_flash.h"
+#endif
+#ifdef CRC_MODULE_ENABLED
+#include "at32f423_crc.h"
+#endif
+#ifdef WWDT_MODULE_ENABLED
+#include "at32f423_wwdt.h"
+#endif
+#ifdef WDT_MODULE_ENABLED
+#include "at32f423_wdt.h"
+#endif
+#ifdef EXINT_MODULE_ENABLED
+#include "at32f423_exint.h"
+#endif
+#ifdef XMC_MODULE_ENABLED
+#include "at32f423_xmc.h"
+#endif
+#ifdef ACC_MODULE_ENABLED
+#include "at32f423_acc.h"
+#endif
+#ifdef MISC_MODULE_ENABLED
+#include "at32f423_misc.h"
+#endif
+#ifdef SCFG_MODULE_ENABLED
+#include "at32f423_scfg.h"
+#endif
+#ifdef USB_MODULE_ENABLED
+#include "at32f423_usb.h"
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

managed_components/espressif__tinyusb/hw/bsp/at32f423/at32f423_int.c

@@ -0,0 +1,139 @@
+/**
+  **************************************************************************
+  * @file     at32f423_int.c
+  * @brief    main interrupt service routines.
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f423_int.h"
+
+/** @addtogroup AT32F423_periph_examples
+  * @{
+  */
+
+/** @addtogroup 423_USB_device_msc
+  * @{
+  */
+
+/**
+  * @brief  this function handles nmi exception.
+  * @param  none
+  * @retval none
+  */
+void NMI_Handler(void)
+{
+}
+
+/**
+  * @brief  this function handles hard fault exception.
+  * @param  none
+  * @retval none
+  */
+//void HardFault_Handler(void)
+//{
+  /* go to infinite loop when hard fault exception occurs */
+  //while(1)
+  //{
+  //}
+//}
+
+/**
+  * @brief  this function handles memory manage exception.
+  * @param  none
+  * @retval none
+  */
+void MemManage_Handler(void)
+{
+  /* go to infinite loop when memory manage exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles bus fault exception.
+  * @param  none
+  * @retval none
+  */
+void BusFault_Handler(void)
+{
+  /* go to infinite loop when bus fault exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles usage fault exception.
+  * @param  none
+  * @retval none
+  */
+void UsageFault_Handler(void)
+{
+  /* go to infinite loop when usage fault exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles svcall exception.
+  * @param  none
+  * @retval none
+  */
+//void SVC_Handler(void)
+//{
+//}
+
+/**
+  * @brief  this function handles debug monitor exception.
+  * @param  none
+  * @retval none
+  */
+void DebugMon_Handler(void)
+{
+}
+
+/**
+  * @brief  this function handles pendsv_handler exception.
+  * @param  none
+  * @retval none
+  */
+//void PendSV_Handler(void)
+//{
+//}
+
+/**
+  * @brief  this function handles systick handler.
+  * @param  none
+  * @retval none
+  */
+//void SysTick_Handler(void)
+//{
+//}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

managed_components/espressif__tinyusb/hw/bsp/at32f423/at32f423_int.h

@@ -0,0 +1,55 @@
+/**
+  **************************************************************************
+  * @file     at32f423_int.h
+  * @brief    header file of main interrupt service routines.
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F423_INT_H
+#define __AT32F423_INT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f423.h"
+
+/* exported types ------------------------------------------------------------*/
+/* exported constants --------------------------------------------------------*/
+/* exported macro ------------------------------------------------------------*/
+/* exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+//void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

managed_components/espressif__tinyusb/hw/bsp/at32f423/boards/at_start_f423/board.cmake

@@ -0,0 +1,8 @@
+set(MCU_VARIANT AT32F423VCT7)
+set(MCU_LINKER_NAME AT32F423xC)
+
+set(JLINK_DEVICE ${MCU_VARIANT})
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC ${MCU_VARIANT})
+endfunction()

managed_components/espressif__tinyusb/hw/bsp/at32f423/boards/at_start_f423/board.h

@@ -0,0 +1,96 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   name: AT-START-F423
+   url: https://www.arterychip.com/en/product/AT32F423.jsp
+*/
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#define USB_VBUS_IGNORE
+
+// LED
+#define LED_PORT              GPIOD
+#define LED_PIN               GPIO_PINS_13
+#define LED_STATE_ON          0 // Active Low
+#define LED_GPIO_CLK_EN()     crm_periph_clock_enable(CRM_GPIOD_PERIPH_CLOCK, TRUE)
+
+// Button
+#define BUTTON_PORT           GPIOA
+#define BUTTON_PIN            GPIO_PINS_0
+#define BUTTON_STATE_ACTIVE   1
+#define BUTTON_GPIO_CLK_EN()  crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE)
+
+// UART
+#define PRINT_UART                       USART1
+#define PRINT_UART_CRM_CLK               CRM_USART1_PERIPH_CLOCK
+#define PRINT_UART_TX_PIN                GPIO_PINS_9
+#define PRINT_UART_TX_GPIO               GPIOA
+#define PRINT_UART_TX_GPIO_CRM_CLK       CRM_GPIOA_PERIPH_CLOCK
+#define PRINT_UART_TX_PIN_SOURCE         GPIO_PINS_SOURCE9
+#define PRINT_UART_TX_PIN_MUX_NUM        GPIO_MUX_7
+
+//USB
+#define USB_ID                           0
+#define OTG_CLOCK                        CRM_OTGFS1_PERIPH_CLOCK
+#define OTG_IRQ                          OTGFS1_IRQn
+#define OTG_IRQ_HANDLER                  OTGFS1_IRQHandler
+#define OTG_WKUP_IRQ                     OTGFS1_WKUP_IRQn
+#define OTG_WKUP_HANDLER                 OTGFS1_WKUP_IRQHandler
+#define OTG_WKUP_EXINT_LINE              EXINT_LINE_18
+#define OTG_PIN_GPIO                     GPIOA
+#define OTG_PIN_GPIO_CLOCK               CRM_GPIOA_PERIPH_CLOCK
+#define OTG_PIN_DP                       GPIO_PINS_12
+#define OTG_PIN_DP_SOURCE                GPIO_PINS_SOURCE12
+#define OTG_PIN_DM                       GPIO_PINS_11
+#define OTG_PIN_DM_SOURCE                GPIO_PINS_SOURCE11
+#define OTG_PIN_VBUS                     GPIO_PINS_9
+#define OTG_PIN_VBUS_SOURCE              GPIO_PINS_SOURCE9
+#define OTG_PIN_ID                       GPIO_PINS_10
+#define OTG_PIN_ID_SOURCE                GPIO_PINS_SOURCE10
+#define OTG_PIN_SOF_GPIO                 GPIOA
+#define OTG_PIN_SOF_GPIO_CLOCK           CRM_GPIOA_PERIPH_CLOCK
+#define OTG_PIN_SOF                      GPIO_PINS_8
+#define OTG_PIN_SOF_SOURCE               GPIO_PINS_SOURCE8
+#define OTG_PIN_MUX                      GPIO_MUX_10
+
+//Vbus
+static inline void board_vbus_sense_init(void)
+{
+    *(int*)(0x50000038) |= (1<<21);
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */

managed_components/espressif__tinyusb/hw/bsp/at32f423/boards/at_start_f423/board.mk

@@ -0,0 +1,7 @@
+MCU_VARIANT = AT32F423VCT7
+MCU_LINKER_NAME = AT32F423xC
+
+JLINK_DEVICE = ${MCU_VARIANT}
+
+CFLAGS += \
+  -D${MCU_VARIANT}

managed_components/espressif__tinyusb/hw/bsp/at32f423/family.c

@@ -0,0 +1,279 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   manufacturer: Artery
+*/
+
+#include "at32f423_clock.h"
+#include "board.h"
+#include "bsp/board_api.h"
+
+void usb_clock48m_select(usb_clk48_s clk_s);
+void led_and_button_init(void);
+void uart_print_init(uint32_t baudrate);
+//--------------------------------------------------------------------+
+// Forward USB interrupt events to TinyUSB IRQ Handler
+//--------------------------------------------------------------------+
+void OTGFS1_IRQHandler(void) {
+  tusb_int_handler(0, true);
+}
+void OTGFS1_WKUP_IRQHandler(void) {
+  tusb_int_handler(0, true);
+}
+
+void board_init(void) {
+  /* config nvic priority group */
+  nvic_priority_group_config(NVIC_PRIORITY_GROUP_4);
+
+  /* config system clock */
+  system_clock_config();
+
+  /* enable usb clock */
+  crm_periph_clock_enable(OTG_CLOCK, TRUE);
+
+  /* select usb 48m clcok source */
+  usb_clock48m_select(USB_CLK_HEXT);
+
+  /* vbus ignore */
+  board_vbus_sense_init();
+
+  /* configure systick */
+  systick_clock_source_config(SYSTICK_CLOCK_SOURCE_AHBCLK_NODIV);
+  SysTick_Config(SystemCoreClock / 1000);
+#if CFG_TUSB_OS == OPT_OS_FREERTOS
+  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
+  NVIC_SetPriority(OTG_IRQ, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+#endif
+
+/* otgfs use vbus pin */
+#ifndef USB_VBUS_IGNORE
+  gpio_init_type gpio_init_struct;
+  crm_periph_clock_enable(OTG_PIN_GPIO_CLOCK, TRUE);
+  gpio_default_para_init(&gpio_init_struct);
+  gpio_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_init_struct.gpio_mode = GPIO_MODE_MUX;
+  gpio_init_struct.gpio_pins = OTG_PIN_VBUS;
+  gpio_init_struct.gpio_pull = GPIO_PULL_DOWN;
+  gpio_pin_mux_config(OTG_PIN_GPIO, OTG_PIN_VBUS_SOURCE, OTG_PIN_MUX);
+  gpio_init(OTG_PIN_GPIO, &gpio_init_struct);
+#endif
+
+  /* config led and key */
+  led_and_button_init();
+
+  /* config usart printf */
+  uart_print_init(115200);
+  printf("usart printf config success!\r\n");
+}
+
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+/**
+  * @brief  usb 48M clock select
+  * @param  clk_s:USB_CLK_HICK, USB_CLK_HEXT
+  * @retval none
+  */
+void usb_clock48m_select(usb_clk48_s clk_s) {
+  if (clk_s == USB_CLK_HICK) {
+    crm_usb_clock_source_select(CRM_USB_CLOCK_SOURCE_HICK);
+
+    /* enable the acc calibration ready interrupt */
+    crm_periph_clock_enable(CRM_ACC_PERIPH_CLOCK, TRUE);
+
+    /* update the c1\c2\c3 value */
+    acc_write_c1(7980);
+    acc_write_c2(8000);
+    acc_write_c3(8020);
+
+    /* open acc calibration */
+    acc_calibration_mode_enable(ACC_CAL_HICKTRIM, TRUE);
+  } else {
+    switch (system_core_clock) {
+      /* 48MHz */
+      case 48000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_2);
+        break;
+
+      /* 72MHz */
+      case 72000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_3);
+        break;
+
+      /* 96MHz */
+      case 96000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_4);
+        break;
+
+      /* 120MHz */
+      case 120000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_5);
+        break;
+
+      /* 144MHz */
+      case 144000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_6);
+        break;
+
+      default:
+        break;
+    }
+  }
+}
+void uart_print_init(uint32_t baudrate) {
+  gpio_init_type gpio_init_struct;
+  /* enable the uart and gpio clock */
+  crm_periph_clock_enable(PRINT_UART_CRM_CLK, TRUE);
+  crm_periph_clock_enable(PRINT_UART_TX_GPIO_CRM_CLK, TRUE);
+  gpio_default_para_init(&gpio_init_struct);
+  /* configure the uart tx pin */
+  gpio_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_init_struct.gpio_mode = GPIO_MODE_MUX;
+  gpio_init_struct.gpio_pins = PRINT_UART_TX_PIN;
+  gpio_init_struct.gpio_pull = GPIO_PULL_NONE;
+  gpio_init(PRINT_UART_TX_GPIO, &gpio_init_struct);
+  gpio_pin_mux_config(PRINT_UART_TX_GPIO, PRINT_UART_TX_PIN_SOURCE, PRINT_UART_TX_PIN_MUX_NUM);
+  /* configure uart param */
+  usart_init(PRINT_UART, baudrate, USART_DATA_8BITS, USART_STOP_1_BIT);
+  usart_transmitter_enable(PRINT_UART, TRUE);
+  usart_enable(PRINT_UART, TRUE);
+}
+
+void led_and_button_init(void) {
+  /* LED */
+  gpio_init_type gpio_led_init_struct;
+  /* enable the led clock */
+  LED_GPIO_CLK_EN();
+  /* set default parameter */
+  gpio_default_para_init(&gpio_led_init_struct);
+  /* configure the led gpio */
+  gpio_led_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_led_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_led_init_struct.gpio_mode = GPIO_MODE_OUTPUT;
+  gpio_led_init_struct.gpio_pins = LED_PIN;
+  gpio_led_init_struct.gpio_pull = GPIO_PULL_NONE;
+  gpio_init(LED_PORT, &gpio_led_init_struct);
+  /* Button */
+  gpio_init_type gpio_button_init_struct;
+  /* enable the button clock */
+  BUTTON_GPIO_CLK_EN();
+  /* set default parameter */
+  gpio_default_para_init(&gpio_button_init_struct);
+  /* configure the button gpio */
+  gpio_button_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_button_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_button_init_struct.gpio_mode = GPIO_MODE_INPUT;
+  gpio_button_init_struct.gpio_pins = BUTTON_PIN;
+  gpio_button_init_struct.gpio_pull = GPIO_PULL_DOWN;
+  gpio_init(BUTTON_PORT, &gpio_button_init_struct);
+}
+
+void board_led_write(bool state) {
+  gpio_bits_write(LED_PORT, LED_PIN, state ^ (!LED_STATE_ON));
+}
+
+uint32_t board_button_read(void) {
+  return gpio_input_data_bit_read(BUTTON_PORT, BUTTON_PIN);
+}
+
+size_t board_get_unique_id(uint8_t id[], size_t max_len) {
+  (void) max_len;
+  volatile uint32_t *at32_uuid = ((volatile uint32_t *) 0x1FFFF7E8);
+  uint32_t *id32 = (uint32_t *) (uintptr_t) id;
+  uint8_t const len = 12;
+
+  id32[0] = at32_uuid[0];
+  id32[1] = at32_uuid[1];
+  id32[2] = at32_uuid[2];
+
+  return len;
+}
+
+int board_uart_read(uint8_t *buf, int len) {
+  (void) buf;
+  (void) len;
+  return 0;
+}
+
+int board_uart_write(void const *buf, int len) {
+#if CFG_TUSB_OS == OPT_OS_NONE
+  int txsize = len;
+  u16 timeout = 0xffff;
+  while (txsize--) {
+    while (usart_flag_get(PRINT_UART, USART_TDBE_FLAG) == RESET) {
+      timeout--;
+      if (timeout == 0) {
+        return 0;
+      }
+    }
+    PRINT_UART->dt = (*((uint8_t const *) buf) & 0x01FF);
+    buf++;
+  }
+  return len;
+#else
+  (void) buf;
+  (void) len;
+  return 0;
+#endif
+}
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+volatile uint32_t system_ticks = 0;
+void SysTick_Handler(void) {
+  system_ticks++;
+}
+
+uint32_t board_millis(void) {
+  return system_ticks;
+}
+
+void SVC_Handler(void) {
+}
+
+void PendSV_Handler(void) {
+}
+#endif
+
+void HardFault_Handler(void) {
+  __asm("BKPT #0\n");
+}
+
+// Required by __libc_init_array in startup code if we are compiling using
+// -nostdlib/-nostartfiles.
+void _init(void) {
+}
+
+#ifdef USE_FULL_ASSERT
+void assert_failed(const char *file, uint32_t line) {
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */

managed_components/espressif__tinyusb/hw/bsp/at32f423/family.cmake

@@ -0,0 +1,110 @@
+include_guard()
+
+set(AT32_FAMILY at32f423)
+set(AT32_SDK_LIB ${TOP}/hw/mcu/artery/${AT32_FAMILY}/libraries)
+
+string(TOUPPER ${AT32_FAMILY} AT32_FAMILY_UPPER)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS ${AT32_FAMILY_UPPER} CACHE INTERNAL "")
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (TARGET ${BOARD_TARGET})
+    return()
+  endif ()
+
+  # Startup & Linker script
+  set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s)
+  set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU})
+  set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s)
+
+  if (NOT DEFINED LD_FILE_GNU)
+    set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld)
+  endif ()
+  set(LD_FILE_Clang ${LD_FILE_GNU})
+  set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf)
+
+  add_library(${BOARD_TARGET} STATIC
+    ${AT32_SDK_LIB}/cmsis/cm4/device_support/system_${AT32_FAMILY}.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_gpio.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_misc.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_usart.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_acc.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_crm.c
+    ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+    )
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${AT32_SDK_LIB}/cmsis/cm4/core_support
+    ${AT32_SDK_LIB}/cmsis/cm4/device_support
+    ${AT32_SDK_LIB}/drivers/inc
+    )
+
+  update_board(${BOARD_TARGET})
+
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_GNU}"
+      -nostartfiles
+      --specs=nosys.specs --specs=nano.specs
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_Clang}"
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--config=${LD_FILE_IAR}"
+      )
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER})
+  target_sources(${TARGET} PUBLIC
+    ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c
+    ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c
+    ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c
+    )
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD})
+
+  # Flashing
+  family_add_bin_hex(${TARGET})
+  family_flash_jlink(${TARGET})
+endfunction()

managed_components/espressif__tinyusb/hw/bsp/at32f423/family.mk

@@ -0,0 +1,40 @@
+AT32_FAMILY = at32f423
+AT32_SDK_LIB = hw/mcu/artery/${AT32_FAMILY}/libraries
+
+include $(TOP)/$(BOARD_PATH)/board.mk
+
+CPU_CORE ?= cortex-m4
+
+CFLAGS_GCC += \
+  -flto
+
+CFLAGS += \
+	-DCFG_TUSB_MCU=OPT_MCU_AT32F423 \
+
+LDFLAGS_GCC += \
+	-flto --specs=nosys.specs -nostdlib -nostartfiles
+
+SRC_C += \
+	src/portable/synopsys/dwc2/dcd_dwc2.c \
+	src/portable/synopsys/dwc2/hcd_dwc2.c \
+	src/portable/synopsys/dwc2/dwc2_common.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_gpio.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_misc.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_usart.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_crm.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_acc.c \
+	$(AT32_SDK_LIB)/cmsis/cm4/device_support/system_${AT32_FAMILY}.c
+
+INC += \
+	$(TOP)/$(BOARD_PATH) \
+	$(TOP)/$(AT32_SDK_LIB)/drivers/inc \
+	$(TOP)/$(AT32_SDK_LIB)/cmsis/cm4/core_support \
+	$(TOP)/$(AT32_SDK_LIB)/cmsis/cm4/device_support
+
+SRC_S_GCC += ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s
+SRC_S_IAR += ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s
+
+LD_FILE_GCC ?= ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld
+LD_FILE_IAR ?= ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf
+
+flash: flash-atlink

managed_components/espressif__tinyusb/hw/bsp/at32f425/FreeRTOSConfig/FreeRTOSConfig.h

@@ -0,0 +1,177 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+// Include MCU header
+  #include "at32f425.h"
+
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU								        0
+#define configENABLE_FPU								        1
+#define configENABLE_TRUSTZONE					        0
+#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               4
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         1
+#define configSUPPORT_DYNAMIC_ALLOCATION        0
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+#define configCHECK_HANDLER_INSTALLATION       0
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+#ifdef __RX__
+/* Renesas RX series */
+#define vSoftwareInterruptISR					        INT_Excep_ICU_SWINT
+#define vTickISR								              INT_Excep_CMT0_CMI0
+#define configPERIPHERAL_CLOCK_HZ				      (configCPU_CLOCK_HZ/2)
+#define configKERNEL_INTERRUPT_PRIORITY			  1
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY	4
+
+#else
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+#if defined(__NVIC_PRIO_BITS)
+  // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h
+	#define configPRIO_BITS       __NVIC_PRIO_BITS
+
+#elif defined(__ECLIC_INTCTLBITS)
+  // RISC-V Bumblebee core from nuclei
+  #define configPRIO_BITS       __ECLIC_INTCTLBITS
+
+#elif defined(__IASMARM__)
+  // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS.
+  // Therefore we will hard coded it to minimum value of 2 to get pass ci build.
+  // IAR user must update this to correct value of the target MCU
+  #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU"
+  #define configPRIO_BITS       2
+
+#else
+  #error "FreeRTOS configPRIO_BITS to be defined"
+#endif
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
+
+#endif /* __FREERTOS_CONFIG__H */

managed_components/espressif__tinyusb/hw/bsp/at32f425/at32f425_clock.c

@@ -0,0 +1,91 @@
+/**
+  **************************************************************************
+  * @file     at32f425_clock.c
+  * @brief    system clock config program
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f425_clock.h"
+
+/**
+  * @brief  system clock config program
+  * @note   the system clock is configured as follow:
+  *         system clock (sclk)   = hext * pll_mult
+  *         system clock source   = pll (hext)
+  *         - hext                = HEXT_VALUE
+  *         - sclk                = 96000000
+  *         - ahbdiv              = 1
+  *         - ahbclk              = 96000000
+  *         - apb2div             = 1
+  *         - apb2clk             = 96000000
+  *         - apb1div             = 1
+  *         - apb1clk             = 96000000
+  *         - pll_mult            = 12
+  *         - flash_wtcyc         = 2 cycle
+  * @param  none
+  * @retval none
+  */
+void system_clock_config(void)
+{
+  /* reset crm */
+  crm_reset();
+
+  /* config flash psr register */
+  flash_psr_set(FLASH_WAIT_CYCLE_2);
+
+  crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
+
+  /* wait till hext is ready */
+  while(crm_hext_stable_wait() == ERROR)
+  {
+  }
+
+  /* config pll clock resource */
+  crm_pll_config(CRM_PLL_SOURCE_HEXT, CRM_PLL_MULT_12);
+
+  /* enable pll */
+  crm_clock_source_enable(CRM_CLOCK_SOURCE_PLL, TRUE);
+
+  /* wait till pll is ready */
+  while(crm_flag_get(CRM_PLL_STABLE_FLAG) != SET)
+  {
+  }
+
+  /* config ahbclk */
+  crm_ahb_div_set(CRM_AHB_DIV_1);
+
+  /* config apb2clk, the maximum frequency of APB1/APB2 clock is 96 MHz  */
+  crm_apb2_div_set(CRM_APB2_DIV_1);
+
+  /* config apb1clk, the maximum frequency of APB1/APB2 clock is 96 MHz  */
+  crm_apb1_div_set(CRM_APB1_DIV_1);
+
+  /* select pll as system clock source */
+  crm_sysclk_switch(CRM_SCLK_PLL);
+
+  /* wait till pll is used as system clock source */
+  while(crm_sysclk_switch_status_get() != CRM_SCLK_PLL)
+  {
+  }
+
+  /* update system_core_clock global variable */
+  system_core_clock_update();
+}

managed_components/espressif__tinyusb/hw/bsp/at32f425/at32f425_clock.h

@@ -0,0 +1,43 @@
+/**
+  **************************************************************************
+  * @file     at32f425_clock.h
+  * @brief    header file of clock program
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F425_CLOCK_H
+#define __AT32F425_CLOCK_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f425.h"
+
+/* exported functions ------------------------------------------------------- */
+void system_clock_config(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

managed_components/espressif__tinyusb/hw/bsp/at32f425/at32f425_conf.h

@@ -0,0 +1,145 @@
+/**
+  **************************************************************************
+  * @file     at32f425_conf.h
+  * @brief    at32f425 config header file
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F425_CONF_H
+#define __AT32F425_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+  * @brief in the following line adjust the value of high speed external crystal (hext)
+  * used in your application
+  *
+  * tip: to avoid modifying this file each time you need to use different hext, you
+  *      can define the hext value in your toolchain compiler preprocessor.
+  *
+  */
+#if !defined  HEXT_VALUE
+#define HEXT_VALUE               ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
+#endif
+
+/**
+  * @brief in the following line adjust the high speed external crystal (hext) startup
+  * timeout value
+  */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed external clock in hz */
+
+/* module define -------------------------------------------------------------*/
+#define ACC_MODULE_ENABLED
+#define CRM_MODULE_ENABLED
+#define TMR_MODULE_ENABLED
+#define ERTC_MODULE_ENABLED
+#define GPIO_MODULE_ENABLED
+#define I2C_MODULE_ENABLED
+#define CAN_MODULE_ENABLED
+#define USB_MODULE_ENABLED
+#define USART_MODULE_ENABLED
+#define PWC_MODULE_ENABLED
+#define ADC_MODULE_ENABLED
+#define SPI_MODULE_ENABLED
+#define DMA_MODULE_ENABLED
+#define DEBUG_MODULE_ENABLED
+#define FLASH_MODULE_ENABLED
+#define CRC_MODULE_ENABLED
+#define WWDT_MODULE_ENABLED
+#define WDT_MODULE_ENABLED
+#define EXINT_MODULE_ENABLED
+#define MISC_MODULE_ENABLED
+#define SCFG_MODULE_ENABLED
+
+/* includes ------------------------------------------------------------------*/
+#ifdef ACC_MODULE_ENABLED
+#include "at32f425_acc.h"
+#endif
+#ifdef CRM_MODULE_ENABLED
+#include "at32f425_crm.h"
+#endif
+#ifdef CAN_MODULE_ENABLED
+#include "at32f425_can.h"
+#endif
+#ifdef USB_MODULE_ENABLED
+#include "at32f425_usb.h"
+#endif
+#ifdef TMR_MODULE_ENABLED
+#include "at32f425_tmr.h"
+#endif
+#ifdef ERTC_MODULE_ENABLED
+#include "at32f425_ertc.h"
+#endif
+#ifdef GPIO_MODULE_ENABLED
+#include "at32f425_gpio.h"
+#endif
+#ifdef I2C_MODULE_ENABLED
+#include "at32f425_i2c.h"
+#endif
+#ifdef USART_MODULE_ENABLED
+#include "at32f425_usart.h"
+#endif
+#ifdef PWC_MODULE_ENABLED
+#include "at32f425_pwc.h"
+#endif
+#ifdef ADC_MODULE_ENABLED
+#include "at32f425_adc.h"
+#endif
+#ifdef SPI_MODULE_ENABLED
+#include "at32f425_spi.h"
+#endif
+#ifdef DMA_MODULE_ENABLED
+#include "at32f425_dma.h"
+#endif
+#ifdef DEBUG_MODULE_ENABLED
+#include "at32f425_debug.h"
+#endif
+#ifdef FLASH_MODULE_ENABLED
+#include "at32f425_flash.h"
+#endif
+#ifdef CRC_MODULE_ENABLED
+#include "at32f425_crc.h"
+#endif
+#ifdef WWDT_MODULE_ENABLED
+#include "at32f425_wwdt.h"
+#endif
+#ifdef WDT_MODULE_ENABLED
+#include "at32f425_wdt.h"
+#endif
+#ifdef EXINT_MODULE_ENABLED
+#include "at32f425_exint.h"
+#endif
+#ifdef MISC_MODULE_ENABLED
+#include "at32f425_misc.h"
+#endif
+#ifdef SCFG_MODULE_ENABLED
+#include "at32f425_scfg.h"
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

managed_components/espressif__tinyusb/hw/bsp/at32f425/at32f425_int.c

@@ -0,0 +1,139 @@
+/**
+  **************************************************************************
+  * @file     at32f425_int.c
+  * @brief    main interrupt service routines.
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f425_int.h"
+
+/** @addtogroup AT32F425_periph_examples
+  * @{
+  */
+
+/** @addtogroup 425_USB_device_msc
+  * @{
+  */
+
+/**
+  * @brief  this function handles nmi exception.
+  * @param  none
+  * @retval none
+  */
+void NMI_Handler(void)
+{
+}
+
+/**
+  * @brief  this function handles hard fault exception.
+  * @param  none
+  * @retval none
+  */
+// void HardFault_Handler(void)
+// {
+//   /* go to infinite loop when hard fault exception occurs */
+//   while(1)
+//   {
+//   }
+// }
+
+/**
+  * @brief  this function handles memory manage exception.
+  * @param  none
+  * @retval none
+  */
+void MemManage_Handler(void)
+{
+  /* go to infinite loop when memory manage exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles bus fault exception.
+  * @param  none
+  * @retval none
+  */
+void BusFault_Handler(void)
+{
+  /* go to infinite loop when bus fault exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles usage fault exception.
+  * @param  none
+  * @retval none
+  */
+void UsageFault_Handler(void)
+{
+  /* go to infinite loop when usage fault exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles svcall exception.
+  * @param  none
+  * @retval none
+  */
+// void SVC_Handler(void)
+// {
+// }
+
+/**
+  * @brief  this function handles debug monitor exception.
+  * @param  none
+  * @retval none
+  */
+void DebugMon_Handler(void)
+{
+}
+
+/**
+  * @brief  this function handles pendsv_handler exception.
+  * @param  none
+  * @retval none
+  */
+// void PendSV_Handler(void)
+// {
+// }
+
+/**
+  * @brief  this function handles systick handler.
+  * @param  none
+  * @retval none
+  */
+// void SysTick_Handler(void)
+// {
+// }
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

managed_components/espressif__tinyusb/hw/bsp/at32f425/at32f425_int.h

@@ -0,0 +1,55 @@
+/**
+  **************************************************************************
+  * @file     at32f425_int.h
+  * @brief    header file of main interrupt service routines.
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F425_INT_H
+#define __AT32F425_INT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f425.h"
+
+/* exported types ------------------------------------------------------------*/
+/* exported constants --------------------------------------------------------*/
+/* exported macro ------------------------------------------------------------*/
+/* exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

managed_components/espressif__tinyusb/hw/bsp/at32f425/boards/at_start_f425/board.cmake

@@ -0,0 +1,12 @@
+set(MCU_VARIANT AT32F425R8T7)
+set(MCU_LINKER_NAME AT32F425x8)
+
+set(JLINK_DEVICE ${MCU_VARIANT})
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    ${MCU_VARIANT}
+    CFG_EXAMPLE_VIDEO_READONLY
+    CFG_EXAMPLE_MSC_READONLY
+    )
+endfunction()

managed_components/espressif__tinyusb/hw/bsp/at32f425/boards/at_start_f425/board.h

@@ -0,0 +1,95 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   name: AT-START-F425
+   url: https://www.arterychip.com/en/product/AT32F425.jsp
+*/
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#define USB_VBUS_IGNORE
+
+// LED
+#define LED_PORT              GPIOC
+#define LED_PIN               GPIO_PINS_2
+#define LED_STATE_ON          0 // Active Low
+#define LED_GPIO_CLK_EN()     crm_periph_clock_enable(CRM_GPIOC_PERIPH_CLOCK, TRUE)
+
+// Button
+#define BUTTON_PORT           GPIOA
+#define BUTTON_PIN            GPIO_PINS_0
+#define BUTTON_STATE_ACTIVE   1
+#define BUTTON_GPIO_CLK_EN()  crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE)
+
+// Usart
+#define PRINT_UART                       USART1
+#define PRINT_UART_CRM_CLK               CRM_USART1_PERIPH_CLOCK
+#define PRINT_UART_TX_PIN                GPIO_PINS_9
+#define PRINT_UART_TX_GPIO               GPIOA
+#define PRINT_UART_TX_GPIO_CRM_CLK       CRM_GPIOA_PERIPH_CLOCK
+#define PRINT_UART_TX_PIN_SOURCE         GPIO_PINS_SOURCE9
+#define PRINT_UART_TX_PIN_MUX_NUM        GPIO_MUX_1
+
+//USB
+#define USB_ID                           0
+#define OTG_CLOCK                        CRM_OTGFS1_PERIPH_CLOCK
+#define OTG_IRQ                          OTGFS1_IRQn
+#define OTG_IRQ_HANDLER                  OTGFS1_IRQHandler
+#define OTG_WKUP_IRQ                     OTGFS1_WKUP_IRQn
+#define OTG_WKUP_HANDLER                 OTGFS1_WKUP_IRQHandler
+#define OTG_WKUP_EXINT_LINE              EXINT_LINE_18
+#define OTG_PIN_GPIO                     GPIOA
+#define OTG_PIN_GPIO_CLOCK               CRM_GPIOA_PERIPH_CLOCK
+#define OTG_PIN_DP                       GPIO_PINS_12
+#define OTG_PIN_DP_SOURCE                GPIO_PINS_SOURCE12
+#define OTG_PIN_DM                       GPIO_PINS_11
+#define OTG_PIN_DM_SOURCE                GPIO_PINS_SOURCE11
+#define OTG_PIN_VBUS                     GPIO_PINS_9
+#define OTG_PIN_VBUS_SOURCE              GPIO_PINS_SOURCE9
+#define OTG_PIN_ID                       GPIO_PINS_10
+#define OTG_PIN_ID_SOURCE                GPIO_PINS_SOURCE10
+#define OTG_PIN_SOF_GPIO                 GPIOA
+#define OTG_PIN_SOF_GPIO_CLOCK           CRM_GPIOA_PERIPH_CLOCK
+#define OTG_PIN_SOF                      GPIO_PINS_8
+#define OTG_PIN_SOF_SOURCE               GPIO_PINS_SOURCE8
+#define OTG_PIN_MUX                      GPIO_MUX_3
+
+static inline void board_vbus_sense_init(void)
+{
+    *(int*)(0x50000038) |= (1<<21);
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */

managed_components/espressif__tinyusb/hw/bsp/at32f425/boards/at_start_f425/board.mk

@@ -0,0 +1,9 @@
+MCU_VARIANT = AT32F425R8T7
+MCU_LINKER_NAME = AT32F425x8
+
+JLINK_DEVICE = ${MCU_VARIANT}
+
+CFLAGS += \
+  -D${MCU_VARIANT} \
+  -DCFG_EXAMPLE_VIDEO_READONLY \
+  -DCFG_EXAMPLE_MSC_READONLY

managed_components/espressif__tinyusb/hw/bsp/at32f425/family.c

@@ -0,0 +1,283 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   manufacturer: Artery
+*/
+
+#include "at32f425_clock.h"
+#include "board.h"
+#include "bsp/board_api.h"
+
+void uart_print_init(uint32_t baudrate);
+void usb_clock48m_select(usb_clk48_s clk_s);
+void led_and_button_init(void);
+
+//--------------------------------------------------------------------+
+// Forward USB interrupt events to TinyUSB IRQ Handler
+//--------------------------------------------------------------------+
+void OTGFS1_IRQHandler(void) {
+  tusb_int_handler(0, true);
+}
+void OTGFS1_WKUP_IRQHandler(void) {
+  tusb_int_handler(0, true);
+}
+
+void board_init(void) {
+  /* config nvic priority group */
+  nvic_priority_group_config(NVIC_PRIORITY_GROUP_4);
+
+  /* config system clock */
+  system_clock_config();
+
+  /* enable usb clock */
+  crm_periph_clock_enable(OTG_CLOCK, TRUE);
+
+  /* select usb 48m clcok source */
+  usb_clock48m_select(USB_CLK_HEXT);
+
+  /* vbus ignore */
+  board_vbus_sense_init();
+
+  /* configure systick */
+  systick_clock_source_config(SYSTICK_CLOCK_SOURCE_AHBCLK_NODIV);
+  SysTick_Config(SystemCoreClock / 1000);
+#if CFG_TUSB_OS == OPT_OS_FREERTOS
+  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
+  NVIC_SetPriority(OTG_IRQ, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+#endif
+
+/* otgfs use vbus pin */
+#ifndef USB_VBUS_IGNORE
+  gpio_init_type gpio_init_struct;
+  crm_periph_clock_enable(OTG_PIN_GPIO_CLOCK, TRUE);
+  gpio_default_para_init(&gpio_init_struct);
+  gpio_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_init_struct.gpio_mode = GPIO_MODE_MUX;
+  gpio_init_struct.gpio_pins = OTG_PIN_VBUS;
+  gpio_init_struct.gpio_pull = GPIO_PULL_DOWN;
+  gpio_pin_mux_config(OTG_PIN_GPIO, OTG_PIN_VBUS_SOURCE, OTG_PIN_MUX);
+  gpio_init(OTG_PIN_GPIO, &gpio_init_struct);
+#endif
+
+  /* config led and key */
+  led_and_button_init();
+
+  /* config usart printf */
+  uart_print_init(115200);
+  printf("usart printf config success!\r\n");
+}
+
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+/**
+  * @brief  usb 48M clock select
+  * @param  clk_s:USB_CLK_HICK, USB_CLK_HEXT
+  * @retval none
+  */
+void usb_clock48m_select(usb_clk48_s clk_s) {
+  if (clk_s == USB_CLK_HICK) {
+    crm_usb_clock_source_select(CRM_USB_CLOCK_SOURCE_HICK);
+
+    /* enable the acc calibration ready interrupt */
+    crm_periph_clock_enable(CRM_ACC_PERIPH_CLOCK, TRUE);
+
+    /* update the c1\c2\c3 value */
+    acc_write_c1(7980);
+    acc_write_c2(8000);
+    acc_write_c3(8020);
+
+    /* open acc calibration */
+    acc_calibration_mode_enable(ACC_CAL_HICKTRIM, TRUE);
+  } else {
+    /* usb divider reset */
+    crm_usb_div_reset();
+
+    switch (system_core_clock) {
+      /* 48MHz */
+      case 48000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_1);
+        break;
+
+      /* 72MHz */
+      case 72000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_1_5);
+        break;
+
+      /* 96MHz */
+      case 96000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_2);
+        break;
+
+      default:
+        break;
+    }
+  }
+}
+
+void led_and_button_init(void) {
+  /* LED */
+  gpio_init_type gpio_led_init_struct;
+  /* enable the led clock */
+  LED_GPIO_CLK_EN();
+  /* set default parameter */
+  gpio_default_para_init(&gpio_led_init_struct);
+  /* configure the led gpio */
+  gpio_led_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_led_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_led_init_struct.gpio_mode = GPIO_MODE_OUTPUT;
+  gpio_led_init_struct.gpio_pins = LED_PIN;
+  gpio_led_init_struct.gpio_pull = GPIO_PULL_NONE;
+  gpio_init(LED_PORT, &gpio_led_init_struct);
+  /* Button */
+  gpio_init_type gpio_button_init_struct;
+  /* enable the button clock */
+  BUTTON_GPIO_CLK_EN();
+  /* set default parameter */
+  gpio_default_para_init(&gpio_button_init_struct);
+  /* configure the button gpio */
+  gpio_button_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_button_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_button_init_struct.gpio_mode = GPIO_MODE_INPUT;
+  gpio_button_init_struct.gpio_pins = BUTTON_PIN;
+  gpio_button_init_struct.gpio_pull = GPIO_PULL_DOWN;
+  gpio_init(BUTTON_PORT, &gpio_button_init_struct);
+}
+
+/**
+  * @brief  initialize uart
+  * @param  baudrate: uart baudrate
+  * @retval none
+  */
+void uart_print_init(uint32_t baudrate) {
+  gpio_init_type gpio_init_struct;
+  /* enable the uart and gpio clock */
+  crm_periph_clock_enable(PRINT_UART_CRM_CLK, TRUE);
+  crm_periph_clock_enable(PRINT_UART_TX_GPIO_CRM_CLK, TRUE);
+  gpio_default_para_init(&gpio_init_struct);
+  /* configure the uart tx pin */
+  gpio_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_init_struct.gpio_mode = GPIO_MODE_MUX;
+  gpio_init_struct.gpio_pins = PRINT_UART_TX_PIN;
+  gpio_init_struct.gpio_pull = GPIO_PULL_NONE;
+  gpio_init(PRINT_UART_TX_GPIO, &gpio_init_struct);
+  gpio_pin_mux_config(PRINT_UART_TX_GPIO, PRINT_UART_TX_PIN_SOURCE, PRINT_UART_TX_PIN_MUX_NUM);
+  /* configure uart param */
+  usart_init(PRINT_UART, baudrate, USART_DATA_8BITS, USART_STOP_1_BIT);
+  usart_transmitter_enable(PRINT_UART, TRUE);
+  usart_enable(PRINT_UART, TRUE);
+}
+
+// Get characters from UART. Return number of read bytes
+int board_uart_read(uint8_t *buf, int len) {
+  (void) buf;
+  (void) len;
+  return 0;
+}
+
+// Send characters to UART. Return number of sent bytes
+int board_uart_write(void const *buf, int len) {
+#if CFG_TUSB_OS == OPT_OS_NONE
+  int txsize = len;
+  u16 timeout = 0xffff;
+  while (txsize--) {
+    while (usart_flag_get(PRINT_UART, USART_TDBE_FLAG) == RESET) {
+      timeout--;
+      if (timeout == 0) {
+        return 0;
+      }
+    }
+    PRINT_UART->dt = (*((uint8_t const *) buf) & 0x01FF);
+    buf++;
+  }
+  return len;
+#else
+  (void) buf;
+  (void) len;
+  return 0;
+#endif
+}
+
+void board_led_write(bool state) {
+  gpio_bits_write(LED_PORT, LED_PIN, state ^ (!LED_STATE_ON));
+}
+
+uint32_t board_button_read(void) {
+  return gpio_input_data_bit_read(BUTTON_PORT, BUTTON_PIN);
+}
+
+size_t board_get_unique_id(uint8_t id[], size_t max_len) {
+  (void) max_len;
+  volatile uint32_t *at32_uuid = ((volatile uint32_t *) 0x1FFFF7E8);
+  uint32_t *id32 = (uint32_t *) (uintptr_t) id;
+  uint8_t const len = 12;
+
+  id32[0] = at32_uuid[0];
+  id32[1] = at32_uuid[1];
+  id32[2] = at32_uuid[2];
+
+  return len;
+}
+
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+
+volatile uint32_t system_ticks = 0;
+void SysTick_Handler(void) {
+  system_ticks++;
+}
+
+uint32_t board_millis(void) {
+  return system_ticks;
+}
+
+void SVC_Handler(void) {
+}
+
+void PendSV_Handler(void) {
+}
+#endif
+
+void HardFault_Handler(void) {
+  __asm("BKPT #0\n");
+}
+
+// Required by __libc_init_array in startup code if we are compiling using
+// -nostdlib/-nostartfiles.
+void _init(void) {
+}
+
+#ifdef USE_FULL_ASSERT
+void assert_failed(const char *file, uint32_t line) {
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */

managed_components/espressif__tinyusb/hw/bsp/at32f425/family.cmake

@@ -0,0 +1,108 @@
+include_guard()
+
+set(AT32_FAMILY at32f425)
+set(AT32_SDK_LIB ${TOP}/hw/mcu/artery/${AT32_FAMILY}/libraries)
+
+string(TOUPPER ${AT32_FAMILY} AT32_FAMILY_UPPER)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_CPU cortex-m4-nofpu CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS ${AT32_FAMILY_UPPER} CACHE INTERNAL "")
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (TARGET ${BOARD_TARGET})
+    return()
+  endif ()
+
+  # Startup & Linker script
+  set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s)
+  set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU})
+  set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s)
+
+  if (NOT DEFINED LD_FILE_GNU)
+    set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld)
+  endif ()
+  set(LD_FILE_Clang ${LD_FILE_GNU})
+  set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf)
+
+  add_library(${BOARD_TARGET} STATIC
+    ${AT32_SDK_LIB}/cmsis/cm4/device_support/system_${AT32_FAMILY}.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_gpio.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_misc.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_usart.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_crm.c
+    ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+    )
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${AT32_SDK_LIB}/cmsis/cm4/core_support
+    ${AT32_SDK_LIB}/cmsis/cm4/device_support
+    ${AT32_SDK_LIB}/drivers/inc
+    )
+  update_board(${BOARD_TARGET})
+
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_GNU}"
+      -nostartfiles
+      --specs=nosys.specs --specs=nano.specs
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_Clang}"
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--config=${LD_FILE_IAR}"
+      )
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER})
+  target_sources(${TARGET} PUBLIC
+    ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c
+    ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c
+    ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c
+    )
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD})
+
+  # Flashing
+  family_add_bin_hex(${TARGET})
+  family_flash_jlink(${TARGET})
+endfunction()

managed_components/espressif__tinyusb/hw/bsp/at32f425/family.mk

@@ -0,0 +1,39 @@
+AT32_FAMILY = at32f425
+AT32_SDK_LIB = hw/mcu/artery/${AT32_FAMILY}/libraries
+
+include $(TOP)/$(BOARD_PATH)/board.mk
+
+CPU_CORE ?= cortex-m4-nofpu
+
+CFLAGS_GCC += \
+  -flto
+
+CFLAGS += \
+	-DCFG_TUSB_MCU=OPT_MCU_AT32F425 \
+
+LDFLAGS_GCC += \
+	-flto --specs=nosys.specs -nostdlib -nostartfiles
+
+SRC_C += \
+	src/portable/synopsys/dwc2/dcd_dwc2.c \
+	src/portable/synopsys/dwc2/hcd_dwc2.c \
+	src/portable/synopsys/dwc2/dwc2_common.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_gpio.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_misc.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_usart.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_crm.c \
+	$(AT32_SDK_LIB)/cmsis/cm4/device_support/system_${AT32_FAMILY}.c
+
+INC += \
+	$(TOP)/$(BOARD_PATH) \
+	$(TOP)/$(AT32_SDK_LIB)/drivers/inc \
+	$(TOP)/$(AT32_SDK_LIB)/cmsis/cm4/core_support \
+	$(TOP)/$(AT32_SDK_LIB)/cmsis/cm4/device_support
+
+SRC_S_GCC += ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s
+SRC_S_IAR += ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s
+
+LD_FILE_GCC ?= ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld
+LD_FILE_IAR ?= ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf
+
+flash: flash-atlink

managed_components/espressif__tinyusb/hw/bsp/at32f435_437/FreeRTOSConfig/FreeRTOSConfig.h

@@ -0,0 +1,177 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+// Include MCU header
+  #include "at32f435_437.h"
+
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU								        0
+#define configENABLE_FPU								        1
+#define configENABLE_TRUSTZONE					        0
+#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               4
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         1
+#define configSUPPORT_DYNAMIC_ALLOCATION        0
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+#define configCHECK_HANDLER_INSTALLATION       0
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+#ifdef __RX__
+/* Renesas RX series */
+#define vSoftwareInterruptISR					        INT_Excep_ICU_SWINT
+#define vTickISR								              INT_Excep_CMT0_CMI0
+#define configPERIPHERAL_CLOCK_HZ				      (configCPU_CLOCK_HZ/2)
+#define configKERNEL_INTERRUPT_PRIORITY			  1
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY	4
+
+#else
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+#if defined(__NVIC_PRIO_BITS)
+  // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h
+	#define configPRIO_BITS       __NVIC_PRIO_BITS
+
+#elif defined(__ECLIC_INTCTLBITS)
+  // RISC-V Bumblebee core from nuclei
+  #define configPRIO_BITS       __ECLIC_INTCTLBITS
+
+#elif defined(__IASMARM__)
+  // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS.
+  // Therefore we will hard coded it to minimum value of 2 to get pass ci build.
+  // IAR user must update this to correct value of the target MCU
+  #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU"
+  #define configPRIO_BITS       2
+
+#else
+  #error "FreeRTOS configPRIO_BITS to be defined"
+#endif
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
+
+#endif /* __FREERTOS_CONFIG__H */

managed_components/espressif__tinyusb/hw/bsp/at32f435_437/at32f435_437_clock.c

@@ -0,0 +1,119 @@
+/**
+  **************************************************************************
+  * @file     at32f435_437_clock.c
+  * @brief    system clock config program
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f435_437_clock.h"
+
+/**
+  * @brief  system clock config program
+  * @note   the system clock is configured as follow:
+  *         system clock (sclk)   = (hext * pll_ns)/(pll_ms * pll_fr)
+  *         system clock source   = pll (hext)
+  *         - hext                = HEXT_VALUE
+  *         - sclk                = 288000000
+  *         - ahbdiv              = 1
+  *         - ahbclk              = 288000000
+  *         - apb2div             = 2
+  *         - apb2clk             = 144000000
+  *         - apb1div             = 2
+  *         - apb1clk             = 144000000
+  *         - pll_ns              = 144
+  *         - pll_ms              = 1
+  *         - pll_fr              = 4
+  * @param  none
+  * @retval none
+  */
+void system_clock_config(void)
+{
+  /* reset crm */
+  crm_reset();
+
+  /* enable pwc periph clock */
+  crm_periph_clock_enable(CRM_PWC_PERIPH_CLOCK, TRUE);
+
+  /* config ldo voltage */
+  pwc_ldo_output_voltage_set(PWC_LDO_OUTPUT_1V3);
+
+  /* set the flash clock divider */
+  flash_clock_divider_set(FLASH_CLOCK_DIV_3);
+
+  crm_clock_source_enable(CRM_CLOCK_SOURCE_HEXT, TRUE);
+
+  /* wait till hext is ready */
+  while(crm_hext_stable_wait() == ERROR)
+  {
+  }
+
+  /* config pll clock resource
+  common frequency config list: pll source selected  hick or hext(8mhz)
+  _________________________________________________________________________________________________
+  |        |         |         |         |         |         |         |         |        |        |
+  |pll(mhz)|   288   |   252   |   216   |   192   |   180   |   144   |   108   |   72   |   36   |
+  |________|_________|_________|_________|_________|_________|_________|_________|_________________|
+  |        |         |         |         |         |         |         |         |        |        |
+  |pll_ns  |   144   |   126   |   108   |   96    |   90    |   72    |   108   |   72   |   72   |
+  |        |         |         |         |         |         |         |         |        |        |
+  |pll_ms  |   1     |   1     |   1     |   1     |   1     |   1     |   1     |   1    |   1    |
+  |        |         |         |         |         |         |         |         |        |        |
+  |pll_fr  |   FR_4  |   FR_4  |   FR_4  |   FR_4  |   FR_4  |   FR_4  |   FR_8  |   FR_8 |   FR_16|
+  |________|_________|_________|_________|_________|_________|_________|_________|________|________|
+
+  if pll clock source selects hext with other frequency values, or configure pll to other
+  frequency values, please use the at32 new clock  configuration tool for configuration.  */
+  crm_pll_config(CRM_PLL_SOURCE_HEXT, 144, 1, CRM_PLL_FR_4);
+
+  /* enable pll */
+  crm_clock_source_enable(CRM_CLOCK_SOURCE_PLL, TRUE);
+
+  /* wait till pll is ready */
+  while(crm_flag_get(CRM_PLL_STABLE_FLAG) != SET)
+  {
+  }
+
+  /* config ahbclk */
+  crm_ahb_div_set(CRM_AHB_DIV_1);
+
+  /* config apb2clk, the maximum frequency of APB1/APB2 clock is 144 MHz  */
+  crm_apb2_div_set(CRM_APB2_DIV_2);
+
+  /* config apb1clk, the maximum frequency of APB1/APB2 clock is 144 MHz  */
+  crm_apb1_div_set(CRM_APB1_DIV_2);
+
+  /* enable auto step mode */
+  crm_auto_step_mode_enable(TRUE);
+
+  /* select pll as system clock source */
+  crm_sysclk_switch(CRM_SCLK_PLL);
+
+  /* wait till pll is used as system clock source */
+  while(crm_sysclk_switch_status_get() != CRM_SCLK_PLL)
+  {
+  }
+
+  /* disable auto step mode */
+  crm_auto_step_mode_enable(FALSE);
+
+  /* update system_core_clock global variable */
+  system_core_clock_update();
+}

managed_components/espressif__tinyusb/hw/bsp/at32f435_437/at32f435_437_clock.h

@@ -0,0 +1,43 @@
+/**
+  **************************************************************************
+  * @file     at32f435_437_clock.h
+  * @brief    header file of clock program
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F435_437_CLOCK_H
+#define __AT32F435_437_CLOCK_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f435_437.h"
+
+/* exported functions ------------------------------------------------------- */
+void system_clock_config(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

managed_components/espressif__tinyusb/hw/bsp/at32f435_437/at32f435_437_conf.h

@@ -0,0 +1,173 @@
+/**
+  **************************************************************************
+  * @file     at32f435_437_conf.h
+  * @brief    at32f435_437 config header file
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F435_437_CONF_H
+#define __AT32F435_437_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+  * @brief in the following line adjust the value of high speed external crystal (hext)
+  * used in your application
+  *
+  * tip: to avoid modifying this file each time you need to use different hext, you
+  *      can define the hext value in your toolchain compiler preprocessor.
+  *
+  */
+#if !defined  HEXT_VALUE
+#define HEXT_VALUE                       ((uint32_t)8000000) /*!< value of the high speed external crystal in hz */
+#endif
+
+/**
+  * @brief in the following line adjust the high speed external crystal (hext) startup
+  * timeout value
+  */
+#define HEXT_STARTUP_TIMEOUT             ((uint16_t)0x3000)  /*!< time out for hext start up */
+#define HICK_VALUE                       ((uint32_t)8000000) /*!< value of the high speed internal clock in hz */
+#define LEXT_VALUE                       ((uint32_t)32768)   /*!< value of the low speed external clock in hz */
+
+/* module define -------------------------------------------------------------*/
+#define CRM_MODULE_ENABLED
+#define TMR_MODULE_ENABLED
+#define ERTC_MODULE_ENABLED
+#define GPIO_MODULE_ENABLED
+#define I2C_MODULE_ENABLED
+#define USART_MODULE_ENABLED
+#define PWC_MODULE_ENABLED
+#define CAN_MODULE_ENABLED
+#define ADC_MODULE_ENABLED
+#define DAC_MODULE_ENABLED
+#define SPI_MODULE_ENABLED
+#define EDMA_MODULE_ENABLED
+#define DMA_MODULE_ENABLED
+#define DEBUG_MODULE_ENABLED
+#define FLASH_MODULE_ENABLED
+#define CRC_MODULE_ENABLED
+#define WWDT_MODULE_ENABLED
+#define WDT_MODULE_ENABLED
+#define EXINT_MODULE_ENABLED
+#define SDIO_MODULE_ENABLED
+#define XMC_MODULE_ENABLED
+#define USB_MODULE_ENABLED
+#define ACC_MODULE_ENABLED
+#define MISC_MODULE_ENABLED
+#define QSPI_MODULE_ENABLED
+#define DVP_MODULE_ENABLED
+#define SCFG_MODULE_ENABLED
+#define EMAC_MODULE_ENABLED
+
+/* includes ------------------------------------------------------------------*/
+#ifdef CRM_MODULE_ENABLED
+#include "at32f435_437_crm.h"
+#endif
+#ifdef TMR_MODULE_ENABLED
+#include "at32f435_437_tmr.h"
+#endif
+#ifdef ERTC_MODULE_ENABLED
+#include "at32f435_437_ertc.h"
+#endif
+#ifdef GPIO_MODULE_ENABLED
+#include "at32f435_437_gpio.h"
+#endif
+#ifdef I2C_MODULE_ENABLED
+#include "at32f435_437_i2c.h"
+#endif
+#ifdef USART_MODULE_ENABLED
+#include "at32f435_437_usart.h"
+#endif
+#ifdef PWC_MODULE_ENABLED
+#include "at32f435_437_pwc.h"
+#endif
+#ifdef CAN_MODULE_ENABLED
+#include "at32f435_437_can.h"
+#endif
+#ifdef ADC_MODULE_ENABLED
+#include "at32f435_437_adc.h"
+#endif
+#ifdef DAC_MODULE_ENABLED
+#include "at32f435_437_dac.h"
+#endif
+#ifdef SPI_MODULE_ENABLED
+#include "at32f435_437_spi.h"
+#endif
+#ifdef DMA_MODULE_ENABLED
+#include "at32f435_437_dma.h"
+#endif
+#ifdef DEBUG_MODULE_ENABLED
+#include "at32f435_437_debug.h"
+#endif
+#ifdef FLASH_MODULE_ENABLED
+#include "at32f435_437_flash.h"
+#endif
+#ifdef CRC_MODULE_ENABLED
+#include "at32f435_437_crc.h"
+#endif
+#ifdef WWDT_MODULE_ENABLED
+#include "at32f435_437_wwdt.h"
+#endif
+#ifdef WDT_MODULE_ENABLED
+#include "at32f435_437_wdt.h"
+#endif
+#ifdef EXINT_MODULE_ENABLED
+#include "at32f435_437_exint.h"
+#endif
+#ifdef SDIO_MODULE_ENABLED
+#include "at32f435_437_sdio.h"
+#endif
+#ifdef XMC_MODULE_ENABLED
+#include "at32f435_437_xmc.h"
+#endif
+#ifdef ACC_MODULE_ENABLED
+#include "at32f435_437_acc.h"
+#endif
+#ifdef MISC_MODULE_ENABLED
+#include "at32f435_437_misc.h"
+#endif
+#ifdef EDMA_MODULE_ENABLED
+#include "at32f435_437_edma.h"
+#endif
+#ifdef QSPI_MODULE_ENABLED
+#include "at32f435_437_qspi.h"
+#endif
+#ifdef SCFG_MODULE_ENABLED
+#include "at32f435_437_scfg.h"
+#endif
+#ifdef EMAC_MODULE_ENABLED
+#include "at32f435_437_emac.h"
+#endif
+#ifdef DVP_MODULE_ENABLED
+#include "at32f435_437_dvp.h"
+#endif
+#ifdef USB_MODULE_ENABLED
+#include "at32f435_437_usb.h"
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

managed_components/espressif__tinyusb/hw/bsp/at32f435_437/at32f435_437_int.c

@@ -0,0 +1,119 @@
+/**
+  **************************************************************************
+  * @file     at32f435_437_int.c
+  * @brief    main interrupt service routines.
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f435_437_int.h"
+
+/** @addtogroup AT32F437_periph_examples
+  * @{
+  */
+
+/** @addtogroup 437_USB_device_msc
+  * @{
+  */
+
+/**
+  * @brief  this function handles nmi exception.
+  * @param  none
+  * @retval none
+  */
+void NMI_Handler(void)
+{
+}
+
+
+/**
+  * @brief  this function handles memory manage exception.
+  * @param  none
+  * @retval none
+  */
+void MemManage_Handler(void)
+{
+  /* go to infinite loop when memory manage exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles bus fault exception.
+  * @param  none
+  * @retval none
+  */
+void BusFault_Handler(void)
+{
+  /* go to infinite loop when bus fault exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles usage fault exception.
+  * @param  none
+  * @retval none
+  */
+void UsageFault_Handler(void)
+{
+  /* go to infinite loop when usage fault exception occurs */
+  while(1)
+  {
+  }
+}
+
+/**
+  * @brief  this function handles svcall exception.
+  * @param  none
+  * @retval none
+  */
+//void SVC_Handler(void)
+//{
+//}
+
+/**
+  * @brief  this function handles debug monitor exception.
+  * @param  none
+  * @retval none
+  */
+void DebugMon_Handler(void)
+{
+}
+
+/**
+  * @brief  this function handles pendsv_handler exception.
+  * @param  none
+  * @retval none
+  */
+//void PendSV_Handler(void)
+//{
+//}
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

managed_components/espressif__tinyusb/hw/bsp/at32f435_437/at32f435_437_int.h

@@ -0,0 +1,55 @@
+/**
+  **************************************************************************
+  * @file     at32f435_437_int.h
+  * @brief    header file of main interrupt service routines.
+  **************************************************************************
+  *                       Copyright notice & Disclaimer
+  *
+  * The software Board Support Package (BSP) that is made available to
+  * download from Artery official website is the copyrighted work of Artery.
+  * Artery authorizes customers to use, copy, and distribute the BSP
+  * software and its related documentation for the purpose of design and
+  * development in conjunction with Artery microcontrollers. Use of the
+  * software is governed by this copyright notice and the following disclaimer.
+  *
+  * THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
+  * GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
+  * TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
+  * STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
+  * INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
+  *
+  **************************************************************************
+  */
+
+/* define to prevent recursive inclusion -------------------------------------*/
+#ifndef __AT32F435_437_INT_H
+#define __AT32F435_437_INT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* includes ------------------------------------------------------------------*/
+#include "at32f435_437.h"
+
+/* exported types ------------------------------------------------------------*/
+/* exported constants --------------------------------------------------------*/
+/* exported macro ------------------------------------------------------------*/
+/* exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

managed_components/espressif__tinyusb/hw/bsp/at32f435_437/boards/at_start_f435/board.cmake

@@ -0,0 +1,8 @@
+set(MCU_VARIANT AT32F435ZMT7)
+set(MCU_LINKER_NAME AT32F435xM)
+
+set(JLINK_DEVICE ${MCU_VARIANT})
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC ${MCU_VARIANT})
+endfunction()

managed_components/espressif__tinyusb/hw/bsp/at32f435_437/boards/at_start_f435/board.h

@@ -0,0 +1,74 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   name: AT-START-F435
+   url: https://www.arterychip.com/en/product/AT32F435.jsp
+*/
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//#define USB_VBUS_IGNORE
+//#define USB_SOF_OUTPUT_ENABLE
+
+// LED
+#define LED_PORT              GPIOD
+#define LED_PIN               GPIO_PINS_13
+#define LED_STATE_ON          0 // Active Low
+#define LED_GPIO_CLK_EN()     crm_periph_clock_enable(CRM_GPIOD_PERIPH_CLOCK, TRUE)
+
+// Button
+#define BUTTON_PORT           GPIOA
+#define BUTTON_PIN            GPIO_PINS_0
+#define BUTTON_STATE_ACTIVE   1
+#define BUTTON_GPIO_CLK_EN()  crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE)
+
+// USART
+#define PRINT_UART                       USART1
+#define PRINT_UART_CRM_CLK               CRM_USART1_PERIPH_CLOCK
+#define PRINT_UART_TX_PIN                GPIO_PINS_9
+#define PRINT_UART_TX_GPIO               GPIOA
+#define PRINT_UART_TX_GPIO_CRM_CLK       CRM_GPIOA_PERIPH_CLOCK
+#define PRINT_UART_TX_PIN_SOURCE         GPIO_PINS_SOURCE9
+#define PRINT_UART_TX_PIN_MUX_NUM        GPIO_MUX_7
+
+// VBUS
+static inline void board_vbus_sense_init(void)
+{
+    *(int*)(0x50000038) |= (1<<21);
+    *(int*)(0x40040038) |= (1<<21);
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */

managed_components/espressif__tinyusb/hw/bsp/at32f435_437/boards/at_start_f435/board.mk

@@ -0,0 +1,7 @@
+MCU_VARIANT = AT32F435ZMT7
+MCU_LINKER_NAME = AT32F435xM
+
+JLINK_DEVICE = ${MCU_VARIANT}
+
+CFLAGS += \
+  -D${MCU_VARIANT}

managed_components/espressif__tinyusb/hw/bsp/at32f435_437/boards/at_start_f437/board.cmake

@@ -0,0 +1,8 @@
+set(MCU_VARIANT AT32F437ZMT7)
+set(MCU_LINKER_NAME AT32F437xM)
+
+set(JLINK_DEVICE ${MCU_VARIANT})
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC ${MCU_VARIANT})
+endfunction()

managed_components/espressif__tinyusb/hw/bsp/at32f435_437/boards/at_start_f437/board.h

@@ -0,0 +1,74 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   name: AT-START-F437
+   url: https://www.arterychip.com/en/product/AT32F437.jsp
+*/
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//#define USB_VBUS_IGNORE
+//#define USB_SOF_OUTPUT_ENABLE
+
+// LED
+#define LED_PORT              GPIOD
+#define LED_PIN               GPIO_PINS_13
+#define LED_STATE_ON          0 // Active Low
+#define LED_GPIO_CLK_EN()     crm_periph_clock_enable(CRM_GPIOD_PERIPH_CLOCK, TRUE)
+
+// Button
+#define BUTTON_PORT           GPIOA
+#define BUTTON_PIN            GPIO_PINS_0
+#define BUTTON_STATE_ACTIVE   1
+#define BUTTON_GPIO_CLK_EN()  crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE)
+
+// USART
+#define PRINT_UART                       USART1
+#define PRINT_UART_CRM_CLK               CRM_USART1_PERIPH_CLOCK
+#define PRINT_UART_TX_PIN                GPIO_PINS_9
+#define PRINT_UART_TX_GPIO               GPIOA
+#define PRINT_UART_TX_GPIO_CRM_CLK       CRM_GPIOA_PERIPH_CLOCK
+#define PRINT_UART_TX_PIN_SOURCE         GPIO_PINS_SOURCE9
+#define PRINT_UART_TX_PIN_MUX_NUM        GPIO_MUX_7
+
+// VBUS
+static inline void board_vbus_sense_init(void)
+{
+    *(int*)(0x50000038) |= (1<<21);
+    *(int*)(0x40040038) |= (1<<21);
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */

managed_components/espressif__tinyusb/hw/bsp/at32f435_437/boards/at_start_f437/board.mk

@@ -0,0 +1,7 @@
+MCU_VARIANT = AT32F437ZMT7
+MCU_LINKER_NAME = AT32F437xM
+
+JLINK_DEVICE = ${MCU_VARIANT}
+
+CFLAGS += \
+  -D${MCU_VARIANT}

managed_components/espressif__tinyusb/hw/bsp/at32f435_437/family.c

@@ -0,0 +1,345 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   manufacturer: Artery
+*/
+
+#include "at32f435_437_clock.h"
+#include "board.h"
+#include "bsp/board_api.h"
+
+void usb_gpio_config(void);
+void uart_print_init(uint32_t baudrate);
+void usb_clock48m_select(usb_clk48_s clk_s);
+void led_and_botton_init(void);
+int inHandlerMode(void);
+//--------------------------------------------------------------------+
+// Forward USB interrupt events to TinyUSB IRQ Handler
+//--------------------------------------------------------------------+
+void OTGFS1_IRQHandler(void) {
+  tusb_int_handler(0, true);
+}
+void OTGFS2_IRQHandler(void) {
+  tusb_int_handler(1, true);
+}
+void OTGFS1_WKUP_IRQHandler(void) {
+  tusb_int_handler(0, true);
+}
+void OTGFS2_WKUP_IRQHandler(void) {
+  tusb_int_handler(1, true);
+}
+
+void board_init(void) {
+  /* config nvic priority group */
+  nvic_priority_group_config(NVIC_PRIORITY_GROUP_4);
+
+  /* config system clock to 288Mhz */
+  system_clock_config();
+
+  /* config usb io */
+  usb_gpio_config();
+
+  /* enable usb clock */
+  crm_periph_clock_enable(CRM_OTGFS1_PERIPH_CLOCK, TRUE);
+  crm_periph_clock_enable(CRM_OTGFS2_PERIPH_CLOCK, TRUE);
+
+  /* select usb 48m clcok source */
+  usb_clock48m_select(USB_CLK_HEXT);
+
+  /* vbus ignore */
+  board_vbus_sense_init();
+
+  SysTick_Config(SystemCoreClock / 1000);
+#if CFG_TUSB_OS == OPT_OS_FREERTOS
+  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
+  NVIC_SetPriority(OTGFS1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+  NVIC_SetPriority(OTGFS2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+#else
+  NVIC_SetPriority(OTGFS1_IRQn, 0);
+  NVIC_SetPriority(OTGFS2_IRQn, 0);
+#endif
+
+  /* config led and key */
+  led_and_botton_init();
+
+  /* config usart printf */
+  uart_print_init(115200);
+}
+
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+/**
+  * @brief  usb 48M clock select
+  * @param  clk_s:USB_CLK_HICK, USB_CLK_HEXT
+  * @retval none
+  */
+void usb_clock48m_select(usb_clk48_s clk_s) {
+  if (clk_s == USB_CLK_HICK) {
+    crm_usb_clock_source_select(CRM_USB_CLOCK_SOURCE_HICK);
+
+    /* enable the acc calibration ready interrupt */
+    crm_periph_clock_enable(CRM_ACC_PERIPH_CLOCK, TRUE);
+
+    /* update the c1\c2\c3 value */
+    acc_write_c1(7980);
+    acc_write_c2(8000);
+    acc_write_c3(8020);
+#ifdef BOARD_TUD_RHPORT
+  #if BOARD_TUD_RHPORT == 0
+    acc_sof_select(ACC_SOF_OTG1);
+  #else
+    acc_sof_select(ACC_SOF_OTG2);
+  #endif
+#endif
+    /* open acc calibration */
+    acc_calibration_mode_enable(ACC_CAL_HICKTRIM, TRUE);
+  } else {
+    switch (system_core_clock) {
+      /* 48MHz */
+      case 48000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_1);
+        break;
+
+      /* 72MHz */
+      case 72000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_1_5);
+        break;
+
+      /* 96MHz */
+      case 96000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_2);
+        break;
+
+      /* 120MHz */
+      case 120000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_2_5);
+        break;
+
+      /* 144MHz */
+      case 144000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_3);
+        break;
+
+      /* 168MHz */
+      case 168000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_3_5);
+        break;
+
+      /* 192MHz */
+      case 192000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_4);
+        break;
+
+      /* 216MHz */
+      case 216000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_4_5);
+        break;
+
+      /* 240MHz */
+      case 240000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_5);
+        break;
+
+      /* 264MHz */
+      case 264000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_5_5);
+        break;
+
+      /* 288MHz */
+      case 288000000:
+        crm_usb_clock_div_set(CRM_USB_DIV_6);
+        break;
+
+      default:
+        break;
+    }
+  }
+}
+
+void led_and_botton_init(void) {
+  /* LED */
+  gpio_init_type gpio_led_init_struct;
+  /* enable the led clock */
+  LED_GPIO_CLK_EN();
+  /* set default parameter */
+  gpio_default_para_init(&gpio_led_init_struct);
+  /* configure the led gpio */
+  gpio_led_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_led_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_led_init_struct.gpio_mode = GPIO_MODE_OUTPUT;
+  gpio_led_init_struct.gpio_pins = LED_PIN;
+  gpio_led_init_struct.gpio_pull = GPIO_PULL_NONE;
+  gpio_init(LED_PORT, &gpio_led_init_struct);
+  gpio_bits_set(LED_PORT, LED_PIN);
+  gpio_bits_set(LED_PORT, GPIO_PINS_14);
+  gpio_bits_set(LED_PORT, GPIO_PINS_15);
+  /* Button */
+  gpio_init_type gpio_button_init_struct;
+  /* enable the button clock */
+  BUTTON_GPIO_CLK_EN();
+  /* set default parameter */
+  gpio_default_para_init(&gpio_button_init_struct);
+  /* configure the button gpio */
+  gpio_button_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_button_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_button_init_struct.gpio_mode = GPIO_MODE_INPUT;
+  gpio_button_init_struct.gpio_pins = BUTTON_PIN;
+  gpio_button_init_struct.gpio_pull = GPIO_PULL_DOWN;
+  gpio_init(BUTTON_PORT, &gpio_button_init_struct);
+}
+
+/**
+  * @brief  initialize uart
+  * @param  baudrate: uart baudrate
+  * @retval none
+  */
+void uart_print_init(uint32_t baudrate) {
+  gpio_init_type gpio_init_struct;
+  /* enable the uart and gpio clock */
+  crm_periph_clock_enable(PRINT_UART_CRM_CLK, TRUE);
+  crm_periph_clock_enable(PRINT_UART_TX_GPIO_CRM_CLK, TRUE);
+  gpio_default_para_init(&gpio_init_struct);
+  /* configure the uart tx pin */
+  gpio_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_init_struct.gpio_mode = GPIO_MODE_MUX;
+  gpio_init_struct.gpio_pins = PRINT_UART_TX_PIN;
+  gpio_init_struct.gpio_pull = GPIO_PULL_NONE;
+  gpio_init(PRINT_UART_TX_GPIO, &gpio_init_struct);
+  gpio_pin_mux_config(PRINT_UART_TX_GPIO, PRINT_UART_TX_PIN_SOURCE, PRINT_UART_TX_PIN_MUX_NUM);
+  /* configure uart param */
+  usart_init(PRINT_UART, baudrate, USART_DATA_8BITS, USART_STOP_1_BIT);
+  usart_transmitter_enable(PRINT_UART, TRUE);
+  usart_enable(PRINT_UART, TRUE);
+}
+
+// Get characters from UART. Return number of read bytes
+int board_uart_read(uint8_t *buf, int len) {
+  (void) buf;
+  (void) len;
+  return 0;
+}
+// Send characters to UART. Return number of sent bytes
+int board_uart_write(void const *buf, int len) {
+#if CFG_TUSB_OS == OPT_OS_NONE
+  int txsize = len;
+  u16 timeout = 0xffff;
+  while (txsize--) {
+    while (usart_flag_get(PRINT_UART, USART_TDBE_FLAG) == RESET) {
+      timeout--;
+      if (timeout == 0) {
+        return 0;
+      }
+    }
+    PRINT_UART->dt = (*((uint8_t const *) buf) & 0x01FF);
+    buf++;
+  }
+  return len;
+#else
+  (void) buf;
+  (void) len;
+  return 0;
+#endif
+}
+
+int inHandlerMode(void) {
+  return __get_IPSR();
+}
+
+void usb_gpio_config(void) {
+  gpio_init_type gpio_init_struct;
+  crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE);
+  crm_periph_clock_enable(CRM_GPIOB_PERIPH_CLOCK, TRUE);
+  gpio_default_para_init(&gpio_init_struct);
+  gpio_init_struct.gpio_drive_strength = GPIO_DRIVE_STRENGTH_STRONGER;
+  gpio_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
+  gpio_init_struct.gpio_mode = GPIO_MODE_MUX;
+  gpio_init_struct.gpio_pull = GPIO_PULL_NONE;
+  /* dp and dm */
+  gpio_init_struct.gpio_pins = GPIO_PINS_11 | GPIO_PINS_12;
+  gpio_init(GPIOA, &gpio_init_struct);
+  gpio_init_struct.gpio_pins = GPIO_PINS_14 | GPIO_PINS_15;
+  gpio_init(GPIOB, &gpio_init_struct);
+  gpio_pin_mux_config(GPIOA, GPIO_PINS_SOURCE11, GPIO_MUX_10);
+  gpio_pin_mux_config(GPIOA, GPIO_PINS_SOURCE12, GPIO_MUX_10);
+  gpio_pin_mux_config(GPIOB, GPIO_PINS_SOURCE14, GPIO_MUX_12);
+  gpio_pin_mux_config(GPIOB, GPIO_PINS_SOURCE15, GPIO_MUX_12);
+}
+
+void board_led_write(bool state) {
+  gpio_bits_write(LED_PORT, LED_PIN, state ^ (!LED_STATE_ON));
+}
+
+uint32_t board_button_read(void) {
+  return gpio_input_data_bit_read(BUTTON_PORT, BUTTON_PIN);
+}
+
+size_t board_get_unique_id(uint8_t id[], size_t max_len) {
+  (void) max_len;
+  volatile uint32_t *at32_uuid = ((volatile uint32_t *) 0x1FFFF7E8);
+  uint32_t *id32 = (uint32_t *) (uintptr_t) id;
+  uint8_t const len = 12;
+
+  id32[0] = at32_uuid[0];
+  id32[1] = at32_uuid[1];
+  id32[2] = at32_uuid[2];
+
+  return len;
+}
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+volatile uint32_t system_ticks = 0;
+void SysTick_Handler(void) {
+  system_ticks++;
+}
+uint32_t board_millis(void) {
+  return system_ticks;
+}
+void SVC_Handler(void) {
+}
+void PendSV_Handler(void) {
+}
+#endif
+
+void HardFault_Handler(void) {
+  __asm("BKPT #0\n");
+}
+
+// Required by __libc_init_array in startup code if we are compiling using
+// -nostdlib/-nostartfiles.
+void _init(void) {
+}
+
+#ifdef USE_FULL_ASSERT
+void assert_failed(const char *file, uint32_t line) {
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */

managed_components/espressif__tinyusb/hw/bsp/at32f435_437/family.cmake

@@ -0,0 +1,117 @@
+include_guard()
+
+set(AT32_FAMILY at32f435_437)
+set(AT32_SDK_LIB ${TOP}/hw/mcu/artery/${AT32_FAMILY}/libraries)
+
+string(TOUPPER ${AT32_FAMILY} AT32_FAMILY_UPPER)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS ${AT32_FAMILY_UPPER} CACHE INTERNAL "")
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (TARGET ${BOARD_TARGET})
+    return()
+  endif ()
+
+  # Startup & Linker script
+  set(STARTUP_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s)
+  set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU})
+  set(STARTUP_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s)
+
+  if (NOT DEFINED LD_FILE_GNU)
+    set(LD_FILE_GNU ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld)
+  endif ()
+  set(LD_FILE_Clang ${LD_FILE_GNU})
+  set(LD_FILE_IAR ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf)
+
+  add_library(${BOARD_TARGET} STATIC
+    ${AT32_SDK_LIB}/cmsis/cm4/device_support/system_${AT32_FAMILY}.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_gpio.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_misc.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_usart.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_acc.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_crm.c
+    ${AT32_SDK_LIB}/drivers/src/${AT32_FAMILY}_exint.c
+    ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+    )
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${AT32_SDK_LIB}/cmsis/cm4/core_support
+    ${AT32_SDK_LIB}/cmsis/cm4/device_support
+    ${AT32_SDK_LIB}/drivers/inc
+    )
+  target_compile_definitions(${BOARD_TARGET} PUBLIC
+    BOARD_TUD_RHPORT=1
+    BOARD_TUH_RHPORT=0
+    BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED
+    BOARD_TUH_MAX_SPEED=OPT_MODE_FULL_SPEED
+    )
+
+  update_board(${BOARD_TARGET})
+
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_GNU}"
+      -nostartfiles
+      --specs=nosys.specs --specs=nano.specs
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_Clang}"
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--config=${LD_FILE_IAR}"
+      )
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_${AT32_FAMILY_UPPER})
+  target_sources(${TARGET} PUBLIC
+    ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c
+    ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c
+    ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c
+    )
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD})
+
+  # Flashing
+  family_add_bin_hex(${TARGET})
+  family_flash_jlink(${TARGET})
+endfunction()

managed_components/espressif__tinyusb/hw/bsp/at32f435_437/family.mk

@@ -0,0 +1,45 @@
+AT32_FAMILY = at32f435_437
+AT32_SDK_LIB = hw/mcu/artery/${AT32_FAMILY}/libraries
+
+include $(TOP)/$(BOARD_PATH)/board.mk
+
+CPU_CORE ?= cortex-m4
+
+CFLAGS_GCC += \
+  -flto
+
+CFLAGS += \
+	-DCFG_TUSB_MCU=OPT_MCU_AT32F435_437 \
+	-DBOARD_TUD_RHPORT=1 \
+	-DBOARD_TUH_RHPORT=0 \
+	-DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED \
+	-DBOARD_TUH_MAX_SPEED=OPT_MODE_FULL_SPEED \
+
+LDFLAGS_GCC += \
+	-flto --specs=nosys.specs -nostdlib -nostartfiles
+
+SRC_C += \
+	src/portable/synopsys/dwc2/dcd_dwc2.c \
+	src/portable/synopsys/dwc2/hcd_dwc2.c \
+	src/portable/synopsys/dwc2/dwc2_common.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_gpio.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_misc.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_usart.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_crm.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_acc.c \
+	$(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_exint.c \
+	$(AT32_SDK_LIB)/cmsis/cm4/device_support/system_${AT32_FAMILY}.c
+
+INC += \
+	$(TOP)/$(BOARD_PATH) \
+	$(TOP)/$(AT32_SDK_LIB)/drivers/inc \
+	$(TOP)/$(AT32_SDK_LIB)/cmsis/cm4/core_support \
+	$(TOP)/$(AT32_SDK_LIB)/cmsis/cm4/device_support
+
+SRC_S_GCC += ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/startup_${AT32_FAMILY}.s
+SRC_S_IAR += ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/startup_${AT32_FAMILY}.s
+
+LD_FILE_GCC ?= ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/gcc/linker/${MCU_LINKER_NAME}_FLASH.ld
+LD_FILE_IAR ?= ${AT32_SDK_LIB}/cmsis/cm4/device_support/startup/iar/linker/${MCU_LINKER_NAME}.icf
+
+flash: flash-atlink

managed_components/espressif__tinyusb/hw/bsp/board.c

@@ -0,0 +1,264 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018, hathach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "board_api.h"
+
+//--------------------------------------------------------------------+
+// newlib read()/write() retarget
+//--------------------------------------------------------------------+
+#ifdef __ICCARM__
+  #define sys_write   __write
+  #define sys_read    __read
+#elif defined(__MSP430__) || defined(__RX__)
+  #define sys_write   write
+  #define sys_read    read
+#else
+  #define sys_write   _write
+  #define sys_read    _read
+#endif
+
+int sys_write(int fhdl, const char *buf, size_t count) TU_ATTR_USED;
+int sys_read(int fhdl, char *buf, size_t count) TU_ATTR_USED;
+
+#if defined(LOGGER_RTT)
+// Logging with RTT
+
+// If using SES IDE, use the Syscalls/SEGGER_RTT_Syscalls_SES.c instead
+#if !(defined __SES_ARM) && !(defined __SES_RISCV) && !(defined __CROSSWORKS_ARM)
+#include "SEGGER_RTT.h"
+
+int sys_write(int fhdl, const char *buf, size_t count) {
+  (void) fhdl;
+  SEGGER_RTT_Write(0, (const char *) buf, (int) count);
+  return (int) count;
+}
+
+int sys_read(int fhdl, char *buf, size_t count) {
+  (void) fhdl;
+  int rd = (int) SEGGER_RTT_Read(0, buf, count);
+  return (rd > 0) ? rd : -1;
+}
+#endif
+
+#elif defined(LOGGER_SWO)
+
+#define ITM_BASE 0xE0000000
+#define ITM_STIM0 (*((volatile uint8_t*)(ITM_BASE + 0)))
+#define ITM_TER *((volatile uint32_t*)(ITM_BASE + 0xE00))
+#define ITM_TCR *((volatile uint32_t*)(ITM_BASE + 0xE80))
+
+#define ITM_TCR_ITMENA (1 << 0)
+
+// Logging with SWO for ARM Cortex-M
+int sys_write (int fhdl, const char *buf, size_t count) {
+  (void) fhdl;
+  uint8_t const* buf8 = (uint8_t const*) buf;
+
+  if ((ITM_TCR & ITM_TCR_ITMENA) && (ITM_TER & 1ul)) {
+    for(size_t i=0; i < count; i++) {
+      while (!(ITM_STIM0 & 1ul)) {
+        asm("nop");
+      }
+      ITM_STIM0 = buf8[i];
+    }
+  }
+
+  return (int) count;
+}
+
+int sys_read (int fhdl, char *buf, size_t count) {
+  (void) fhdl;
+  (void) buf;
+  (void) count;
+  return 0;
+}
+
+#else
+
+// Default logging with on-board UART
+int sys_write (int fhdl, const char *buf, size_t count) {
+  (void) fhdl;
+  return board_uart_write(buf, (int) count);
+}
+
+int sys_read (int fhdl, char *buf, size_t count) {
+  (void) fhdl;
+  int rd = board_uart_read((uint8_t*) buf, (int) count);
+  return (rd > 0) ? rd : -1;
+}
+
+#endif
+
+//int _close(int fhdl) {
+//  (void) fhdl;
+//  return 0;
+//}
+
+//int _fstat(int file, struct stat *st) {
+//  memset(st, 0, sizeof(*st));
+//  st->st_mode = S_IFCHR;
+//}
+
+// Clang use picolibc
+#if defined(__clang__)
+static int cl_putc(char c, FILE *f) {
+  (void) f;
+  return sys_write(0, &c, 1);
+}
+
+static int cl_getc(FILE* f) {
+  (void) f;
+  char c;
+  return sys_read(0, &c, 1) > 0 ? c : -1;
+}
+
+static FILE __stdio = FDEV_SETUP_STREAM(cl_putc, cl_getc, NULL, _FDEV_SETUP_RW);
+FILE *const stdin = &__stdio;
+__strong_reference(stdin, stdout);
+__strong_reference(stdin, stderr);
+#endif
+
+//--------------------------------------------------------------------+
+// Weak board API (to be optionally implemented by board)
+//--------------------------------------------------------------------+
+TU_ATTR_WEAK size_t board_get_unique_id(uint8_t id[], size_t max_len) {
+  (void) max_len;
+  // fixed serial string is 01234567889ABCDEF
+  uint32_t* uid32 = (uint32_t*) (uintptr_t)id;
+  uid32[0] = 0x67452301;
+  uid32[1] = 0xEFCDAB89;
+  return 8;
+}
+
+TU_ATTR_WEAK void board_init_after_tusb(void) {
+  // nothing to do
+}
+
+TU_ATTR_WEAK void board_reset_to_bootloader(void) {
+  // not implemented
+}
+
+//--------------------------------------------------------------------+
+// Board API
+//--------------------------------------------------------------------+
+int board_getchar(void) {
+  char c;
+  return (sys_read(0, &c, 1) > 0) ? (int) c : (-1);
+}
+
+void board_putchar(int c) {
+  sys_write(0, (const char*)&c, 1);
+}
+
+uint32_t tusb_time_millis_api(void) {
+  return board_millis();
+}
+
+//--------------------------------------------------------------------
+// FreeRTOS hooks
+//--------------------------------------------------------------------
+#if CFG_TUSB_OS == OPT_OS_FREERTOS && !defined(ESP_PLATFORM)
+#include "FreeRTOS.h"
+#include "task.h"
+
+void vApplicationMallocFailedHook(void) {
+  taskDISABLE_INTERRUPTS();
+  TU_ASSERT(false, );
+}
+
+void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName) {
+  (void) pxTask;
+  (void) pcTaskName;
+
+  taskDISABLE_INTERRUPTS();
+  TU_ASSERT(false, );
+}
+
+/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an
+ * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is
+ * used by the Idle task. */
+void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize ) {
+  /* If the buffers to be provided to the Idle task are declared inside this
+   * function then they must be declared static - otherwise they will be allocated on
+   * the stack and so not exists after this function exits. */
+  static StaticTask_t xIdleTaskTCB;
+  static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ];
+
+  /* Pass out a pointer to the StaticTask_t structure in which the Idle task's
+    state will be stored. */
+  *ppxIdleTaskTCBBuffer = &xIdleTaskTCB;
+
+  /* Pass out the array that will be used as the Idle task's stack. */
+  *ppxIdleTaskStackBuffer = uxIdleTaskStack;
+
+  /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer.
+    Note that, as the array is necessarily of type StackType_t,
+    configMINIMAL_STACK_SIZE is specified in words, not bytes. */
+  *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE;
+}
+
+/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the
+ * application must provide an implementation of vApplicationGetTimerTaskMemory()
+ * to provide the memory that is used by the Timer service task. */
+void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize ) {
+  /* If the buffers to be provided to the Timer task are declared inside this
+   * function then they must be declared static - otherwise they will be allocated on
+   * the stack and so not exists after this function exits. */
+  static StaticTask_t xTimerTaskTCB;
+  static StackType_t uxTimerTaskStack[ configTIMER_TASK_STACK_DEPTH ];
+
+  /* Pass out a pointer to the StaticTask_t structure in which the Timer
+    task's state will be stored. */
+  *ppxTimerTaskTCBBuffer = &xTimerTaskTCB;
+
+  /* Pass out the array that will be used as the Timer task's stack. */
+  *ppxTimerTaskStackBuffer = uxTimerTaskStack;
+
+  /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer.
+    Note that, as the array is necessarily of type StackType_t,
+    configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */
+  *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH;
+}
+
+#if CFG_TUSB_MCU == OPT_MCU_RX63X || CFG_TUSB_MCU == OPT_MCU_RX65X
+#include "iodefine.h"
+void vApplicationSetupTimerInterrupt(void) {
+  /* Enable CMT0 */
+  unsigned short oldPRCR = SYSTEM.PRCR.WORD;
+  SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1);
+  MSTP(CMT0)       = 0;
+  SYSTEM.PRCR.WORD = (0xA5u<<8) | oldPRCR;
+
+  CMT0.CMCNT      = 0;
+  CMT0.CMCOR      = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128);
+  CMT0.CMCR.WORD  = TU_BIT(6) | 2;
+  IR(CMT0, CMI0)  = 0;
+  IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY;
+  IEN(CMT0, CMI0) = 1;
+  CMT.CMSTR0.BIT.STR0 = 1;
+}
+#endif
+
+#endif

managed_components/espressif__tinyusb/hw/bsp/board_api.h

@@ -0,0 +1,196 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_API_H_
+#define BOARD_API_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <inttypes.h>
+#include <stdbool.h>
+#include <string.h>
+
+#include "tusb.h"
+
+#if CFG_TUSB_OS == OPT_OS_ZEPHYR
+  #include <zephyr/kernel.h>
+#elif CFG_TUSB_OS == OPT_OS_FREERTOS
+  #ifdef ESP_PLATFORM
+    // ESP-IDF need "freertos/" prefix in include path.
+    // CFG_TUSB_OS_INC_PATH should be defined accordingly.
+    #include "freertos/FreeRTOS.h"
+    #include "freertos/semphr.h"
+    #include "freertos/queue.h"
+    #include "freertos/task.h"
+    #include "freertos/timers.h"
+  #else
+    #include "FreeRTOS.h"
+    #include "semphr.h"
+    #include "queue.h"
+    #include "task.h"
+    #include "timers.h"
+  #endif
+#endif
+
+// Define the default baudrate
+#ifndef CFG_BOARD_UART_BAUDRATE
+#define CFG_BOARD_UART_BAUDRATE 115200   ///< Default baud rate
+#endif
+
+//--------------------------------------------------------------------+
+// Board Porting API
+// For simplicity, only one LED and one Button are used
+//--------------------------------------------------------------------+
+
+// Initialize on-board peripherals : led, button, uart and USB
+void board_init(void);
+
+// Init board after tinyusb is initialized
+void board_init_after_tusb(void);
+
+// Jump to bootloader
+void board_reset_to_bootloader(void);
+
+// Turn LED on or off
+void board_led_write(bool state);
+
+// Control led pattern using phase duration in ms.
+// For each phase, LED is toggle then repeated, board_led_task() is required to be called
+//void board_led_pattern(uint32_t const phase_ms[], uint8_t count);
+
+// Get the current state of button
+// a '1' means active (pressed), a '0' means inactive.
+uint32_t board_button_read(void);
+
+// Get board unique ID for USB serial number. Return number of bytes. Note max_len is typically 16
+size_t board_get_unique_id(uint8_t id[], size_t max_len);
+
+// Get characters from UART. Return number of read bytes
+int board_uart_read(uint8_t *buf, int len);
+
+// Send characters to UART. Return number of sent bytes
+int board_uart_write(void const *buf, int len);
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+// Get current milliseconds, must be implemented when no RTOS is used
+uint32_t board_millis(void);
+
+#elif CFG_TUSB_OS == OPT_OS_FREERTOS
+static inline uint32_t board_millis(void) {
+  return ( ( ((uint64_t) xTaskGetTickCount()) * 1000) / configTICK_RATE_HZ );
+}
+
+#elif CFG_TUSB_OS == OPT_OS_MYNEWT
+static inline uint32_t board_millis(void) {
+  return os_time_ticks_to_ms32( os_time_get() );
+}
+
+#elif CFG_TUSB_OS == OPT_OS_PICO
+#include "pico/time.h"
+static inline uint32_t board_millis(void) {
+  return to_ms_since_boot(get_absolute_time());
+}
+
+#elif CFG_TUSB_OS == OPT_OS_RTTHREAD
+static inline uint32_t board_millis(void) {
+  return (((uint64_t)rt_tick_get()) * 1000 / RT_TICK_PER_SECOND);
+}
+
+#elif CFG_TUSB_OS == OPT_OS_CUSTOM
+// Implement your own board_millis() in any of .c file
+uint32_t board_millis(void);
+
+#elif CFG_TUSB_OS == OPT_OS_ZEPHYR
+static inline uint32_t board_millis(void) {
+  return k_uptime_get_32();
+}
+#else
+  #error "board_millis() is not implemented for this OS"
+#endif
+
+//--------------------------------------------------------------------+
+// Helper functions
+//--------------------------------------------------------------------+
+static inline void board_led_on(void) {
+  board_led_write(true);
+}
+
+static inline void board_led_off(void) {
+  board_led_write(false);
+}
+
+// Get USB Serial number string from unique ID if available. Return number of character.
+// Input is string descriptor from index 1 (index 0 is type + len)
+static inline size_t board_usb_get_serial(uint16_t desc_str1[], size_t max_chars) {
+  uint8_t uid[16] TU_ATTR_ALIGNED(4);
+  size_t uid_len;
+
+  // TODO work with make, but not working with esp32s3 cmake
+  uid_len = board_get_unique_id(uid, sizeof(uid));
+
+  if ( uid_len > max_chars / 2 ) uid_len = max_chars / 2;
+
+  for ( size_t i = 0; i < uid_len; i++ ) {
+    for ( size_t j = 0; j < 2; j++ ) {
+      const char nibble_to_hex[16] = {
+          '0', '1', '2', '3', '4', '5', '6', '7',
+          '8', '9', 'A', 'B', 'C', 'D', 'E', 'F'
+      };
+      uint8_t const nibble = (uid[i] >> (j * 4)) & 0xf;
+      desc_str1[i * 2 + (1 - j)] = nibble_to_hex[nibble]; // UTF-16-LE
+    }
+  }
+
+  return 2 * uid_len;
+}
+
+// TODO remove
+static inline void board_delay(uint32_t ms) {
+  uint32_t start_ms = board_millis();
+  while ( board_millis() - start_ms < ms ) {
+    // take chance to run usb background
+    #if CFG_TUD_ENABLED
+    tud_task();
+    #endif
+
+    #if CFG_TUH_ENABLED
+    tuh_task();
+    #endif
+  }
+}
+
+// stdio getchar() is blocking, this is non-blocking version
+int board_getchar(void);
+void board_putchar(int c);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif